Polimeriniai klijai 400 g, atsparūs vandeniui PVC baseinams ir pripučiamiems čiužiniams

Trumpai apie prekę

Prekė: Polimeriniai klijai 400 g, atsparūs vandeniui PVC baseinams ir pripučiamiems čiužiniams. Kategorija: Daugiafunkciai įrankiai.

• Gamintojas: Daro Narzędzia
• Modelis: Klej Do Basenów Do Klejenia Na Sucho Mokro

☑ Content of the offer

⭐ Hybrid polymer adhesive DN KAZUAR H49 AQUA for repairing PVC / PVC pools 400 g – 1 pc.

☑ HYBRID POLYMER ADHESIVE for PVC / PVC pools

➡ DN KAZUAR H49 AQUA adhesive is used for permanent repair of swimming pools made of PVC / PCV. It can be used dry, on wet surfaces and directly under water, so that in many cases the repair can be done without emptying the pool.

⭐ Creates a waterproof and flexible connection, resistant to the work of the pool material.

⭐ Allows you to repair tears, cracks and small holes in the walls and bottom of the pool.

⭐ It can be used to stick a properly selected PVC / PCV patch, which must be prepared separately.

⭐ It can be a more durable solution than ad hoc protection of damage with waterproof tape or a simple adhesive patch.

☑ Application of glue – swimming pools and other applications

➡ DN KAZUAR H49 AQUA hybrid polymer adhesive can be used to repair and seal garden pools made of compatible PVC / PCV material. It will work both during repairs performed on a dry surface and on wet ground.

⭐ Repair of cracks, cuts and small holes in the side walls of the pool

⭐ Sealing damage to the bottom of the pool

⭐ Additional sealing of minor damage to seams and corners

⭐ Strengthening areas exposed to further tearing or leakage

➡ After checking the material and performing adhesion tests, the adhesive can also be used for selected recreational accessories, such as swimming wheels, water mattresses and inflatable castles, slides and playgrounds.

➡ The product also has a wide range of applications outside the summer season, including automotive, construction, construction, boats, motorhomes, caravans, containers and ventilation elements.

☑ What should I prepare myself?

➡ Depending on the type of repair, prepare appropriate auxiliary accessories:

⭐ properly selected PVC / PCV patch

⭐ sandpaper with gradation 120 – 200

⭐ isopropyl alcohol or other degreasing agent

⭐ protective gloves

⭐ scissors for trimming the patch

⭐ cartouche squeezer

How to glue dry? :

1 Cleaning of the gluing site:

⭐ Remove any deposits from the gluing site. You can do it with a brush, cloth or sponge.

⭐ Make sure the place is clean even if it is wet.

2 Patch trimming:

⭐ Trim the patch so that it is 3-5 cm larger than the damage.

⭐ For small holes, a patch of about 1-2 cm larger than the hole is enough.

3 Surface preparation:

⭐ Wipe both the patch and the gluing site with 120 – 200 gradation sandpaper to increase adhesive adhesion.

⭐ After tarnishing the surface, remove the resulting dust.

4 Degreasing:

⭐ Use isopropyl alcohol or other degreasing agent to clean the patch and the gluing site.

5 Glue application:

⭐ Apply glue to the patch linearly and around the edges.

⭐ Spread the glue evenly.

⭐ Press the patch to the damaged area.

6 Curing:

⭐ Minimum 24 hours before the adhesive reaches full strength.

⭐ If the layer is thicker or the patch is large, the glue may dry for several days.

How to glue wet (from the inside)? :

1 Cleaning of the gluing site:

⭐ Remove any deposits from the gluing site. You can do it with a brush, cloth or sponge.

⭐ Make sure the place is clean even if it is wet.

2 Patch trimming:

⭐ Trim the patch so that it is 3-5 cm larger than the damage.

⭐ For small holes, a patch of about 1-2 cm larger than the hole is enough.

3 Surface preparation:

⭐ Wipe both the patch and the gluing site with 120 – 200 gradation sandpaper to increase adhesive adhesion.

⭐ After tarnishing the surface, remove the resulting dust.

4 Degreasing:

⭐ Use isopropyl alcohol or other degreasing agent to clean the patch.

5 Glue application:

⭐ Apply glue to the patch linearly and around the edges.

⭐ Spread the glue evenly.

⭐ Apply the patch in water so that the damage is in the middle of the patch.

⭐ Press firmly to ensure good adhesion of glue and patches to the damaged surface.

6 Curing:

⭐ Minimum 24 hours before the adhesive reaches full strength.

⭐ If the layer is thicker or the patch is large, the glue may dry for several days.

☑ What pools can glue be used for?

➡ KAZUAR hybrid polymer adhesive can be used to repair various types of garden pools if the repaired surface is made of compatible PVC / PCV material. It will work well for damage to walls, bottom and places requiring additional sealing.

⭐ frame pools with PVC / PVC surface

⭐ expansion pools with PVC / PVC surface

⭐ Inflatable pools made of PVC/PVC

⭐ garden pools lined with PVC / PVC film

⭐ ground pools lined with PVC / PVC membrane

⭐ Inflatable and expansion garden jacuzzi made of PVC / PVC

⭐ Inflatable for children made of compatible PVC/PVC material

☑ Advantages and features of HYBRID POLYMER ADHESIVE

➡ Adhesive after curing creates a durable, waterproof and flexible connection, resistant to the work of the repaired material.

⭐ Allows dry bonding, on wet surfaces and directly under water.

⭐ It saves time and water, because in many cases the pool does not need to be emptied before repair.

⭐ After curing, it retains flexibility and is resistant to stresses arising during the use of the pool.

⭐ Creates a tight connection that can work together with the repaired PVC/PVC material.

⭐ It is resistant to water, salt water, atmospheric factors and UV radiation.

⭐ Does not contain solvents and is characterized by low odor intensity.

☑ Important information before starting repairs

➡ Before gluing, carefully read the instructions appropriate for the selected method of repair: dry or underwater from the inside of the pool.

⭐ When working, use protective gloves, which must be prepared yourself.

⭐ The adhesive surface should be thoroughly cleaned of sediment, dust, grease and residues of the old adhesive.

⭐ Extensive damage, valve damage and heavily loaded seams should be assessed individually before repair.

➡ Before applying the adhesive on an unusual surface, check the type of material and perform a adhesion test on a small fragment. The adhesive is not intended, among others, for surfaces made of PE, PP, PC, PMMA, PTFE, soft plastics, neoprene and bituminous materials.

☑ Glue specifications

⭐ Product type: adhesive and hybrid sealant

⭐ Base: MS Polymer

⭐ Packaging: cartridge 400 g

⭐ Colour: white

⭐ Application method: cartouche squeezer

⭐ Epidermal formation time: about 25 minutes

⭐ Curing temperature: about 2 mm in 24 hours

⭐ Application temperature: from 0°C to +40°C

⭐ Thermal resistance after curing: from -40°C to +90°C

⭐ Elongation at break: above 700%

⭐ Tensile strength: 2,0 N/mm²

⭐ Volume spasm: less than 5%

⭐ Water and salt water resistance: YES

⭐ Atmospheric resistance: YES

⭐ Solvent-free, low odor product

☑ Content of the offer

⭐ Hybrid polymer adhesive DN KAZUAR H49 AQUA for pool repair PVC / PCV 400 g – 1 pc.

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With VAT invoice
Parametry	Brand	Daro Narzędzia
Parametry	Manufacturer code	Klej Do Basenów Do Klejenia Na Sucho Mokro
Parametry	EAN (GTIN)	5904507001186
Parametry	Product weight with unit packaging	0.488 kg
Parametry	Packaging status	original