Perforatorius Procraft Industrial HD30A, 3,2 J, bešepetėlis, 20V, SDS-PLUS

Trumpai apie prekę

Prekė: Perforatorius Procraft Industrial HD30A, 3,2 J, bešepetėlis, 20V, SDS-PLUS. Kategorija: Perforatoriai.

• Gamintojas: Procraft
• Modelis: HD30A-BB

Contents of the set:

• Cordless hammer drill Procraft Industrial HD30A
• Additional handle
• Depth limiter
• User manual

Note! The battery and charger are not included. Recommended battery 20V 4Ah Procraft 20/4 or 8Ah Procraft 20/8.

Drilling in concrete and brick – impact energy of 3,2 J and frequency up to 4440 thighs. /min ensure efficient operation when making holes in hard materials.

Punching and forging – the device will work well during local demolition works, making furrows and removing fragments of material.

Installation work – suitable for making holes for fastenings, electrical installations, water, heating and other mounting elements.

Renovation and finishing works – the possibility of cooperation with the DE-01 system is particularly useful when drilling in rooms where it is important to reduce the amount of dust.

Working in the field – 20 V battery power supply allows you to use the hammer drill in places without access to the electrical network.

Why choose Procraft Industrial HD30A?

The Procraft Industrial HD30A combines 3,2 J impact energy, brushless motor and compact design with advanced solutions to increase control over the device. Six speed levels, Pulse mode, reverse, memory function and four operating modes allow you to customize the hammer drill for a variety of tasks. Kick Back Control and overload protection increase safety during demanding work. An additional advantage is the possibility of combining the hammer drill with the Procraft Industrial DE-01 dust extraction system, which helps to reduce dust directly during drilling.

Brushless Motor

The modern brushless motor provides high efficiency, longer service life and lower service requirements compared to traditional brush designs.

Energy of stroke 3,2 J

The high energy of a single impact allows you to effectively drill and perform chiseling work in concrete, brick and other hard materials.

Up to 4440 beats per minute

The high impact frequency ensures efficient hole making and efficient work during mineral materials processing.

4 operating modes

The hammer drill offers four operating settings, allowing you to customize the operation of the device to your current task, including drilling, impact drilling, and chiseling.

6 speed levels

The ability to choose one of six levels makes it easy to adjust the parameters to the type of material and equipment used.

Smooth speed control

The rotation speed is integrated into the switch, which allows the user to control the rotation during operation. The maximum speed is 1080 rpm /min.

Pulse mode

An additional pulse mode extends the capabilities of the hammer drill and allows you to adjust the nature of the device to the task at hand.

Memory function

The device is equipped with a memory function that increases convenience when working with selected settings.

Reverse – right/left rotation

Changing the direction of rotation makes it easier to withdraw the drill from the hole and increases the versatility of the device.

Kick Back Control – recoil protection

The system reduces the risk of a hammer drill jerking suddenly if a drill or chisel is jammed, increasing safety and control over the device.

Overload protection

Electronic protection helps protect the engine and other components from overloading.

SDS Plus holder

The popular clamping system allows quick replacement of drills and chisels and ensures effective transfer of impact energy.

Drilling in concrete up to 26 mm

The device allows you to make holes with a maximum diameter of 26 mm in concrete, 13 mm in metal and 30 mm in wood using appropriate accessories.

Compatibility with dust extraction system DE-01

A dedicated Procraft Industrial DE-01 dust extraction system can be connected to the hammer drill. It collects dust directly at the drilling site, helping to maintain a cleaner workstation and improving visibility.

Working lighting

Built-in lighting improves the visibility of the drilling site in less illuminated spaces.

Battery power supply 20 V

The lack of a power cord ensures full mobility during work on the construction site, during renovation and in places without access to the electrical network.

• No-load rotation speed: 0–1080 rpm /min
• Stroke frequency: 0 – 4440 ud. /min
• Number of operating modes: 4
• Degree of protection: IPX0
• Protection class: III
• Weight without battery: 2,82 kg
• EPTA weight with 4 Ah battery: 3,47 kg
• Weight with accessories: 3,9 kg

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With VAT invoice
Parametry	Series	Procraft Industrial
Parametry	Brand	Procraft
Parametry	Functionality	3-functions (drilling with/without impact, chasing)
Parametry	Power supply	rechargeable battery
Parametry	Maximum power	0 W
Parametry	Impact energy	3.2 J
Parametry	Handle type	SDS Plus
Parametry	Rotational speed	1080 RPM
Parametry	Manufacturer code	HD30A-BB
Parametry	EAN (GTIN)	6978880184902
Parametry	Packaging status	original
Parametry	Number of batteries	brak akumulatora