Smūginis griovimo plaktukas 2000W, 50J, HEX 30 mm, su lagaminu

Trumpai apie prekę

Prekė: Smūginis griovimo plaktukas 2000W, 50J, HEX 30 mm, su lagaminu. Kategorija: Griovimo plaktukai.

• Gamintojas: Eurotec
• Modelis: WIMA K.D.H-2000/JH-65A
• Galia: 2000 W

DEMOLITION HAMMER 2000W | 50J | HEX 30 mm | SET + OIL + CHISELS + SUITCASE

There is no room for compromise when you need to forge, demolish and remove concrete

Looking for a demolition hammer that can handle the toughest tasks? This model was created for heavy renovation, construction and demolition works. Thanks to the powerful impact energy of 50 J and the powerful 2000 W motor, it easily crushes concrete, brick, stone, screeds, floors or foundations.

This equipment is for people who expect efficiency, reliability and comfort even during long hours of use.

Why choose this hammer?

✅ Enormous stroke strength – up to 50 J

A strong stroke allows you to quickly and effectively break down even very hard materials. Less effort, shorter working time and greater efficiency on any construction site.

✅ 2000 W engine

High power ensures stable operation under load and adequate energy supply during the most demanding tasks.

✅ 1000 beats per minute

The optimal frequency of stroke allows you to efficiently perform demolition work without losing effectiveness.

✅ Professional HEX handle 30 mm

The HEX 30 mm clamping system is a solution used in heavy demolition hammers. Provides:

• maximum transmission of stroke energy,
• very high strength,
• secure fastening of the chisel,
• resistance to overload during intensive work,
• the possibility of using a wide range of HEX 30 mm chisels and accessories.

This is a standard created for professional demolition work, where ordinary handles can not cope.

Adjustable 360° handle – full control in any position

Working on the floor, wall or in a hard-to-reach place requires a proper grip.

The hammer is equipped with an adjustable handle rotated 360°, so you can position it exactly as you need it.

Adjustable handle advantages:

✔ more comfortable working from different angles

✔ better control over the tool

✔ greater safety of use

✔ less fatigue during long work

✔ quick adjustment in a few simple steps

1 ✋ Ergonomic handle

2 🔄 360° adjustment

3 📦 Starter Kit

4 🛡 Secure grip

5 💪 Convenience of work

6 🔒 Stable lock

7 ⚙ Robust construction

8 🔄 Full adjustment:

9 📏 670 mm

10 ↕ 255 mm

11 ↔ 125 mm

12 ⚡ 2000 IN

13 🔨 50 U

14 🚀 1400/min

15 ⬢ HEX 30 mm

16 ⚖ 14 kg

Built for the toughest jobs

This hammer is perfect for:

🔨 demolition of walls and walls

🔨 forging ceramic tiles

🔨 breaking concrete floors

🔨 removal of screeds

🔨 forging foundations

🔨 road and paver works

🔨 removal of old concrete stairs

🔨 renovation and construction works

HEX system 30 mm

• 🔨 Professional chisels
• 🔒 Secure attachment
• ⚙ High durability
• 💪 Maximum energy transfer
• 🏗 For heavy duty work

• ⚡ 2000W of power
• 🔨 50J of stroke energy
• 🔄 360° handle

Working comfort that makes a difference

The hammer weighs about 14 kg, thanks to which its weight supports the forging process and increases the efficiency of work.

The ergonomic main handle and additional handle allow you to confidently drive the device even during heavy use.

Solid construction has been prepared for work in demanding construction conditions.

Rich set ready to work

By purchasing this hammer, you get a set of necessary accessories:

✔ demolition hammer 2000W

✔ chisel HEX 30 mm

✔ HEX 30 mm flat chisel

✔ bottle of lubricating oil

✔ work gloves

✔ safety glasses

✔ dust mask

✔ service keys

✔ instruction manual

✔ solid transport case on wheels

Ready for tough challenges

Comes with a hammer oil. Before starting work, unscrew the screw, as in the photo, pour the oil that is included. Turn off the screw and you're done. You can immediately take on even the toughest challenges. For this device, hard work is not terrible.

Large transport case

The set includes a durable carrying case made of durable plastic.

Facilitates:

✔ storage of the device

✔ transport to construction site

✔ organization of accessories

✔ protection of equipment against damage

Thanks to the mounted wheels, transporting a heavy hammer is much more convenient.

Technical Specifications

Motor Power: 2000 W

Impact Energy: 50 J

Impact Frequency: 1000 blows/min

Chuck Type: HEX 30 mm

Handle Adjustment: 360°

Weight: approx. 14 kg

Device Length: 670 mm

Height: 255 mm

Width: 125 mm

Power Supply: 230V / 50Hz

Don't waste time on weak tools that tire the operator and can't handle hard concrete. This demolition hammer combines high 2000W power, 50J impact energy, and a professional 30mm HEX chuck, allowing you to perform heavy-duty tasks faster, more comfortably, and more effectively.

Choose equipment that actually demolishes – not just promises. 🔨💪

Demolition Hammer 2000W | 50J | HEX 30 mm | Case | Chisels | Oil | 360° Handle – Ready to Work

✅Not just numbers on paper – the power you see on construction site

This model is equipped with a powerful 2000W motor and 50J impact energy, thanks to which it can easily cope with concrete, foundations, floors or walls.

The high weight of the device, the professional HEX 30 mm handle and the high energy of a single impact make each stroke transfer maximum energy directly to the material being processed.

The effect? Faster work, more efficiency and less wasted time on construction sites.

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With VAT invoice
Parametry	Brand	Eurotec
Parametry	Power	2000 W
Parametry	Type of handle	HEX 30
Parametry	Impact energy	50 J
Parametry	Device weight	14 kg
Parametry	Product weight with unit packaging	17.5 kg
Parametry	Manufacturer code	WIMA K.D.H-2000/JH-65A
Parametry	EAN (GTIN)	5906857555081
Parametry	Batteries included	no
Parametry	Packaging status	original
Parametry	Certificates of conformity	CE