Sieninis rekuperatorius VENTO Expert A50-1 S10 W V.2

Trumpai apie prekę

Prekė: Sieninis rekuperatorius VENTO Expert A50-1 S10 W V.2. Kategorija: Rekuperacinės vėdinimo sistemos.

• Gamintojas: Blauberg
• Modelis: VENTO Expert A50-1 S10 W V.2

Vento Expert A50-1 S10 W V.2 delivers fresh and clean air to the room 24 hours a day. The lack of the need to run a network of channels in a decentralized system makes the device easy to install and does not generate high operating costs. A dedicated mobile application allows you to control from anywhere in the world.

Technical data:

• Voltage: 1~230 V
• Power: 4,45-7,06 W
• Power consumption: 0,035 - 0,059 A
• Efficiency in weathering mode: up to 50 m3/h
• Efficiency in heat recovery mode: up to 25 m3/h
• Noise level: up to 21 dB(A)
• Temperature of transported air: from -20°C to +40°C
• Heat recovery efficiency: up to 93%
• Energy efficiency class: A
• Safety Class: IP24

INSTALLATION

The device is designed for in-wall installation, in a through hole made in the external wall of the building.

The most efficient and sustainable use is achieved using a pair of synchronized units, operating in alternating mode. While one of the recuperators operates in exhaust mode, the other blows air into the interior of the building for better air circulation.

During the construction of new buildings, the installation of equipment is carried out in two stages:

• pre-assembly: when making internal and external facades
• final assembly: before putting into use - installation of a container with an exchanger, fan and filters, installation and connection of an internal block with control and blinds.

CONTROL

• Control the operation of the device using a mobile application for a smartphone or tablet.
• Synchronized operation of devices, thanks to Wi-Fi connection.
• Control your ventilation system with a cloud service from anywhere in the world.
• Possibility to connect to the intelligent building system or to the building management system (BMS) via Wi-Fi.
• Control the operation of the device using touch buttons on the panel housing or remote control.

The VENTO Expert A50-1 S10 W V.2 can operate as an independent ventilation unit or can be connected to other units and controlled by a Master unit. In this case, only one unit receives a signal from the remote control.

PRINCIPLE OF OPERATION

Polluted, warm air removed from the room to the street passes through the heat exchanger, gradually heating it up and giving away some of the moisture. After the ceramic exchanger heats up, the device automatically switches to air intake mode. Fresh, cool air from the outside flows through the heat exchanger, absorbing the heat and moisture accumulated in it. After 70 seconds, the heat exchanger cools down, the device switches to mode I - internal air exhaust.

ADVANTAGES:

• Modern - decentralized unit with wireless control.
• Energy-efficient - energy class A+ is a guarantee of environmental protection and reduction of costs.
• A compact internal module consisting of a fan, heat exchanger and filters with a high filtration class will ensure clean and fresh air. The built-in humidity sensor allows for automatic control of the air quality in the room.
• Attractive design.
• Installation in the wall in a prepared hole with a diameter of 180 mm.
• Remotely connect all units into a network without the need for wiring.
• Eliminate drafts with throttles when the fan is off.
• Ventilation of rooms with an area of about 25 m2 .
• High efficiency - 93%.
• Possibility to connect an external CO2 relay or other external sensors.
• The noise level is comparable to a whisper (11-21 dBA).
• Easy installation and maintenance.

Can be installed in a wall with a thickness of 250-500 mm.

Specifications