Radijo imtuvas ELMES U1HS, 11–17V DC, su 2 UMB100HT pulteliais

Trumpai apie prekę

Prekė: Radijo imtuvas ELMES U1HS, 11–17V DC, su 2 UMB100HT pulteliais. Kategorija: Išoriniai moduliai.

• Gamintojas: Elmes
• Modelis: U1HS Radiolinia jedno-kanałowa 11...17VDC

U1HS - single channel radioline - ELMES

Set:

U1HR - radio receiver

UMB100HT - radio remote control - 2 pieces

The device is used in systems: remote control, access control, alarm systems and many others.

It can be used to switch on systems: controlling motors, lighting, electric strikes, releasing gate locks, doors,

switching on time corpses, as a wireless anti-pad button, etc.

Universal superheterodyne single channel radioline U1HS for remote control with a range of up to 100m in open area.

Alarm transmissions are dynamically encoded in the KEELOQ® system, ensuring the highest level of security.

The receiver tracks these changes and only responds to new code.

Codes once used are not accepted. This prevents the intercepted codes from being reused.

U1HR Receiver:

• KEELOQ® variable code system. Microchip Corp. USA
• pilot memory: 112 (up to 20 in C mode)
• superheterodyne radio receiver, sensitivity: -106 dBm and selectivity
• power supply: 11. .17VDC
• Current consumption: 20mA + 20mA for each included relay
• Operating temperature: from -20°C to +50°C
• Relay output load capacity: 1A, 120VAC/30VDC
• 2 output modes: 1 - monostable = output switching time from 0,25 sec. up to 4 hours / 2 - bistable = on / off
• output S (1A/60V) type "open collector"
• anti-sabotage output of housing opening signalling, type NC (compact with closed housing) used in alarm systems
• one relay output galvanically separated type NC/NO (normally compact or normally dilated),
• transistor output S type OC (open collector) for connecting acoustic signaling of relay output switching,
• two-color LED illuminating diode indicating the status of the relay output,
• dimensions in mm: 24/46/73

Receiver operating modes :

Since each remote has a different code, the receiver must remember the code of each new remote individually,

and the limited memory capacity allows you to remember up to 112 remotes.

The operation of the receiver relay output depends on the mono or bistable operating mode

The receiver is equipped with a relay output that allows you to control other devices.

3 relay contacts are output to the terminal block: normally open (NO) and normally shorted (NC) and one common terminal.

The receiver has an open collector transistor output (marked with the letter S)

intended to be combined with external acoustic or optical signalling.

The receiver has a two-tone LED light.

It signals the state of switching on the relay output (lights green) and turning off the output (lights red).

Remote control UMB100HT - 2 pcs.

Codes once used are not later accepted, co prevents from reusing captured codes.

• operating frequency 433,92MHz;
• power 3-5mW;
• range in open area approx. 100m
• 23A 12V battery - complete with remote control
• dimensions (L. /lat. /height ) 46/34/14mm

ALL RADIOLINES of the ELMES brand and other products are in adjacent auctions.

Specifications