Tikslus pristatymo terminas rodomas aukščiau ir apskaičiuojamas kiekvienai prekei individualiai. Pristatymas klientui nemokamas.
Aprašymas
Trumpai apie prekę
Prekė: Panardinamasis siurblys nešvariam ir lietaus vandeniui, 16 500 l/val. su plūde. Kategorija: Siurbliai ir hidroforai.
- Gamintojas: Lehmann
- Modelis: LGASP-1116
A flooded basement, a full rainwater tank, water in the trench? In such situations, you do not want to waste time manually selecting water or wonder if the pump can cope with dirt.
- ✅ Lehmann SP2 is a submersible pump for clean and dirty water, equipped with a 1100 W motor, automatic float and a system with a maximum capacity of 16 500 l/h.
High efficiency, handling up to 35 mm of contaminants and more convenient water level control – all in one device.
When there is water in the basement or the tank needs to be emptied, it is primarily important to remove it efficiently.
- ✅ Lehmann SP2 offers a maximum capacity of up to 16 500 litres per hour, which is up to 275 litres per minute under maximum flow conditions.
This is a great potential for pumping water when working at home, garden and on the plot. Actual performance depends on m.in. from lifting height, hose length and diameter and working conditions.
Water in excavations, wells or flooded rooms often contains sand, soil and other small impurities.
- ✅ The Lehmann pump supports water with solid particles up to 35 mm in size, so it is not limited to pumping clean water only.
This is a practical solution when dewatering places where dirt cannot be completely avoided.
When emptying the tank, you can not always stand next to the device and constantly observe the water level.
The automatic float switch controls the pump operation depending on the liquid level. It helps to reduce the risk of dry work and allows for more convenient handling during pumping.
- ✅ This is especially useful in tanks, wells and other places where the water level changes during operation.
The swimmer must be provided with freedom of movement in order to perform his function properly.
When you pump water from a well, tank or flooded space, access to an electrical outlet is not always right next door.
- ✅ The 10 meter long power cord makes it easy to place the pump in the workplace and properly guide the power supply.
In combination with the immersion design, it allows you to prepare the device for many typical works around the property.
The pump used in the garden, basement or tank has regular contact with moisture and pollution.
- ✅ The Lehmann SP2 construction uses stainless steel elements that support the corrosion resistance of selected parts of the device.
This is an important feature of equipment designed to work in immersion, especially with regular use and proper maintenance.
You do not need a separate device for each type of typical water pumping work.
Lehmann SP2 can be used to:
- ✅ water drainage of flooded basements and utility rooms,
- ✅ emptying pools and tanks,
- ✅ pumping rainwater,
- ✅ removal of water from excavations and wells,
- ✅ work at home, in the garden and on the farm.
One model for clean and dirty water, with automatic level control and the ability to handle specific solid impurities.
Are you looking for a powerful submersible pump for dirty and clean water that will work well with a flooded basement, emptying a tank, pool or well? Lehmann SP2 1100 W is an electric submersible pump with a maximum capacity of 16 500 l/h, lifting height up to 10,5 m and immersion depth up to 7 m.
- ✅ The automatic float controls the operation of the device depending on the water level, and the ability to pump liquids with impurities up to 35 mm increases the range of applications. The 10 m cable makes it easy to set up the pump when working in the garden, at home and on the plot.
Lehmann SP2 is a practical choice for those looking for an efficient pump for dewatering, pumping rainwater and removing dirty water without manually selecting it from the tank.
Are you looking for a pump that you can use not only to empty the pool, but also to emergency pump out dirty water?
Lehmann SP2 is worth choosing if:
- ✅ You care about high maximum pumping efficiency.
- ✅ You need a pump for clean and dirty water.
- ✅ You want to handle solid contaminants up to 35 mm.
- ✅ You appreciate the automatic float.
- ✅ You need a 10 m long power cord.
TECHNICAL SPECIFICATION
- Parameter: Value
- Brand: Lehmann
- Model: SP2
- Type: Submersible pump
- Engine power: 1100 W
- Max. Performance: 16 500 l/h
- Max. lift height: 10,5 m
- Hose diameter for connection: 1-1/2’
- Max. pressure: 1,05 bar
- Max. depth of immersion: 7 m
- Max. pollution size: 35 mm
- Float switch: Automatic
- Cable length: 10 m
- Max. water temperature: 35°C
- Stainless steel components: Yes
- Type of water pumped: Clean and dirty
Specifications
| Group | Name | Value |
|---|---|---|
| Parametry | Condition | new |
| Parametry | Invoice | With a VAT invoice |
| Parametry | Manufacturer | Lehmann |
| Parametry | Pump type | submersible |
| Parametry | Engine power | 1100 W |
| Parametry | Cable length | 10m |
| Parametry | Hydrophore capacity | 0 l |
| Parametry | Product weight with unit packaging | 7 kg |
| Parametry | Manufacturer code | LGASP-1116 |
| Parametry | EAN (GTIN) | 5905999061702 |
| Parametry | Batteries included | no |
| Parametry | Maximum pump output | 16500 l/h |
| Parametry | Packaging status | original |
| Parametry | Certificates of conformity | CE |



