Rekuperatorius Vortice VORT HRW 40 MONO EVO HCS su Wi-Fi

Trumpai apie prekę

Prekė: Rekuperatorius Vortice VORT HRW 40 MONO EVO HCS su Wi-Fi. Kategorija: Rekuperacinės vėdinimo sistemos.

• Gamintojas: Vortice
• Modelis: 12442

Producer: Vortice

Condition: new

Packaging: original

Origin: official distribution

Warranty: manufacturer

Vortice VORT HRW 40 MONO EVO HCS WI-FI heat recovery unit

Vortice VORT HRW 40 MONO EVO HCS WI-FI heat recovery unit is a decentralized ventilation unit with heat recovery, designed for wall mounting in residential and commercial spaces. Vortice VORT HRW 40 MONO EVO HCS WI-FI model will prove useful wherever effective air exchange is needed without the need for extensive duct installation. The device can be used in flats, houses, apartments, offices, and commercial premises, especially in buildings with high airtightness and good thermal insulation.

Vortice VORT HRW 40 MONO EVO HCS WI-FI helps improve indoor air quality, reducing the problem of stuffiness, excess moisture and the risk of mold formation. The device works alternately, removing stale air from the interior and blowing in fresh air from the outside. Thanks to the ceramic heat exchanger, energy from the exhaust air is recovered and transferred to the supply air, which helps reduce heat loss during the heating season.

Advantages Vortice VORT HRW 40 MONO EVO HCS WI-FI

Decentralized ventilation with heat recovery

Vortice VORT HRW 40 MONO EVO HCS WI-FI model is equipped with a ceramic heat exchanger with hexagonal cells. This design allows for efficient recovery of thermal energy and stable operation in everyday use. The maximum heat recovery efficiency is up to 90%, thanks to which the recuperator supports the thermal comfort of the room and limits the cooling of the interior during ventilation.

The device is designed for single rooms, so it can be used as a stand-alone wall heat recovery unit or as part of a larger decentralized ventilation system. Vortice VORT HRW 40 MONO EVO HCS WI-FI is particularly practical in modernized buildings where the installation of central heat recovery is difficult or too expensive. Installation through an external wall allows for air exchange without running ventilation ducts throughout the building.

Wi-Fi and multi-device collaboration

Vortice VORT HRW 40 MONO EVO HCS WI-FI version is equipped with a Wi-Fi module that enables communication between installed devices. Thanks to the local mesh network, recuperators can work in a coordinated manner, which helps maintain the correct air balance in the rooms. This is particularly useful when several decentralized units are installed in a building.

Wi-Fi connectivity increases the functionality of the system and allows for better adaptation of the devices to the actual needs of users. Vortice VORT HRW 40 MONO EVO HCS WI-FI can be part of a system in which several recuperators work together, alternately providing supply and exhaust air. This solution improves ventilation comfort and makes it easier to maintain stable air exchange throughout the apartment or premises.

HCS humidity sensor and automatic operation

Vortice VORT HRW 40 MONO EVO HCS WI-FI model has an integrated relative humidity probe. This allows the device to automatically respond to increases in humidity in the room and increase ventilation intensity. The user can select the humidity threshold that activates Boost mode from three levels: 50%, 65% or 80%.

The HCS function is particularly useful in rooms where higher humidity levels occur periodically, such as bedrooms, living rooms, offices, kitchenettes or utility rooms. Automatic adjustment to humidity levels helps reduce condensation and improves breathing comfort without having to manually change settings.

Five operating modes and five fan speeds

Vortice VORT HRW 40 MONO EVO HCS WI-FI offers five fan speeds. The lowest night mode provides a flow of 15 m³/h, while Boost mode reaches 40 m³/h. This allows the device to be adapted to various situations: quiet nighttime operation, daily ventilation, more intensive air exchange, or rapid moisture removal.

The recuperator supports five operating modes: continuous ventilation with heat recovery, air extraction only, air supply only, automatic mode and night mode. In heat recovery mode, the device periodically removes and blows air, using the energy stored in the ceramic exchanger. In automatic mode, operation depends on the readings of the humidity sensor, and night mode reduces the intensity of operation when the light level in the room drops.

EC motor, quiet operation and low energy consumption

Vortice VORT HRW 40 MONO EVO HCS WI-FI uses a highly efficient EC motor that ensures low energy consumption and smooth operation regulation. The maximum power consumption is 6 W, so the device can operate regularly without a significant impact on operating costs. The EC motor allows you to combine effective ventilation with quiet operation and energy efficiency.

The sound pressure level at 3 m ranges from 19 dB(A) in Night mode to 31.8 dB(A) in Boost mode. This makes the recuperator suitable for rooms where acoustic comfort is important. At lower speeds, the device can operate very discreetly and, if necessary, increase airflow without the need for a larger duct system.

Filtration and practical wall construction

Vortice VORT HRW 40 MONO EVO HCS WI-FI recuperator is equipped with two filters: an ISOCoarse 65% filter and a pre-filter for dust retention. The filters are easily removable and washable, making it easier to keep the device in good technical condition. Filter status information can be displayed to the user, helping to maintain proper ventilation performance and filtration efficiency.

The device housing is made of impact- and UV-resistant plastic resin. Vortice VORT HRW 40 MONO EVO HCS WI-FI has an integrated mechanical quick air flow closing system, an external rubber grille and an anti-insect net mounted in the duct on the room side. The nominal diameter is 160 mm and the mounting diameter is 146 mm.

Technical data

• Brand and model: Vortice VORT HRW 40 MONO EVO HCS WI-FI
• Product code: 12444
• Device type: decentralized wall heat recovery unit with heat recovery
• Mounting type: wall-mounted, through an external wall
• Exchanger type: ceramic heat exchanger with hexagonal cells
• Maximum heat recovery efficiency: up to 90%
• Wi-Fi module: yes, communication between devices in the local mesh network
• HCS Humidity Sensor: Yes, integrated relative humidity sensor
• Boost mode humidity thresholds: 50%, 65% or 80%
• Engine type: EC
• Number of fan speeds: 5
• Operating modes: continuous ventilation with heat recovery, exhaust only, supply only, automatic mode, night mode
• Control: One-way communication remote control
• Filter indication: yes, possibility to check the filter status
• Filter class: ISOCoarse 65%
• Pre-filter: yes, to trap dust
• Air flow in night mode: 15 m³/h
• Airflow in Quiet mode: 22 m³/h
• Air flow in Performance mode: 30 m³/h
• Airflow in High Performance mode: 38 m³/h
• Air flow in Boost mode: 40 m³/h
• Pressure in night mode: 17 Pa
• Pressure in Quiet mode: 24 Pa
• Pressure in Performance mode: 37 Pa
• Pressure in High Performance mode: 47 Pa
• Boost pressure: 47 Pa
• Sound power level in night mode: 36.5 dB(A)
• Sound power level in Quiet mode: 38.4 dB(A)
• Sound power level in Performance mode: 42.9 dB(A)
• Sound power level in High Performance mode: 48.1 dB(A)
• Sound power level in Boost mode: 49.3 dB(A)
• Sound pressure level at 3 m in night mode: 19.0 dB(A)
• Sound pressure level at 3 m in Quiet mode: 20.9 dB(A)
• Sound pressure level at 3 m in Performance mode: 25.4 dB(A)
• Sound pressure level at 3 m in High Performance mode: 30.6 dB(A)
• Sound pressure level at 3 m in Boost mode: 31.8 dB(A)
• Power supply voltage: 220–240 V
• Frequency: 50–60 Hz
• Maximum power consumption: 6 W
• Maximum current consumption: 0.05 A
• Insulation class: II
• Maximum ambient temperature for continuous operation: 50°C
• Nominal diameter: 160 mm
• Mounting diameter: 146 mm
• Dimensions A: 231 mm
• Dimensions B: 200 mm
• Dimensions C: 73 mm
• Dimensions D: 283 mm
• Weight: 3.30 kg
• Housing material: impact-resistant and UV-resistant plastic
• Airflow closure: integrated mechanical quick-closure system
• External grille: rubber, mounted from the outside or inside through a hole in the wall
• Insect net: yes, mounted in the channel on the room side
• Certificates: CE, UKCA
• Example accessories: C TEMP, C HCS, TUBO PVC D.160 L=700, KIT FTR D.127X10, MWS, RGR, WA, WSG-INOX, WSG-W, FTR ePM10 50% M5 d.155×40
• Application: flats, houses, apartments, offices, study rooms, commercial premises and rooms requiring decentralized ventilation with heat recovery

```

[1]: https://www. vortice . com/en/wet-and-dry-vacuum-cleaners/residencial-heat-recovery/wall-decentralized/12444 "VORT HRW 40 MONO EVO HCS WiFi - CMV AND HEAT RECOVERY RESIDENCIAL HEAT RECOVERY Vortice

"

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With a VAT invoice
Parametry	Brand	Vortice
Parametry	Kind	heat recovery ventilator
Parametry	Manufacturer code	12442
Parametry	Range of energy efficiency classes	A+ - G
Parametry	Energy efficiency class	A+
Parametry	Batteries included	yes