Sodo priekaba keturračiui, 350 l, 300 kg

Trumpai apie prekę

Prekė: Sodo priekaba keturračiui, 350 l, 300 kg. Kategorija: Karutai ir sodo vežimėliai.

• Gamintojas: Higher
• Modelis: OL-KOL-350
• Talpa: 350 l

✅ Leverage 300 kg with Polish construction

✅ Best anti-corrosion - powder coating

✅ Universal hitch

⭐ Giant capacity 350 L

⭐ Dumper function (kip)

⭐ Super stable thanks to two wheels

TECHNICAL DATA

• Model: Collection 350 L with tipper
• Brand: HIGHER
• Maximum load: 300 kg
• Bowl capacity: 350 L
• Wheel type: pneumatic 4.00 x 8.00 on steel rim
• Bottom reinforcement: welded steel sheet 2 mm thick
• Frame: steel pipe ø 38 mm thick 1.2 mm
• Construction: welded, structural pipes welded with bottom
• Color: black, submersible painted
• Balancing: welded bottom and bowl rim fenders
• Hitch: universal, fits most tractors / garden mowers / quads

DIMENSIONS

• Overall length (dimension A): 131 cm
• Overall width (dimension B): 90 cm
• Handle width (dimension C): 57 cm
• Overall height (dimension D): 93 cm
• Bowl length (dimension E): 111 cm
• Height to handle (dimension F): 66 cm
• Drawbar length - from the back of the wheel (dimension G): 100 cm

THE MOST IMPORTANT ADVANTAGES

➡ Poland construction - designed and made in the country for the highest strength

➡ Reinforced bottom thanks to the use of 2 mm steel sheet, which increases the resistance of the bowl to damage by 30-40%

➡ Instant discharge of the load thanks to a simple tipper mechanism. Kiprowanie possible thanks to the release mechanism.

➡ Super durable, thanks to the welded frame made of ø38mm pipes. Load up to 300kg!

➡ Dip painted, so the steel structure is protected from rust for years! The highest level of anti-corrosion

➡ The attachment is universal and fits most garden tractors, lawn mowers or quads!

➡ Super fast assembly. The cradle is equipped with a drawbar with an immobilizing buckle for quick installation.

➡ Quick discharging system allows you to get rid of the load instantly, saving your time and spine

➡ Ultra stable thanks to wide pneumatic wheels on steel rims. In addition, the wheels provide a stable ride on any terrain.

CONSTRUCTION SCHEME

1. Articulated drawbar with universal hitch
2. Steel reinforcement of the front rim of the bowl
3. Steel support foot
4. Pneumatic wheels on steel rim
5. Handle for kip
6. Thick pipe structural
7. Steel sheet strengthening the structure and the bottom of the cradle
8. Thick, reinforced axle with wheel mount
9. Strong and durable plastic bowl

Accelerate your work and achieve more in less time

The wheel for the tractor is not a luxury, but a tool that radically speeds up work. Thanks to it, you will do what would normally require several hours of work with the wheelbarrow, in several minutes. Maximum loading capacity of 300kg and large capacity minimize the number of courses. The quick tipping function reduces unloading time to a minimum. Whether you're cleaning your garden, transporting material for construction, or tackling an orchard, our cradle will help you achieve more in less time.

Do it faster and more conveniently!

Universal hitch for tractor and mower - quick connection

Our cradle is designed for full compatibility. It is equipped with a universal drawbar with a hitch that fits most garden tractors, self-propelled mowers and quad vehicles, having a standard towbar. Installation is instant and is done with a simple buckle and pin. So, you don't have to worry about the fit - just hook it up and go. The entire clamping mechanism is solidly welded, which ensures stable and safe pulling of the cradle even under full load.

Attach the trailer to your quad, tractor or lawn mower!

Uncompromising welded construction with guaranteed rigidity

The secret of the extreme strength of the HIGHER® cradle lies in its construction. Instead of twisted elements that catch loose over time, we used a welded frame made of thick ø38mm steel pipe with a wall of 1.2mm. This technology increases the rigidity and stability of the whole by as much as 50%. The structural frames are permanently welded to the reinforced bottom of the bowl, creating a monolithic and perfectly balanced structure that can withstand a load of up to 300kg.

Strength without compromise!

Steel bottom reinforcements - no more bowl cracks

The bottom of the bowl is the most loaded element. That is why we have equipped our cradle with welded reinforcement made of thick 2mm sheet metal. It is a massive, durable solution that not only increases the life of the bowl by 30-40%, but also protects it from puncture with sharp debris, stones or wood. This allows you to transport the heaviest and most problematic materials without worrying about damaging the container.

Box made of durable plastic!

Maximum corrosion protection thanks to immersion painting

In order for your cradle to serve for years, the frame has been secured with the best method - immersion painting. This process ensures that the paint reaches every nook, weld, and other hard-to-reach areas in the structure. This provides unparalleled protection against moisture, corrosion, and changing weather conditions. This is crucial in equipment that works outdoors, in mud, rain or when in contact with damp materials.

Atmospheric conditions are not terrible!

Lightweight and durable 350L thick plastic bowl

The cradle container is a huge bowl with a capacity of 350L made of thick, flexible plastic. The material is ideal for transportation because it is impact resistant, does not corrode like sheet metal, is easy to wash, and at the same time is much lighter than metal. The bowl is additionally supported along the entire length by a steel frame and has a steel rim protection. This combination of materials gives you the best bowl on the market.

Dump truck in less than 5 seconds - save time and spinal

The built-in tipping function is a revolution in transport work. No more manually shoveling the ground! With a sturdy release mechanism, you can tilt the entire bowl in one motion, spilling its contents where you need them. The process takes literally a few seconds, saving you time that you would spend getting off the tractor and emptying the shovel multiple times. The steel fender on the front of the bowl serves as a support for kiping, protecting the entire structure.

Perfect balance and stable ride thanks to the two-wheeled design

Thanks to the use of two pneumatic wheels and the precise arrangement of the reinforced axle, the cradle is perfectly balanced. Even when you load it up to a maximum of 300kg, the ride is smooth and the risk of tipping over is minimal. Wide wheels do great in uneven terrain - on grass, gravel, sand or construction - without the risk of collapsing or swaying. This way, you can fully focus on driving, not on keeping an eye on the load.

Articulated drawbar ready to work and to stop

In our cradle, the drawbar performs two functions: transport and parking. A solid drawbar with a hitch is a structural element that is at the same time compact enough. And most importantly, the cradle is equipped with a metal support foot. This simple, robust component allows the cradle to be placed firmly and securely on the ground when the tractor is disconnected, eliminating the risk of it tipping over. Thanks to this, you do not have to support it with bricks or boards - the cradle stands stable and waits for the next course.

Guaranteed multitasking - what can you transport?

This guy's not afraid of challenges. It is designed to transport any type of material you encounter in your garden or construction site. Ideally suited for transporting land, sand, compost, gravel and debris (thanks to the reinforcement of the bottom), transporting leaves, branches and garden materials (thanks to the large capacity) and transporting firewood and heavy tools. It is a truly universal solution that will instantly increase the efficiency of your work.

Durable tires and rims ready for rough terrain

Wheels are another key element. We used pneumatic tyres in size 4.00x8.00, which effectively absorbs shocks and provides excellent grip. Tyres are mounted on durable steel rims, which are much more robust than their plastic counterparts. This set makes it easy for the cradle to overcome curbs, muddy ground, roots, and other irregularities, protecting both the load and the structure.

Easy storage and cleaning

Despite its robust construction and 350L capacity, the wheel, when detached from the tractor, is relatively easy to maneuver and stable to place on steel support feet. The plastic bowl is easy to wash with a hose - just a moment to get rid of leftover soil or mortar. This will keep your equipment ready to go whenever you need it again.

Polish production - focus on quality and experience of the industry leader

By choosing our cradle, you are investing in a product designed and made in Poland. This is a guarantee of attention to detail, durability of materials and the use of many years of experience in the production of professional work equipment. By purchasing from HIGHER®, you support the Polish economy and ensure that the equipment meets the highest standards that you can rely on in all conditions.

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With VAT invoice
Parametry	Kind	wheelbarrow
Parametry	Brand	Higher
Parametry	Capacity	350 l
Parametry	Wheels number	2
Parametry	Product weight with unit packaging	35 kg
Parametry	Manufacturer code	OL-KOL-350
Parametry	EAN (GTIN)	5907335471824
Parametry	Packaging status	original