Perforatorinis kūjis NAC SMART lagamine, 1300 W, 20 J, SDS MAX, reguliuojamas kaltas

Trumpai apie prekę

Prekė: Perforatorinis kūjis NAC SMART lagamine, 1300 W, 20 J, SDS MAX, reguliuojamas kaltas. Kategorija: Griovimo plaktukai.

• Gamintojas: NAC
• Modelis: 5905842533431
• Galia: 1300 W

Are you planning a renovation? NAC SMART NS-DH-20-SK is your answer to the toughest challenges: from old terracotta to concrete screeds. With its 20J impact force and optimal balance, this device turns tedious forging into fast and efficient operation.

▶ Technology that works for your success:

➡ Powerful 20 J Stroke: effectively crushes concrete, brick and stone, saving your strength.

➡ SDS-MAX system: guarantees lightning-fast, tool-free chisel replacement and stable power transmission.

➡ 12 chisel positions: angle adjustment allows for precise forging in corners and convenient removal of tiles.

➡ Continuous operation lock: enables long forging without the need for tiring holding the trigger.

➡ Full control: anti-slip handles and adjustable handle provide a secure, secure grip.

☄ Power that turns concrete into rubble

Experience the pure power of the 1300 W engine! Generating as much as 4000 beats per minute, this hammer turns concrete, brick and asphalt into rubble in no time. The device maintains constant operating parameters even at the greatest resistance, guaranteeing you instant and effective demolition without performance drops. This is the reliability you need for the toughest jobs.

☑ SDS MAX standard

Thanks to the 12-degree chisel angle adjustment⭐, you can precisely adjust the tool to work in any position, gaining full control even in the most difficult places.

✨Maximum convenience, zero wasted time.

✳ Anti-vibration system

The special design of the handle reduces the transmission of vibrations to the operator's arms. This allows you to work longer without discomfort, which is crucial for impact tools.

✅ Comprehensive adjustment

The auxiliary holder can be rotated 360 degrees around the axis of the device

⭐Whether you are right-handed or left-handed, you will always find the optimal position for work.

✨ EXPERT TIP

The longevity of the equipment will be ensured by two simple maintenance rules:

1. Lubricate the chisel before each use - apply a little grease to the mounting tip, which will reduce friction and protect the SDS-MAX handle.
2. Take care of the transmission - replace the grease in it every approx. 6 months of intensive work, which will maintain the full power of the stroke.

❇ This model is for you if:

▶ You are looking for a reliable tool for self-repair work and do not want to overpay for rent.

▶ You plan to cuff the old glaze, demolish partitions or crush concrete in the garden.

▶ You value independence and need equipment that combines high efficiency (20 J) with portability ideal for home conditions.

✅ What will you find in the set?

Complete starter package ready for action:

• Demolition hammer NS-DH-20-SK
• Auxiliary handle
• Chisel spike (18x320 mm) – for point crushing.
• Flat chisel (18x320 mm) – for precise cuffing.
• Container with grease – for maintenance of the handle.
• Service key – for inspection of the lubrication chamber.
• Polish manual and warranty card.

⚙ Technical specification

• Model: NS-DH-20-SK (Version 2025)
• Rated Power: 1300 W
• Stroke energy: 20 J
• Mounting System: SDS MAX
• Stroke frequency: 4000 strokes/min
• Handle Cover: Rubber
• Weight: 6 kg
• Power supply: 230 V
• Chisel Adjustment: Yes (12 positions)

✏ Frequently Asked Questions (Q&A)

1. How to replace chisels in SDS-MAX? The process is tool-free and fast. Pull back the handle locking sleeve, slide the chisel into the socket (turning it to feel resistance) and release the sleeve. A small working clearance of the chisel is a natural phenomenon.

2. How to care for the lubrication system? The device is pre-lubricated. The manufacturer recommends checking and replenishing the grease in the transmission every 6 months or so. Access to the chamber is located at the top of the body and is secured with a nut operated by the attached key.

3. Can you drill with a hammer? No, this model does not have a rotary function. It is used exclusively for forging, chiseling and demolition work.

4. What to do when the device heats up? The heating of the transmission housing is natural for impact work. In case of high temperature, take a 10-15 minute break to cool down the machine. Also remember to clean the ventilation openings regularly.

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With VAT invoice
Parametry	Brand	NAC
Parametry	Power	1300 W
Parametry	Type of handle	SDS Max
Parametry	Maximum impact frequency	4000 BPM
Parametry	Impact energy	20 J
Parametry	Device weight	6 kg
Parametry	Product weight with unit packaging	0 kg
Parametry	Manufacturer code	5905842533431
Parametry	EAN (GTIN)	5905842533431
Parametry	Batteries included	no
Parametry	Packaging status	original
Parametry	Customs tariff code	84672199