Signalizacijos komplektas SATEL PERFECTA 64 M 2G/4G LTE su INT-TSH210-W

Trumpai apie prekę

Prekė: Signalizacijos komplektas SATEL PERFECTA 64 M 2G/4G LTE su INT-TSH210-W. Kategorija: Išoriniai moduliai.

• Gamintojas: Satel
• Modelis: [11Bw] PERFECTA 64 M 2G/4G LTE + INT-TSH210-W

The auction concerns:

Complete [11Bw] : PERFECTA 64 M SET-A

1. Perfecta 64 M control panel + antenna ANT-LTE-I

2. SLIM-PIR detector - 6 pieces

3. INT-TSH210-W - keypad - touch screen 10" - colour WHITE.

4. OPU-4 P - plastic housing

5. SP-4001 R - external sounder acoustic-optical

6. AWT-150 transformer 40VA 230/16/18VAC

7. 12V/7,2Ah or 7Ah battery

This is important information...

** NOTE - ONLY ONE of the following devices can be connected:

controller ACU-220 / ACU-280 (ABAX system - 868 MHz)

or PERFECTA-RF module ( MICRA system - 434 MHz)

or the INT-RX-S pilot expander.

CANNOT be used in the system SIMULTANEOUSLY wireless devices ABAX 2 and MICRA

1. PERFECTA 64 M - control panel.

It is designed to secure objects such as apartments, single-family houses, segments in terraced houses, offices, etc. Provides protection in accordance with the requirements of Grade 2 EN 50131. The control panel is characterized by simple configuration and easy and intuitive operation using manipulators, including models with touch screens. The alarm system functions can also be controlled remotely using the PERFECTA CONTROL mobile app and remote controls.

The PERFECTA 64 M control panel allows you to create a wired or wireless installation - you can connect one of the controllers of the ABAX 2 system (ACU-220 or ACU-280 operating in the 868 MHz frequency band) or PERFECTA-RF, i.e. MICRA wireless system module (433 MHz frequency band). Alternatively, the INT-RX-S remote control module can be connected to the control panel.

The PERFECTA 64 M control panel uses an LTE module operating in 2G and 4G LTE mobile networks.

It enables cooperation with a mobile application with PUSH message support, remote system configuration using PERFECTA Soft, event monitoring (e.g. to the monitoring station of the security agency), voice notification, SMS control and audio verification (listening to sounds from the protected facility). It supports two nano-SIM cards, which ensures continuity of communication: in the absence of connectivity to the network of the first operator, the second card is automatically selected.

The control panel electronics board is equipped with 8 inputs and 4 wired outputs. Their number can be increased by connecting expansion modules: INT-E input expanders and INT-O or INT-ORS outputs. This allows you to expand the system by attaching more detectors, beacons and even actuators (to control the garage door, blinds, garden sprinklers). The INT-CR zone control module can also be connected to the control panel. Thanks to it, proximity cards and keychains can be used to control selected functions of the system.

The system based on the PERFECTA 64 M control panel can be divided into four zones, with a choice of three standby modes (day, night, full). Zones can be independent of each other or contain common parts (indicated entrances).

Configuration of the system can be done in two ways: from a computer with PERFECTA Soft installed (locally - connection via RS-232 port (TTL), remotely - via data transmission in the mobile network*) and with the help of a keypad.

• Compliance with EN 50131 Grade 2

Division of the system into 4 zones - 3 surveillance modes in each zone

• possibility of assigning the entrance to 1~4 zones
• control by the user or by timers
• 8 wired programmable inputs on the control panel:

  - configuration selection: NO, NC, EOL, 2EOL/NO, 2EOL/NC

  - possibility of operating roller shutter and shock detectors

• up to 64 programmable inputs
• 4 programmable wired outputs on the control panel:

  - 2 high current outputs (power supply) 1000mA

  - 2 low current outputs type OC - max. 25mA

• KPD output - max. 500mA
• AUX output - max. 500mA
• maximum 64 programmable outputs (including 4 outputs dedicated to MICRA system beacons)

Embedded modules:

- 2G/4G LTE mobile communicator with 2 nano-SIM sockets (SMS, monitoring to the station, mobile application, PUSH notifications)

- voice (playing voice messages for telephone notification) acoustic alarm verification (listening to sounds)

Communication bus for connection:

• INT-TSH2, INT-TSG2, INT-KSG2R, PRF-LCD
• INT-E, INT-O, INT-ORS expansion modules
• ABAX 2 wireless controllers: ACU-220 or ACU-280**
• INT-RX-S remote control expander**
• INT-CR zone control modules
• communication connector for connection - MICRA PERFECTA-RF** wireless system module

Maximum number of wireless devices supported:

- ABAX 2: system for up to 4 keypads / up to 48 detectors, beacons or other devices

- MICRA system: up to 4 manipulators / up to 64 detectors / up to 4 beacons

Cooperation with wireless manipulators:

PRF-LCD-A2 - in ABAX 2 system

PRF-LCD-WRL - in MICRA system

Control the system with:

• manipulators
• PERFECTA CONTROL mobile application
• remote controls
• proximity cards and keychains

Passwords: 62 user passwords and 1 service password

• editing of names (users, zones, inputs, outputs and modules) facilitating system control and supervision
• 8 timers with the ability to set exceptions
• 8 thermostats
• memory of 3584 events
• automatic diagnostics of basic system components
• built-in switching power supply:

  - overload protection

  - protection against complete battery discharge

  - battery charging current adjustment

  Programming of control panel settings:

  - locally - manipulator or computer with PERFECTA Soft installed,connected to RS 232 (TTL) port of the control panel

  - remotely -computer with PERFECTA Soft installed,connecting to the headquarters using data transmission in the mobile network*

* support for data transmission in LTE/EDGE/GPRS technology - depending on the capabilities of the mobile network

Ability to update software (firmware) locally or remotely

2. SLIM-PIR - SATEL - without handle Bracket D.

DIGITAL PIR internal motion detector.

The sleek, slim housing is made of high-quality plastic. The uniform appearance of all detectors makes it difficult for the intruder to identify a specific model operating in the system and unifies the appearance of all detectors mounted in the facility.

The device can be mounted on the BRACKET D adjustable ceiling-wall bracket, which is available in the adjacent auction.

Reliable motion detection - UNIQUE lens.

Each detector has a modern lens designed and manufactured in Japan - especially for the company SATEL.

Modern detection algorithm - many years of experience in the production of motion detectors and the use of the latest technologies have enabled the development of an advanced next-generation motion detection algorithm. Thanks to it, SLIM LINE detectors provide reliable detection of intruders within the entire supervised area, without triggering unwanted alarms.

Digital temperature compensation - SLIM LINE detectors dynamically adjust the motion detection algorithm to changes in ambient temperature, so that these changes do not affect the effectiveness of detectors.

Quick lens replacement - the ability to easily replace the complete front with the lens makes SLIM LINE* detectors can be quickly and conveniently adapted to the requirements of the object, e.g. the shape of the protected area. Wide-angle (WD) lenses are installed as standard - in addition to them, curtain (CT) and long-range (LR) lenses are also available. --- * except PET detectors

Characteristics :

• Compliance with the requirements of EN 50131 for Grade 2
• motion detection with passive infrared sensor (PIR)
• adjustable detection sensitivity
• digital motion detection algorithm
• digital temperature compensation
• wide-angle lens designed specifically for SLIM LINE detectors
• possibility of replacing the lens with a curtain (CT-CL2) or long-range (LR-CL2)
• built-in parametric resistors (2EOL: 2 x 1,1 kΩ)
• LED indicator for signalling
• LED indicator light color selection (4 colors available)
• remote switching on/off of the LED indicator
• supervision of motion detection system and supply voltage
• tamper protection against opening the housing

TECHNICAL DATA

• Supply voltage (±15%) 12 V DC
• Detectable movement speed 0,3...3 m/s
• Operating temperature range -10°C...+55°C
• Recommended mounting height 2,4 m
• Current consumption at standby 8 mA
• Maximum current consumption 23 mA
• Weight 100 g
• Maximum humidity 93±3%
• Dimensions 62 x 137 x 42 mm
• Environmental class according to EN50130-5 II
• Alarm signaling time 2 s
• Compliant with EN 50131-1, EN 50131-2-2, EN 50130-4, EN 50130-5
• Parametric resistors 2 x 1,1 kΩ
• Start-up time 30 s
• Degree of protection according to EN50131-2-2 Grade 2
• Detection area 15 m x 20 m, 90°
• Alarm outputs (NC relay, resistive load) 40 mA / 24 V DC
• Tamper outputs (NC) 100 mA / 30 V DC

3. INT-TSH210-W - keypad - touch screen 10" - colour WHITE.

Characteristics:

INT-TSH210 is an advanced alarm system keypad equipped with a 10 inch high resolution touch screen.

The INT-TSH210 display is made in TFT technology, which ensures high image quality, vivid colors and fast response time to touch.

INT-TSH210 provides intuitive operation of systems based on series control panels

INTEGRA, INTEGRA Plus, VERSA and PERFECTA 64M.

The INT-TSH210 enables users to quickly access safety control or building automation control, including KNX* devices. Integra and Integra PLUS.

Thanks to a modern graphical interface, personalized screens and the ability to build your own menu, the INT-TSH210 provides convenience of use and offers a wide range of configuration options according to the needs of each system.

*only applicable to INTEGRA and INTEGRA Plus

Features:

• supported by control panels:

  From the INTEGRA series and INTEGERA Plus (software version 1.21 or later)

  From the VERSA series (software version 1.06 or later)

  PERFECTA 64 M

• touch screen:
• dimensions of the housing width. 251 x H 157 x D 18 mm
• slim housing with a depth of 18 mm
• diagonal: 10”
• TFT display
• resolution: 1024 x 600
• colour depth: 16,7 million
• gesture handling
• Configurable user screens (max. 24 screens)
• more than 20 ready-made graphic motifs with the possibility of creating your own composition
• operation of alarm system and automation using widgets
• controlling the system using macro commands simplifying the start of alarm functions and building automation
• ability to quickly trigger alarms ATTACK, FIRE, HELP
• indicators of the current state of the system placed in the status bar
• the ability to display visualizations of a protected object
• Intuitive user menu with icons
• Customizable screensaver
• possibility of displaying a slideshow (photo frame function)
• the ability to adjust the backlight of the screen divided into day and night mode
• built-in microSD memory card reader (storage of photos to the photo frame, background of additional screens)
• Built-in speaker for sound signaling with volume control
• possibility of mounting to the wall using a handle (included) or to an electrical installation box
• 2 programmable wired inputs (supported only by INTEGRA series control panels):

  support for NO and NC detectors and roller shutter and shock detectors

  support for EOL, 2EOL and 3EOL* configurations (3EOL only by INTEGRA Plus series control panels)

  programmable value of parametric resistors

• Tamper protection against removal from the handle and detachment from the ground
• Available in white (INT-TSH210-W) and black (INT-TSH210-B)

Technical data:

• Power supply voltage (±15%): 12 V DC
• Housing dimensions: 251 x 157 x 18 mm
• Working temperature range: -10°C...+55°C
• Power consumption on standby: 300 mA
• Maximum current consumption: 415 mA
• Mass: 604 g
• Maximum humidity: 93±3%
• Environmental class according to EN50130-5: II
• Supported memory cards: microSD, micro SDHC

4. OPU-4 P plastic housing - Satel.

SURFACE MOUNTED.

Note!!! - the presented equipment inside the housing is illustrative.

Universal plastic housing made of polystyrene (plastic with flame retardant) with space for TR40VA or TR60VA and battery 7,2Ah/12V and additional accessories.

DESCRIPTION

Universal enclosures from the OPU-4 series are dedicated to devices manufactured by SATEL.

They are made of polystyrene in white.

They can be installed in enclosed spaces.

The OPU-4 P housing is designed for surface mounting, and the OPU-4 PW for plug-in mounting.

The housing is equipped with a holder designed for GSM antenna and has two tamper contacts reacting to the opening of the lid

and detachment from the ground.

Included with the housing – in addition to tamper contacts – there are dowels, spacers, two wires for connecting the transformer and additional screws.

Properties :

• Double tamper protection
• Possibility of installing wireless devices with antennas inside the enclosure
• Dimensions: 266 x 286 x 100 mm
• Weight: 0,92 kg
• Possibility of mounting the APS-412 power supply in place of the transformer

Application:

• alarm control panels manufactured by SATEL
• expansion modules manufactured by SATEL
• GSM communication modules manufactured by SATEL

5. SP-4001 R - External optical-acoustic beacon

SP-4001 R is an optical-acoustic beacon designed for outdoor installation, equipped with super-bright LEDs and a piezoelectric transducer. One of three types of modulated sound signalling with an intensity of 120 dB is available to choose from. The housing of the beacon is made of polycarbonate, which ensures high mechanical strength and aesthetic appearance of the device, which remains unchanged despite the passage of years. The simple yet attractive design of the housing is ideal even on a modern facade. The device is equipped with tamper protection against opening the housing or detaching from the wall, and the internal galvanized sheet cover provides additional protection of the electronics board and the transducer against mechanical damage. Thanks to proper impregnation, the electronics system is also resistant to harsh environmental conditions.

• acoustic signalling: piezoelectric transducer
• Optical signaling: super-bright LEDs
• inner metal cover
• anti-sabotage protection against:
• detachment from the ground
• opening

Technical data:

• Environmental class III
• Housing dimensions 148 x 254 x 64 mm
• Operating temperature range -35...+55 °C
• Rated supply voltage (±15%) 12 V DC
• Maximum current consumption 270 mA
• Weight 805 g
• Sound intensity 120 dB

6. AWT-150 transformer 40VA 230/16/18VAC

7. 12V/7,2Ah or 7Ah battery

Note!!! - the battery is intentionally not presented LOGO - the reason is a very high rotation of battery models - dot. their production and new supplies.

Most often these are batteries of the MW Power brand - series: MWS ; MW ; MWL ; MWP or IPS brand

ALL models of control panels and products of the SATEL brand are in adjacent auctions.

Specifications