Rekuperacinis sieninis įrenginys AIRDOT Link, 60 m³/h, tylus, 16 dB

Trumpai apie prekę

Prekė: Rekuperacinis sieninis įrenginys AIRDOT Link, 60 m³/h, tylus, 16 dB. Kategorija: Rekuperacinės vėdinimo sistemos.

• Gamintojas: Harmann
• Modelis: AIRDOT link

• High quality workmanship
• Quiet operation from 16 dB(A)
• Heat recovery efficiency up to 92 %
• Ceramic exchanger
• Hygrostat function
• Twilight sensor
• Night mode
• Four feet of fan speed
• Wired communication up to 16 devices

• Model: AIRDOT Link
• Air flow max: 60 m3/h
• Power max. 7 IN
• Sound pressure: from 16 dB(A)/3mb
• Voltage: 50Hz
• Power supply: 220-240Vac
• Temp. Environment: -30 +50˚C
• Degree of protection: IPX4
• Weight: 4,9 kg
• Manufacturer: HARMANN

  a) Easy version: - standalone work

  b) Link version: - wired communication of devices

  c) Link+ version: - wireless communication of devices

The AIRDOT zone recuperator effectively ventilates, removes excess moisture and controls its level in the room. It works cyclically as an air supply and extractor. It breathes fresh air, heated by previously accumulated heat.

The combination of devices into the system allows you to ventilate the entire volume.

The lack of negative impact on human health and the environment is confirmed by the PZH certificate.

In the basic version, AIRDOT Easy can work as a single device - but if greater efficiency is required, it is worth planning the installation of two units.

In the AIRDOT Link version, thanks to mutual wired communication, recuperators synchronize the air supply with the exhaust.

In the AIRDOT Link+ version, thanks to mutual wireless communication, recuperators synchronize the air supply with the exhaust.

The list of UTIs is an aid for applicants of the Clean Air Programme in the selection of equipment and materials eligible for funding.

- Extended to 150mm ceramic exchanger accumulates and recovers more heat up to 92 %

- High-performance EC motor with ball bearings guarantees low power consumption and long service life.

- Mute reverse fan located behind the exchanger, inside the wall.

- Tilting panel with the function of cutting off the cold air supply when the device is not working.

- Made from premium ABS material for durability and a sleek design.

- Washable dust filters make operating costs easier and less expensive.

- Ability to configure up to 16 devices via wired communication

- The standard channel allows you to mount the device in a partition with a thickness of 250-500mm.

- Protection rating IPX4 protects the device against atmospheric phenomena.

- Automatic restart after power failure allows you to forget about operating the device.

It adapts the work to the demand and combines the units into one system of efficient ventilation.

- Automatic mode - The recuperator operates at an average fan speed – cyclically for 70 seconds in exhaust mode and 70 seconds in supply mode. After pressing the “AUTO” button, the device performs a test of active sensors (twilight sensor, hygrostat and CO2, if any). If the value above the set parameter is read, the recuperator will start working in the maximum extract mode until the limit value is restored parameter

- Standby function (sleep mode) - The recuperator remains in sleep mode with the shutter closed, but the sensors remain active. If the air parameters change, for example when humidity or CO2 concentration rises above the set limit, the device automatically starts in exhaust mode at maximum speed. After equalizing the air parameters, the recuperator returns to standby mode. This type of operation of the device works well in the case of a long absence of household members.

- Hygrostat function with the possibility of selecting three values: 40% - 55% - 70% It is possible to set a maximum humidity threshold for the hygrostat to adapt it to the room in which it works. Once the relative humidity level is set, the device will draw air out of the room continuously until the sensor reading falls below the set value. In the case of combined operation of several units, all devices will work in extraction mode until the humidity drops to the desired value. By default, the level of H2 was set, which corresponds to the relative humidity at the RH level: 55%.

- Twilight sensor When reducing the intensity of light, the fan speed will be automatically set to a minimum to reduce noise.

- Adjusting the amount of supply air through the switch on the housing, remote control or wall switch (depending on the model).

Specification of the device in the basic version AIRDOT Easy (model available at our other auctions)

• Switch and gear switch on housing (two speeds)
• Diode indicating the operation of the device

Specification of the device in the version with wired communication AIRDOT Link (model offered at the above auction)

• Switch on the housing (possible remote control)
• Standby function (sleep mode)
• Hygrostat function
• Diode indicating the operation of the device and the need to clean the filter
• Four speed feet available, remote controlled
• Up to 16 devices can be connected via cable

Specification of the device in the version with wireless communication AIRDOT Link+ (model available at our other auctions)

• Switch on the housing (possible remote control)
• Standby function (sleep mode)
• Hygrostat function
• Diode indicating the operation of the device and the need to clean the filter
• Four degrees of speed, controlled by remote control
• Up to 16 devices can be configured via wireless communication

Specifications