Perforatorius su smūgiu 1,5 J SDS Plus NAC SMART BODY

Trumpai apie prekę

Prekė: Perforatorius su smūgiu 1,5 J SDS Plus NAC SMART BODY. Kategorija: Perforatoriai.

• Gamintojas: NAC
• Modelis: 5905842532069
• Įtampa: 20 V

NAC SMART NS-RH-20V-B (BODY)

NAC SMART, instead of promising, just does the job☄

Hammer drill with impact NS-RH-20V-B: agile, light and reliable in handling, easily transitions from precision drilling to strong impact.

In addition, full freedom without cable and ergonomic handle that does not tire your hands.

In short: a tool that likes fast pace and does not make scenes✌

⚡Work without interruptions

Want to work longer? For best results and maximum long run time on a single charge, we recommend choosing the NAC Smart 4Ah battery.

☑ Operate SMART with NAC

✔ 1,5 J stroke + 0 – 900 rpm /min: rapid progress in concrete and masonry

✔ SDS-Plus: instant drill change, secure attachment

✔ 2 operating modes: drilling with impact and drilling without impact

✔ Compact 1,4 kg: better control over the tool, less fatigue

✔ LED + rubberized handle: you see the drilling point, you hold securely

✔ Common 20V system: one battery for multiple tools NAC SMART

‼ NOTE‼ The tool is sold without battery and charger

❇ Power and efficiency in practice

The energy of 1,5 J and the frequency of 5100 strokes/min translate into fast, clean holes in typical building materials.

Smooth trigger control facilitates precise drilling, and 0 – 900 rpm /min allows you to choose the tempo for the material.

✳ Drilling range (max. )

• Concrete: up to 12 mm
• Wood: up to 25 mm
• Steel: up to 10 mm

❇ SDS PLUS system

No more wasting time looking for keys to the handle!

Thanks to the SDS PLUS system, changing drills and chisels is quick, simple and tool-free. You can focus on the work, not the operation of the tool.

❇ One tool, two scenarios

You have two operating modes to choose from: drilling and impact drilling.

In the first you will make clean, precise holes in wood, metal or tiles - without unnecessary vibrations.

When you hit tharder material, like brick or concrete, switch to impact and let the mechanism “crush” the resistance, so that the work goes faster. The lock switch works intuitively, and it takes a while to change the mode when the tool stops.

❇ Ergonomics on a daily basis

The 1,4 kg body, rubberized handle, LED backlight and change of direction increase control, visibility and comfort - also when working overhead or in low light.

☑ One battery for multiple tools

⚡Battery hammer drill NAC SMART NS-RH-20V-B works in the NAC SMART 20V system

Do you have batteries from other NAC SMART tools? They also fit here. Depending on your needs, choose a battery with a capacity of:

• 2.0 Ah,
• 4.0 Ah.

You decide how long you want to work.

Compatible chargers:: NS-WC-20V and NS-FC-20V.

‼ NOTE‼ The tool is sold without battery and charger

☑ A must have in your workshop

✔ Assembly of shelves, cabinets and TV mount: precise holes for studs and anchors in brick and concrete walls

✔ Electrics and accessories: drilling for cans, troughs, strips and cable culverts

✔ Constructions and profiles: holes for dowels when erecting walls, suspended ceilings and grates

✔ Garage and workshop: assembly of racks, tool holders, slats and hooks

✔ Repair work: fast drilling in hard substrates during renovations and interior adaptations

❇ Best practices for using a cordless hammer drill

• Use only SDS-Plus hardware suitable for the material
• Switch mode only when the tool stops
• Don't push too hard - stroke does the job
• Clean and lightly lubricate the attachment pin before installation

❇ Contents of the set

• Body NS-RH-20V-B (without battery and charger)
• Instruction, card and warranty conditions,
• EC declaration of conformity*

* EC certificate of conformity is a confirmation that the device you purchased meets all the essential health and safety requirements laid down when using the equipment.

✏ Technical data

• Power supply: 20 V DC
• No-load speed: 0 – 900 min⁻¹
• Frequency of strokes: 5100 min⁻¹
• Energy of stroke: 1,5 J
• Max. drilling diameters: wood 25 mm; concrete 12 mm; steel 10 mm
• Mounting system: SDS-Plus
• Protection class: III
• Mass (without battery): 1,4 kg
• Working modes: drilling; impact drilling
• Year of manufacture: 2025
• Battery (sold separately): 20V Li-Ion 2,0 Ah (NS-20V-2A) / 4,0 Ah (NS-20V-4A)
• Chargers (sold separately): NS-WC-20V / NS-FC-20V

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With VAT invoice
Parametry	Series	NAC SMART
Parametry	Brand	NAC
Parametry	Functionality	2 functions (drilling with/without impact)
Parametry	Power supply	rechargeable battery
Parametry	Supply voltage	20 V
Parametry	Maximum power	0 W
Parametry	Impact energy	1.5 J
Parametry	Maximum number of strokes	5100
Parametry	Handle type	SDS Plus
Parametry	Rotational speed	900 RPM
Parametry	Maximum drilling diameter in wood	25 mm
Parametry	Maximum drilling diameter in concrete	12 mm
Parametry	Maximum drilling diameter in metal	10 mm
Parametry	Device weight	1.4 kg
Parametry	Manufacturer code	5905842532069
Parametry	EAN (GTIN)	5905842532069
Parametry	Batteries included	no
Parametry	Packaging status	original
Parametry	Certificates of conformity	CE