Septomatuvo lygio jutiklis, dviejų lygių, nauja versija

Trumpai apie prekę

Prekė: Septomatuvo lygio jutiklis, dviejų lygių, nauja versija. Kategorija: Jutikliai.

• Gamintojas: HDP Alert
• Modelis: GMS4

➡ We have been on the market for over 20 years

and thousands of customers have already trusted us

We deal with:

✅production of tank fill indicators since 2004.

Over 10000pcs installed sensors.

✅Delivery of unusual orders,

✅production universal, reliable and TESTED quick coupler for septic tanks, which we were the first to introduce to the market and developed a method of their production

❗We ensure trouble-free operation for many years ❗

The beacon also comes in a bright color

Variant available at the top of the listing.

➡ ALERT Septic Tank Indicator

New extended GMS4 model for measuring two levels!

✅ ALERT wired beacons have the ability to connect two probes "point" allowing for level signaling:

1. two upper warning ⚠ “Note” and “Alarm Max”, and so are configured for sale

2. one upper level "Alarm Max" and one lower level ⚠ "Note Minimum"

3. two lower levels ⚠ "Note Mini", and "Alarm Minimum"

‼ To make the beacon work in the second and third configurations of Max –Mini and Mini-Mini. Please indicate this in your order.

‼ the signaling device is sold with one probe. Possibility to buy an additional probe 1m or 2m.

The probes can be used in all tanks with conductive liquids. The alarms can also work with other sensors, e.g. floats, reed switches, etc. which expands the possibilities of their application.

Setting alarm levels occurs during the installation of probes.

When using one probe, the "Alarm" level should be set at the calculated height taking into account the time reserve "X". By using two probes, the Warning and Alarm levels can be monitored.

✅GMS4 beacon :

• Ease of installation
• Reliability
• Maintenance-free device, no maintenance required, battery replacement, etc.
• Clear panel – descriptions with pictograms
• Any distance of the tank from the place of installation of the signal panel
• Acoustic and light signalling
• Possibility to mute the sound (alarm) and turn it back on

✔ Installation in the tank is very simple and does not require entering into its interior.

The beacon can be installed in tanks already in operation.

Wired beacons are a complete lack of trouble after installation.

Assembly is extremely simple and requires only minimal technical knowledge.

There is no problem as in the case of wireless devices - no range when we put the transmitter under the iron cover and which results in the fact that each "wireless" transmitter must be placed outside the tank!

The durable stainless steel probe is the only one that has proven itself in harsh conditions for more than 10 years.

Many years of experience have allowed us to create a beacon from scratch - trustworthy customers.

❌No more looking into the septic tank, the beacon will make sure that the tank does not overflow.

If the tank fills up to the alarm level, the beacon will notify you with a light and sound signal that the tank is almost full. This is possible by placing the probe in the tank and the signaling panel in any room.

Setting the alarm level of switching on the signaling takes place during the installation of the probe

This level can be set freely at the user’s request, taking into account the time reserve „ X „days from signaling the alarm state to complete filling of the tank.

Green LED "OK. " on the panel informs that the device is in standby mode, and the level of wastewater in the tank has not reached the alarm level.

The ignition of the red flashing diode and the inclusion of an audible signal signals that the level of liquid in the tank has reached the alarm level. This is a signal that the export of liquid waste should be ordered within no longer than it was established at the time of installation.

The beep can be turned off with the push of a button, crossed out speaker.

The installation requires the connection of a probe mounted in the tank with a beacon panel located in any room.

The cable between the tank and the building due to different distances must be purchased independently.

We recommend any two-core cable with a cross-section of 2x0.5mm2 for earth conditions.

Assembly in the tank is very simple and does not require entering its interior, therefore the beacon can be installed

in tanks already in operation

Installation of the probe in the septic tank requires only:

• Drilling a hole in the side wall of the well (below the metal manhole cover)
• introduction through the drilled hole of the cable into its interior and connection of the probe
• placing the probe at the appropriate depth in the tank

Scheme for installation of the "ALERT" beacon

1. tank
2. shielding tube / peszel
3. probe
4. beacon panel
5. power supply
6. 230V socket
7. sewerage
8. well of circles /chimney
9. cover

After performing these steps, all that remains is to connect the signal cable coming from the tank to the cable at the panel and insert the power supply plug into the outlet. We do this with a two-core cable of any cross-section, e.g. 2x0.5, preferably for ground conditions.

The probe placed in the tank thanks to the use of appropriate materials and solutions is resistant to aggressive chemical environment and mechanical damage, which makes it practically trouble-free.

Detailed installation information can be found in the accompanying instructions.

✅Each set includes:

• Signalling panel
• power supply
• probe with a cable length of 1m (possibility of buying an additional probe 1m or 2m )
• instruction manual and assembly

➡ We also offer a signal with SMS notification

ALLERT GSM IIIT4

Indicator and septic tank connections available at our other auctions. Welcome!

⭐ Treat yourself to a little luxury and take care of your comfort,

install the Septic tank filling beacon in your tank ⭐

Specifications