Šildytuvas su ventiliatoriumi 2000W, nuotolinis valdymas, KRAFT&DELE KD11788

Trumpai apie prekę

Prekė: Šildytuvas su ventiliatoriumi 2000W, nuotolinis valdymas, KRAFT&DELE KD11788. Kategorija: Elektriniai šildytuvai.

• Gamintojas: no brand
• Modelis: KD11788

Slim column fan with ceramic heating element PTC, designed for heating home and office rooms. It allows you to adjust the temperature, oscillate the air and program the work – all from the remote control.

Maximum power 2000 W Temperature range 15 – 40°C Noise level 36 – 39 dB Oscillation 90°

Characteristics of the device

Ceramic PTC Heating Element

PTC (Positive Temperature Coefficient) elements are characterized by self-regulation – as the temperature increases, their resistance increases, which reduces power consumption and eliminates the risk of overheating. In practice, this means more stable operation and longer service life compared to classic wire heaters.

Two power levels and fan mode

The device works in three modes: self-inflating (without heating), heating 1000 W and heating 2000 W. The 1000 W mode works well while maintaining the temperature in an already heated room, the 2000 W mode – with rapid heating from a cold start. Fan mode allows air to circulate without heating.

Thermostat and timer

The built-in thermostat allows you to set the target temperature between 15 and 40°C. Once it is reached, the device automatically goes into standby mode and resumes operation when the temperature drops. The timer allows you to schedule a shutdown for up to 12 hours, reducing energy consumption during absence or sleep.

90° oscillation and 50 m³/h capacity

Automatic oscillation in the 90° range distributes heated air in most of the room, reducing temperature differences between zones. The capacity of 50 m³/h allows for effective circulation in rooms with an area of up to about 15 to 20 m².

Security safeguards

The device has thermal protection against overheating and a safety switch activated when tipping over. Both mechanisms operate independently and automatically cut off the power supply before damage to the device or fire hazard occurs.

Touch operation and remote control

Touch panel with LED display allows direct adjustment of parameters. The included remote control allows you to change the mode, temperature and timer without getting up – especially useful for night use or when the device is standing in a hard-to-reach place.

Technical specification

ModelKD11788 ManufacturerKRAFT&DELE Power supply220 – 240 V,50/60 Hz Maximum power2000 W Minimum power1000 W Operating modesFan /low heating (1000 W) / high heating (2000 W) Heating elementCeramic PTC Temperature range15 – 40°C Oscillation90° Efficiency50 m³/h Noise level36 – 39 dB Time programmerUp to 12 hours Touch control panel with LED display Remote control Yes,included Overheating protectionYes Overturn switchYes Cord length1,5 m Dimensions (W x S x G)65,5 x 23,5 x 19 cm Weight2,4 kg ColourWhite-black

Application

• Heating of a bedroom, living room or children's room as a complement to central heating
• Fast heating of office rooms in the morning
• Heating the bathroom or dressing room during transitional periods
• Use in rooms where central heating installation is unavailable or insufficient
• Night operation with timer – the device turns off automatically after the set time
• Heating your home office or study without having to run the entire heating system
• Use as a temporary heat source during a failure or repair of a heating system

Noise level 36 to 39 dB – what does this mean in practice?

A value of 36 to 39 dB corresponds to the volume of a quiet whisper or a quiet library. In night mode, the device does not interfere with sleep — for comparison, a standard desk fan typically generates 45 to 55 dB. The low noise level is the result of the use of a ceramic heating element, which does not require such intensive blowing as traditional wire heaters.

Use and maintenance

The fan should be placed on a stable, flat ground, with at least 50 cm distance from walls, furniture and curtains. Air inlet and outlet grilles should remain uncovered during operation. The device is not suitable for use in rooms with increased humidity (bathrooms, saunas) – in such conditions, equipment with an appropriate IP protection class is required.

Maintenance is limited to regular cleaning of ventilation grilles from dust – preferably with a soft brush or compressed air, with the power supply disconnected. The accumulated dust on the heating element can cause an unpleasant odor at first start-up after a long break.

A 1,5 m long power cord may require the use of an extension cord for some setting configurations — use extension cords adapted to a power consumption of at least 2000 W (10 A).

Related products

The device fits akcesoria such as extension cords with grounding (min. 10 A / 2500 W), power strips with surge protection and energy consumption meters for monitoring operating costs.

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With VAT invoice
Parametry	Brand	no brand
Parametry	Dominant color	black
Parametry	Model	KD11788
Parametry	Kind	ceramic
Parametry	Maximum power	2000 W
Parametry	Functions	fan
Parametry	Product height	65.5 cm
Parametry	Product depth	23.5 cm
Parametry	Product weight	2.23 kg
Parametry	Product weight with unit packaging	2.23 kg
Parametry	Manufacturer code	KD11788
Parametry	EAN (GTIN)	5903957020990