Pramoninis oro sausintuvas EPD 70, 70 l/24 val.

Trumpai apie prekę

Prekė: Pramoninis oro sausintuvas EPD 70, 70 l/24 val.. Kategorija: Oro sausintuvai.

• Gamintojas: EBERG
• Modelis: EPD 70
• Galia: 860 W

Professional solution to the problem of excessive air moisture even in very large rooms!

☑ High dehumidification efficiency - 70l per day (30°C RH80%)

☑ Optimal dimensions and high power - ideal for large rooms, construction sites, basements, etc.

☑ Easy to transport - thanks to the large wheels and folding handles, you can easily transport it even on uneven terrain.

☑ TIMER 24H - easy management of the operating time of the device

☑ LED display with humidity level indicator

☑ Removable tank with a capacity of up to 5,5l

☑ Possibility of continuous drainage

☑ Built-in settings memory - an indispensable solution during a power outage or accidental disconnection of the plug.

☑ Robust construction

EBERG® industrial dehumidifiers are equipped with compressors from the renowned GMCC company – the largest and most advanced manufacturer of rotary compressors in the world, which guarantees reliability and high efficiency of the device.

✔ By optimizing the design and quality of components, our model combines high efficiency with energy efficiency. This is the equipment that works for you – efficiently, economically and professionally.

✔ Large tank up to 5,5l

A large tank will allow for effective and long work. When it is full, the device will go into standby mode, the indicator light will light up on the display and an audible alarm will sound.

✔ Direct and continuous drainage of water

EBERG® EPD also gives you the ability to continuously drain water with the included hose. The device has a dedicated drainage hole that allows for continuous drainage of water.

In order to run continuous drainage, you must:

1. Connect the PVC tube (supplied in the kit) to the drain nozzle, which is located on the right side of the device.
2. Lead the wire out through the hole in the dehumidifier housing.
3. Make sure that the end of the hose is placed lower than the drain hole, otherwise the water will not drain and flooding may occur.

✔ Cable holder- a special holder on the back of the case allows you to wrap the power cord so that it does not interfere with the transport of the device.

✔ Transport wheels- the dehumidifier has 2 large self-supporting wheels and 2 smaller self-aligning wheels with lock. Thanks to this, transporting the device despite its weight is very easy even in more difficult terrain.

• Self-aligning casters with lock are two compact 360° rotating elements that automatically adjust to the direction of travel, ensuring full maneuverability and easy maneuverability of the device. The built-in locking mechanism stabilizes the dehumidifier during operation, eliminating the risk of accidental displacement. It is a perfect combination of comfortable mobility and safe use.

✔ Handle with soft foam- allows comfortable transport of the device thanks to the ergonomic handle upholstered with a sponge, which provides a comfortable grip. The handle can be quickly folded to limit the space occupied — the perfect solution for easy storage. Additionally, the soft foam prevents accidental bumping of walls or furniture when moving the device, making it an ideal choice for use in interiors requiring special care.

✔ Folding handle The folding mechanism is extremely simple – just unscrew the two butterfly screws to quickly fold the handle and save space when storing or transporting. Thoughtful design increases the convenience and functionality of the device.

✔ Folding side handles designed with user comfort in mind – allow a secure grip and easy carrying of the device anywhere

• ✔ High dehumidification capacity - up to 70l/24h (30°C RH80%)
• ✔ Removable tank with a capacity of up to 5,5l - ensures easy emptying
• ✔ Continuous drainage capability (+snake included)
• ✔ Automatic mode
• ✔ Intelligent control system – automatically detects excess moisture and starts dehumidification until the set humidity is reached.
• ✔ Intuitive touch control panel with LED display
• ✔ TIMER 24H
• ✔ Washable pre-filter
• ✔ Humidity level indicator
• ✔ Automatic defrosting
• ✔ Autostart after power loss with settings memory
• ✔ Robust housing made of thick sheet metal protected against corrosion.
• ✔ Handle and large wheels for easy carrying of the device even on uneven terrain

Thanks to the location of the control panel on the front of the device, the digital LED display is perfectly visible even from a greater distance. This is extremely important during the work – the operator does not have to interrupt activities to quickly check the settings, which translates into greater efficiency and convenience of use.

1. ON/OFF button
2. Time programmer 1-24h
3. Increasing value
4. Decrease in value
5. Continuous dehumidification mode
6. Indicator of the TIMER function
7. Defrost Function Indicator
8. Continuous dehumidification function indicator
9. Full Tank Function Indicator
10. Digital LED display - clearly shows the set humidity level

Plan your activities with 2 operating modes to choose from

• Continuous 'CONT' - the device will work continuously regardless of the current humidity level
• Automatic - the device can work to a set humidity in the range of 20-90%. This mode allows you to precisely maintain a given humidity level and save energy by switching the device in standby mode when the humidity level falls below the setting. When this level rises again, the device will start automatically.

thanks to the compressor refrigeration system

The device removes moisture from the air, using condensation of water vapor through a compressor refrigeration system. In this very simple way, we reduce the water content in the air, i.e. we reduce the humidity of the room wherever we want to remove excessive moisture from the room. As a result of lowering the condenser temperature below the dew point temperature, moisture contained in the air flows through the exchanger, and then the condensate is discharged into the water tank or discharged using a hose. The air thus dried is heated and forced back into the dried room.

The washable air filter protects the device from any contaminants/dust, ensuring that the device will work efficiently and trouble-free for years to come. The filter can be easily removed and washed under running water. The door with the filter is closed with a magnet, which allows for tool-free removal of the filter in an easy and quick way.

The device is perfect for:

• on the construction site - supporting the drying process of fresh plasters, screeds, walls, etc.
• in rooms or halls with inefficient ventilation
• all buildings after flooding, or flooding or with high groundwater levels
• in buildings with a leaky roof, with water and sewage problems
• for any renovation work when the paint/mortar/concrete does not want to dry.
• in production halls / sports halls / gyms, where many people are staying at the same time.
• in production plants requiring maintenance and control of humidity levels

• Automatic defrosting - The device will automatically start the defrosting process when the coil sensor detects that the temperature is too low, at the same time the defrost function light will light up. After the defrosting process is complete, the device will return to its previous operating mode.
• Automatic shutdown - After filling the tank, the device will interrupt the dehumidification process and inform the user about it using a control diode and alarm. After inserting the emptied tank, the device will resume operation.
• Hermetic system - Factory sealed refrigeration system guarantees tightness and reliable operation of the device.
• Overload protection - In case of power loss, in order to protect the compressor, there is a 3-minute delay of restarting the compressor.
• Memory function of the last settings - In case of sudden power failure or accidental disconnection of the power plug, after restoring power, the device will start automatically, with the last set settings. The operation of the device will continue until the next shutdown of the device.

• Dehumidification capacity: 70l/24h (30°C RH80%), 40l/24h (27°C RH60%)
• Water tank: 5,5l
• Airflow: 450m3/h
• Continuous drainage: Possibility to connect the condensate drainage tube directly to the outside of the device (included)
• Filtration: Pre-Filter
• Ecological refrigerant: R290 (230g)
• Degree of protection: IPX0
• Maximum rated power consumption: 860W (30°C RH80%)
• Supply Voltage: 220-240V
• Frequency: 50Hz
• Volume: MAX 52dB(A)
• Product Dimensions: 47,7x51,8x84cm
• Weight: 38kg
• Manufacturer: EBERG®

1. Dehumidifier EBERG® EPD 70
2. Water tank: 5,5l
3. Drainage hose 2m
4. Instruction manual in Polish.

• How much should the filter be replaced? - The filter is washable and does not require replacement. It is enough to regularly wash the filter under running water, dry and put back in the device.
• How many m2 is enough/for what size of rooms will it work? - The efficiency of the dehumidifier depends on the air parameters in the room and the effect we want to achieve. The EPD series is designed for large rooms over 35m2, industrial halls, etc. and wherever the amount of moisture gains is very large.

Specifications