Rekuperatoriaus Aeris Next 350/450/600 filtrų rinkinys, 2 vnt., M5/G4

Trumpai apie prekę

Prekė: Rekuperatoriaus Aeris Next 350/450/600 filtrų rinkinys, 2 vnt., M5/G4. Kategorija: Dalys.

• Gamintojas: Aeris
• Modelis: FILTR.AERIS.NEXT.PL.G4.WĘGLOWY.M5

Original pleated filters M5/G4 polish production for recuperators AERISnext 350, AERISnext 450, AERISnext 600

M5 carbon filters are filters with increased filtration class. This means that they retain a large part of the fine dust pollutants contained in the outside air. In the autumn and winter season, they can wear out quickly, which means that they need to be replaced more often than in the case of G4 filters. Both filters have a maximum filter surface and relatively low pre-resistance for air flow. Compared to G4 (coarse) filters, M5 filters provide higher filtration efficiency. Compared to more accurate filters (e.g. F7), M5 filters are usually characterized by lower air flow resistance and longer service life.

The carbon filter consists of two layers of filter cloth, between which there are active particles of activated carbon granules that reduce about 50% of NOx and SOx odors and gases in the air supplied to the building.

They are suitable for any AERISnext series recuperator regardless of the exchanger that the recuperator has: ordinary (VV) or enthalpic (ERV). The version of the recuperator does not matter either: right (R) or left (L).

• AERISnext 350
• AERISnext 450
• AERISnext 600

These filters do not fit the older version of the AERIS base/CA series recuperators produced until 2016! See the picture of the device at the top of this tab and compare it with your recuperator.

How often to replace M5/G4 polish production pleated filters in AERISnext recuperators

The estimated lifespan of activated charcoal is up to 90 days. The actual life of activated carbon depends on the amount of pollutants contained in the external air, the filter is active as long as the carbon contained in it can absorb (absorb) gases and odors.

The basis for filter contamination signaling in AERISnext recuperators is the time or amount of filtered air. The filter replacement message appears after the time set on the controller or filtering a certain amount of m³ air (whichever comes first). It is recommended to visually inspect the filter once every 1 month despite the lack of a message about the need to replace the filters. If necessary, vacuum the excess accumulated on the surface of impurities.

Filters are suitable for a single dry cleaning (cleaning). Filters should not be soaked, as they will lose their filtration properties.

How to install the M5 polish production carbon filter in the AERISnext recuperator

The filters are equipped with sealing flaps on both sides, which perform the function of sealing the filter chamber so that 100% of the air flows through the filter. On the front of the filters there are special tabs for easy removal of the filter from the device. When replacing filters, pay attention to the arrangement of sealing flaps (always up) and the correct position of filters in the recuperator. Filters have markings with the correct mounting position (one side up).

The carbon filter should be placed on the side of the intake and launcher channels. In the recuperator in the right version (R), the carbon filter should be placed on the left. In the recuperator in the left version (L), the carbon filter should be placed on the right side. Do not suggest information from the device nameplate. The actual version of the recuperator can be read on the controller located on the housing: MENU-->STATUS-->UNIT-->UNIT TYPE

Pleated filters M5/G4 polish production for AERISnext - set contents

Filtration class | Dimension | Purpose

G4/ISO COARSE | 160 x 500 x 25 mm | exhaust

M5 Carbon/ePM10 |160 x 500 x 25 mm | air supply

The most important features of the M5/G4 polish production filters for the AERISnext recuperator

• suitable for all AERISnext recuperators
• No tools are required for their installation
• meet the requirements of ISO 16890
• new product

Specifications