Sodo lapų pūstuvas ir smulkintuvas


Kaina:
Akcijos kaina€129,33
Sandėlys:
Yra sandėlyje

Aprašymas

Trumpai apie prekę

Prekė: Sodo lapų pūstuvas ir smulkintuvas. Kategorija: Dulkių siurbliai ir pūstuvai.

  • Gamintojas: MEMFLOW
  • Modelis: DMUCHAWA OGRODOWA SPALINOWA DO LIŚCI MEMFLOW
  • Galia: 750 W

➡ Do you want to clean the leaves from the driveway faster?

➡ Are you looking for equipment that combines blowing and vacuuming with shredding collected waste?

➡ Do you have a terrace, garden and further part of the plot to organize, and you want to work without a wire?

➡ BLOWING, ➡ VACUUMING AND ➡ SHREDDING

⚡ CAPACITY 4 KM

➡ INFLATE MIN. 252 KM/H

ENGINE LIFE 3000 H

🔪 HARDENED THREE-ARM KNIFE

♻ SHREDDING UP TO 10:1

🧺 ROOMY 55 L BAG

⛽ PRIMER AND ADJUSTABLE CARBURETOR

Leaves scattered around the driveway, dry grass residue and material left after the wind can lengthen cleaning. It allows you to gather them in the desired place with a stream of air before you proceed to collect.

  • Speed of at least 252 km/h — you direct a strong blow along the cleaned surface.
  • Flow of at least 10,2 m³/min — you move loose material while guiding the tip.
  • Freedom of combustion drive — you work in the driveway, at the fence and further down the plot.

You can use the blower for leaves, grass debris and small twigs, as well as when organizing surfaces with snow, mud or wet material. Select the setting and ending for the task at hand.

The two-stroke engine with a capacity of 25,4 cm³ drives the device during blowing and vacuuming. Efficiency — to up to 4 HP.

During vacuuming, the collected material passes through the shredding system. Three-arm hardened steel knife shreds leaves before they are collected in a bag.

  • Three knife arms — work when shredding the sucked material.
  • Tempered steel — provides wear resistance during the intended application.
  • Cutting up to 10:1 — allows you to limit the volume of collected leaves.
  • Collecting and shredding at the same time — you perform two stages while running the suction pipe.

With a declared ratio of 10:1, the material corresponding to ten volumes of loose leaves can occupy one after grinding. The effect depends on the type and condition of the collected material.

In a two-stroke engine, the oil added to the gasoline is responsible for lubrication. The right proportions are important for efficient operation, durability of components and reduction of excessive kicking.

Mixture 25:1, i.e.:

1 liter of petrol + 40 ml of 2T oil.

  • Proper lubrication — the oil reaches elements that require protection during operation.
  • Efficient combustion — properly prepared fuel supports stable engine operation.
  • Bright proportions — measure the mixture without guessing how much oil to add.
  • Oil selected for the engine — you use oil for two-stroke air-cooled units.

During the run-in period, which includes the first 2 to 3 fuel tanks, keep the ratio 25:1. Use the same mixture during further use.

The primer fuel pump prepares the fuel system for commissioning. Pressing three times helps bring fuel to the carburetor before pulling the starter cable.

After proper engine preparation, you can start working from the first stroke.

  • Primer — prepares the fuel system for start-up.
  • Start-up lever — is used to apply the setting appropriate for the start-up procedure.
  • Link starter — you start the engine after preparing the device.
  • STOP switch — you stop working after cleaning.

Apply a procedure suitable for a cold or warm engine and proceed to cleanup.

You get a blower with an adjustable carburetor. Proper setting of the fuel-air system supports efficient start-up and stable engine operation.

Prepare the mixture, mount the hardware and follow the startup steps described in the instructions. You can focus on cleaning the property.

The capacity of 55 liters gives space for subsequent portions of leaves. In combination with shredding, it allows you to collect material in a more compact form.

  • Large bag — collect more portions of waste in one place.
  • Adjustable shoulder strap — supports the bag and allows you to adjust its position.
  • Zipper — you open the bag and pour out the contents.
  • Two device handles — you run the equipment with both hands while vacuuming.

After turning off the engine and stopping the rotor, you empty the bag, close the lock and prepare the device for further work.

Loose leaves on the terrace and more material in the driveway require the selection of blowing force. Rotation adjustment allows you to adjust the setting to the place and work performed.

Gas lock helps maintain the selected setting while driving the device. You work at your own pace and direct the material where you want to gather it.

A set of accessories allows you to change the way you clean. You choose a tip for blowing or mount suction pipes and a bag to start collecting.

  • Exhaust pipes — are used to move leaves and collect them in the selected place.
  • Additional nozzle — focuses the stream at the selected surface fragment.
  • Suction pipes — direct dry leaves to the vacuuming system.
  • Knee with bag — creates the connection needed to collect the material.

First, organize the surface with a blower, then change the fixture and collect the leaves into a shredding bag. Before replacing the components, turn off the engine and wait for the rotor to stop completely.

In the set you get:

  • MEMFLOW combustion blower.
  • A set of exhaust pipes.
  • A set of suction pipes.
  • Additional nozzle for focused blowing.
  • Elbow to connect the device to the bag.
  • Collecting bag with zipper and adjustable belt.
  • Instructions for use in Polish.
  • Fuel mixture container
  • Candle wrench set and allen
  • Functions: blowing, vacuuming and shredding leaves.
  • Engine: two-stroke, gasoline, air-cooled.
  • Engine designation: 1E34F.
  • Capacity: 25,4 cm³.
  • Rated power: 0,75 kW.
  • Declared capacity: 4 HP.
  • Declared engine life: 3000 hours.
  • Maximum RPM: 7500 rpm /min.
  • Idle speed: 2800 ± 200 rpm. /min.
  • Air speed: ≥70 m/s, or ≥252 km/h.
  • Air flow: ≥0,17 m³/s, or ≥10,2 m³/min.
  • Capacity of fuel tank: 450 ml.
  • Fuel mixture: petrol and 2T oil in a ratio of 25:1.
  • Amount of oil: 40 ml per 1 liter of gasoline.
  • Start: manual, link.
  • Carburetor: adjusted.
  • Control: primer, start lever, gas trigger, speed control, gas lock and STOP.
  • Chipping knife: three-arm, hardened steel.
  • Declared degree of fragmentation: to 10:1.
  • Bag capacity: 55 l.
  • Bag: zipper and adjustable shoulder strap.
  • Length of suction pipe: 97 cm.
  • Exhaust pipe length: 94 cm.
  • Noise level according to instructions: ≤108 dB(A).
  • Ignition candle: L7TC.
  • Net weight of blower: 4,3 kg.
  • Gross weight: 6,9 kg.
  • Color: orange with black elements.

❓ Does the device collect and shred leaves at the same time?

Yes — the material is vacuumed, shredded and directed into the bag. You combine two stages of work when running the suction pipe.

❓ What mixture to prepare?

Use the 25:1 ratio according to the MEMFLOW instruction. There is 40 ml of oil per litre of petrol for two-stroke air-cooled engines.

❓ Should I change the proportion of the mixture after reaching?

No — the MEMFLOW statement indicates a 25:1 mixture. Keep proper proportions also during further operation.

❓ What is responsible for a quick start?

Primer prepares the fuel system, and an adjustable carburetor supports the proper operation of the engine. After preparing the device according to the procedure, it is possible to start at the first stroke.

❓ Can I adjust the blowing force?

Yes – you choose the turnover to the workplace and the amount of material. Gas lock helps maintain the selected setting.

❓ Can I vacuum wet leaves?

You can also vacuum wet leaves.

❓ How to empty the bag?

Turn off the engine and wait for the rotor to stop. Then unzip the zip and pour out the contents.

❓ Is the accessory for both modes included?

Yes — you get blowing and vacuuming pipes, an extra nozzle, elbow and bag. You can use both modes without purchasing the listed items.

Specifications

Group Name Value
Parametry Condition new
Parametry Invoice With a VAT invoice
Parametry Brand MEMFLOW
Parametry Power supply combustion
Parametry Shredding option grinding option
Parametry Bag size 55 l
Parametry Tool weight 4.5 kg
Parametry Tool length 97 cm
Parametry Power range 0–4 KM
Parametry Power 750 W
Parametry European emissions standard EURO 6
Parametry Product weight with unit packaging 5.5 kg
Parametry Manufacturer code DMUCHAWA OGRODOWA SPALINOWA DO LIŚCI MEMFLOW
Parametry Batteries included no
Parametry Output 10.2 m3/min
Parametry Air velocity 245 km/h
Parametry Packaging status original
Parametry Certificates of conformity CE
Parametry Noise level 108 dB

Pristatymo terminas visoje Lietuvoje: 5-7 d.d.
Pristatymo kaina nurodytu adresu: Pristatymas nemokamas

Susijusios prekės

Nesenai žiūrėtos