Pramoninis oro sausintuvas su kondensato siurbliu HM-484, 100 l/24 val.

Trumpai apie prekę

Prekė: Pramoninis oro sausintuvas su kondensato siurbliu HM-484, 100 l/24 val.. Kategorija: Oro sausintuvai.

• Gamintojas: HUMBERG
• Modelis: HM-484
• Galia: 840 W

Industrial dehumidifier 100 l/24 h

Humberg: HM-484

✔ Effectively accelerates the drying of floors, plaster, paints, soaked walls and other rooms exposed to moisture.

• 100 LITERS for 24 hours! - very high dehumidification efficiency
• Water pump - allows you to pump condensate to a higher point of drainage, e.g. through an ajar window or to a drain above the operating level of the device.
• High mobility - large wheels for free movement of the product.
• Affordable dimensions - will fit even in small rooms, such as a boiler room, storage room, etc.
• Silent operation - max 60 dB.
• Includes 6l tank and 10m drain hose.

Automatic defrosting of the evaporator.

The device itself ensures proper operation even at low temperatures. When after 30 minutes the evaporator temperature drops to ≤ -1°C, the defrost mode automatically turns on.

Functions and operating modes:

• 3 water drainage modes - The possibility of draining condensate into the internal tank, into the external vessel or using a pump.
• Timer 24 h - the ability to set the operating time of the device.
• Humidity control - setting the target humidity level in a wide range of 10 to 95%.
• Displaying the current humidity - a clear panel shows the current operating parameters.
• Automatic defrost - supports the proper operation of the device at lower temperatures.
• The device settings memory - the device remembers the last settings, so after a temporary power outage you do not need to set everything again.
• CO mode - continuous operation regardless of the conditions.
• Automatic stop at full tank - FULL indicator informs about the need to empty the tank.

✔ Also perfect for rooms below ground level. For drying: damp walls / floors / damp basements / rooms after flooding.

Built-in condensate pump and water drainage kit

The dehumidifier is equipped with a pump, which allows convenient pumping of condensate also to the higher point of the drain, e.g. through an ajar window or to a drain above the operating level of the device.

HAS:

• 10-meter drain hose,
• tip with mesh filter, which helps protect the system from larger contaminants.

3 ways to drain water

The dehumidifier allows convenient drainage of condensate in several ways - depending on the workplace and the available drain.

• Reservoir 6 l - convenient use without connecting a drain hose.
• Condensation pump - pumping water up, e.g. through an ajar window or to a higher drain.
• Gravity drain - hose guided downwards, e.g. to the drain grate or substituted vessel.

All-Weather Mobility

• Sturdy handle for moving the device.
• Large transport wheels for easy movement over uneven surfaces.
• Front 360° swivel casters with brake for easy maneuvering.
• Convenient to move around.

Assistance with drying after renovation

• It helps to reduce excess moisture in the room.
• Supports drying of plasters, finish coats, paints and floors.
• It makes it easier to prepare the interior for the next stages of finishing.
• The 6 l tank allows you to use the device without connecting the drain.

Up to 4-meter power cable

• Greater freedom to set the device in the room.
• Easier to connect even when the outlet is further away from the place of dehumidification.
• Convenient use on the construction site, attic, hall or technical room.

Easy filter maintenance

◾ Pre-filter (washable) protects the dehumidifier from dust and mechanical damage. Up to 3 layers for longer device life.

◾ HYGROSTAT plays a key role in automatic control of humidity levels in the room.

1. Humidity monitoring – Hygrostat constantly monitors the humidity level in the air.
2. Automatic on and off – When the humidity level in the room exceeds the set value, the hygrostat turns on the dehumidifier.
3. Maintaining optimal humidity levels – Thanks to precise humidity control, the hygrostat helps maintain optimal conditions for drying the building.

Control panel

1. FROST – defrost mode indicator
2. T ON/T OFF – on/off timer indicator
3. PUMP ON / ROOM TEMP – pump operating indicator and room temperature
4. DEHUM – dehumidification mode indicator
5. SET / CURRENT – set and current air humidity
6. FULL – indicator of a full water tank
7. Fan operating indicator – information about the operation of the air supply
8. MODE – selection of operating mode
9. Button "+" – increasing the set value
10. Button “–” – reducing the set value
11. POWER – turning the device on and off

Turn a damp room into a dry, usable space

The dehumidifier helps quickly reduce moisture after flooding, renovation or long dampening of the room. Thanks to this, the basement or garage can again be used to store tools, materials and equipment in better conditions.

Technical Specifications:

• Model: HUMBERG HM-484
• Power Supply: AC 220–240 V / 50 Hz
• Dehumidification Capacity: 55 L/24h at 27°C and 60% RH, max. 100 L/24h at 30°C and 80% RH
• Rated Power: 715 W
• Maximum Power: 840 W
• Rated Current: 3.3 A
• Maximum Current: 3.8 A
• Operating Temperature Range: 5–35°C
• Refrigerant: R290 / 210 g
• Water Tank Capacity: 6 L
• Sound Power Level: ≤60 dB(A)
• Unit Dimensions: 97cm x 50.5cm x 55cm
• Net Weight: 44 kg
• Protection Class: Class I

Set Contents:

• dehumidifier HUMBERG HM-484
• water tank 6 l
• drain hose for condensate drainage 10m
• hose tip with mesh filter
• power cord 4 m
• transport handle
• set of transport wheels
• instruction manual
• pre-filter (washable)

Specifications