Poliravimo rinkinys: odinė šluostė, deimantinė pasta, valymo kubelis

Trumpai apie prekę

Prekė: Poliravimo rinkinys: odinė šluostė, deimantinė pasta, valymo kubelis. Kategorija: Įrankių galąstuvai.

• Gamintojas: no brand
• Modelis: MBZES03

Ceiling with diamond paste and ceiling cleaning cube - polishing and cleaning kit

The diamond paste ceiling is a set that will allow you to get the maximum sharpness out of your knife right after sharpening on the stones. The natural rubber cube also provides easy and quick cleaning of the ceiling. So you will find everything you need for polishing, regular cleaning and maintaining the ceiling in good condition.

Why Diamond Grain

Diamond is the hardest material known. Diamond grain knife sharpening paste works faster and more evenly than alumina or chromium oxide based pastes.

With harder steels, these pastes are not able to effectively file them. The diamond is several times harder than them. 1 µm granulation means that abrasive particles have a diameter of one micrometer – this is the equivalent of mirror polishing, removing the smallest scratches and burrs from the cutting edge.

Traditional pastes based on chromium oxide or iron have a hardness of approx. 9 on the Mohs scale. The diamond is 10 — and therefore where other pastes slide over the steel, the diamond actually polishes it.

What you will find in the set

Strop are two pieces of thick leather, glued on a wooden base. The ceiling has two sides: with a mizdra (matte, suede side), on which we apply the paste, and a face (smooth, outer side), which is used for the final smoothing without paste.

Diamond paste 1 µm in an aluminum 2g crucible — enough for many months of regular polishing.

Leather applicator for applying paste

QuickWood cube is a natural rubber without fillers, for quick cleaning of the ceiling.

Why is it worth polishing on the ceiling?

1. Removing burrs - leather ceiling, gently but effectively removes micro burrs after pre-sharpening. Pulling the blade over the ceiling causes them to straighten and then tear off.
2. Smoothing edges - polishing makes the cutting edge extremely smooth and uniform. This is the most important step to achieving the best focus.
3. Easy to focus - you can use the ceiling even before each start of work. Without any preparation, you simply move the knife several times and straighten the micro-pollutants from the previous use.
4. Cleaner cutting - polished blade passes through the material without resistance, leaving smooth, clean edges

How to use the kit?

- Apply paste to ceiling

Always apply the paste to the mizdra – matte, rough side of the skin. Use the included piece of leather to apply. Apply a small amount in several places and with an applicator or finger, spread a thin layer of paste. Diamond paste does not wear out quickly. One layer on the ceiling can be used for multiple polishing sessions.

- Polishing on the ceiling

Always move the blade towards the back (backwards) so as not to cut the skin. After several movements, black marks will appear on the skin – this is a sign that the diamond works and collects steel.

Use the smooth side to finally polish the blade. After achieving the right effect, wipe the knife with a cloth and enjoy perfect sharpness.

- Cleaning the ceiling with a cube

When the ceiling was clearly darkening, the fibers filled with old metal filings and ceased to give a noticeable resistance, wipe its surface with a cleaning cube, a few movements along the skin. The cube will wipe off the old paste and metal filings. The whole process takes a while, the cube collects paste and filings without affecting the skin fibers.

Once the ceiling is clean, apply a little fresh paste and the ceiling catches the blade again as it should.

EXPERT GUIDANCE

1. ...after polishing, I still see scratches on the blade? 1 micron paste is used for mirror finish (Mirror Finish). If after using it you still see deep scratches, it means that they are a remnant of the earlier stages of sharpening (too thick stones).

Solution: You need to go back to water stones with a higher gradation (e.g. 3000-5000) and lead the smooth edge out there before you go to the ceiling. The ceiling is a perfect finish, but it will not even out deeper scratches.

2. ...the knife instead of sharper, seems more blunt? This is a classic edge rounding error. This happens when you use too much downforce or too much angle. The leather is elastic – if you press hard, it will “flank” the blade and round the very tip of the cutting edge.

Solution: Reduce downforce. Let diamond paste work, not the strength of your hands. Often the weight of the knife alone is enough.

3. ...the alloy has become completely black and slippery? This is a natural process – black is grated steel (work). However, if the layer of dirt is so thick that the ceiling stops “taking” and only glides over the metal, it’s time to clean.

Solution: Wipe the entire work surface with a rubber cube – just like an eraser on paper. The cube will wipe off the grayed-out paste on itself. After that, on a clean ceiling, apply fresh paste and polish further.

Set specification

Strop:

Dimensions: 15 x 5 x 1,6 cm

Material: wood (spruce) and vegetable tanned bovine leather (gr. 3 mm)

Cleaning cube:

Material: natural rubber

Dimensions: approx. 3,5 x 3,5 x 2 cm

Diamond paste:

Polishing paste, diamond 1 µm

Quantity: 2 g

Specifications