Sieninis rekuperatorius Harmann AIRDOT 160 Easy Pilot su garso slopintuvu

Trumpai apie prekę

Prekė: Sieninis rekuperatorius Harmann AIRDOT 160 Easy Pilot su garso slopintuvu. Kategorija: Rekuperacinės vėdinimo sistemos.

• Gamintojas: Harmann
• Modelis: AIRDOT EASY

• High quality workmanship
• Silent operation from 16 dB(A)
• Heat recovery efficiency up to 93 %
• Ceramic exchanger
• Three-speed operation (20/40/60 m3/h)
• Turning on/off the device and changing gears possible with the remote control
• The remote control is included

• Model: AIRDOT Easy
• Air flow max: 60 m3/h
• Power max. 7 IN
• Voltage: 50Hz
• Power supply: 220-240Vac
• Temp. Environment: -30 +50˚C
• Degree of protection: IPX4
• Weight: 4,9 kg
• Producer: HARMANN

The HARMANN AIRDOT wall recuperator is a modern wall recuperator with a specially designed reverse fan, whose task is to exchange air indoors. The device provides fresh air to the rooms. The recuperator works cyclically, first pulling used, dirty and heated air out of the room, and then supplying clean, fresh heated in a ceramic exchanger.

The absence of negative impact on human health and the environment is confirmed by the PZH certificate.

Versions of devices

In the basic version, AIRDOT Easy can work as a single device - but if greater efficiency is required, it is worth planning the installation of two units.

In AIRDOT Link or wireless AIRDOT Link+, devices communicate with each other by synchronizing their work (wired or wireless communication, depending on the version).

For AIRDOT Link and AIRDOT Link+ versions, you must purchase an LCD remote control. One remote control can operate several recuperators. Provides access to all advanced features of the device.

The list of UTIs is an aid for applicants of the Clean Air Programme in the selection of equipment and materials eligible for funding

The HARMANN AIRDOT recuperator uses a high-efficiency EC motor with ball bearings for very low energy consumption, only 7W and a long service life.

Unlike competing models, the engine in the recuperator is located in the middle of the partition ensuring maximum comfort and silence with high efficiency.

In addition, the device uses an external intake that optimizes air flow and reduces noise

The recuperator is equipped with the longest monolithic ceramic honeycomb heat exchanger, ensuring heat recovery efficiency of up to 92%!

The recuperator uses a washable anti-plate filter made of high-quality polyurethane plastic. AIRDOT will remind you to clean it.

- Extended to 150mm ceramic exchanger accumulates and recovers more heat up to 93%

- High-performance EC motor with ball bearings guarantees low power consumption and long service life.

- Mute reverse fan located behind the exchanger, inside the wall.

- Tilting panel with the function of cutting off the cold air supply when the device is not working.

- Made from premium ABS material for durability and a sleek design.

- Washable dust filters make operating costs easier and less expensive.

- The standard channel allows you to mount the device in a partition with a thickness of 250-500mm.

- IPX4 rating protects the device from weather phenomena.

- Installation with a drop "outside" eliminates the need to drain the condensate into the sewage system.

CYCLE 1 Extract of warm, used air. Heat accumulation in the exchanger

CYCLE 2 Breath of fresh air. Reception of accumulated heat

Specification of the device in the basic version AIRDOT Easy ( model offered at the above auction )

• Switch and gear switch on housing (two speeds)
• Diode indicating the operation of the device

Specification of the device in the version with wired communication AIRDOT Link (model available at our other auctions )

• Switch on the housing (possible remote control)
• Standby function (sleep mode)
• Hygrostat function
• Diode indicating the operation of the device and the need to clean the filter
• Four speed feet available, remote controlled
• Up to 16 devices can be communicated via cable connection

Specification of the device in the version with wireless communication AIRDOT Link+ (model available at our other auctions )

• Switch on the housing (possible remote control)
• Standby function (sleep mode)
• Hygrostat function
• Diode indicating the operation of the device and the need to clean the filter
• Four degrees of speed, controlled by remote control
• Up to 16 devices can be configured via wireless communication

Specifications