Pristatymo terminas visoje Lietuvoje: 5-7 d.d.
Pristatymo kaina nurodytu adresu: 3 eur
Aprašymas
Trumpai apie prekę
Prekė: Sodo traktorius Faworyt TR88 MB, 9,8 AG, su šoniniu išmetimu. Kategorija: Traktoriai.
- Gamintojas: Faworyt
- Modelis: TR88 MB
- Galia: 7.2 kW
Efficient tractor with side ejection and manual transmission
Faworyt TR88 MB is a practical garden tractor designed for fast and convenient mowing of medium and larger green areas.
The machine is equipped with a single-cylinder Loncin LC1P85FA engine with a capacity of 352 cm³, a manual gearbox, a cutting unit with two knives and a side ejection system of mowed grass.
The 84 cm working width allows you to efficiently mow extensive lawns, while maintaining good maneuverability between trees, rebates and other obstacles.
The tractor offers electric motor start, electromagnetic knife switching, reversing mowing, LED lighting, rear hitch and six-stage cutting height adjustment.
The most important advantages
- Loncin LC1P85FA engine,
- engine capacity 352 cm³,
- rated power 7,2 kW,
- power about 9,8 hp,
- maximum torque of 21 Nm,
- cast iron cylinder sleeve,
- electric starter,
- manual transmission,
- five forward runs,
- reverse gear,
- cutting width 84 cm,
- two cutting knives,
- lateral ejection of grass,
- six levels of cutting height,
- adjustment range from 30 to 90 mm,
- electromagnetic actuation of knives,
- the possibility of mowing in reverse,
- adjustment of the aggregate from the position of the operator,
- two support wheels,
- minimum turning radius of 45 cm,
- LED lighting,
- front bumper,
- rear hitch,
- connector for washing the unit,
- fuel tank 8,5 l,
- suggested mowing area up to approximately 3000 m².
Loncin LC1P85FA engine with a capacity of 352 cm³
The tractor is powered by a single-cylinder, four-stroke Loncin LC1P85FA engine.
The unit with a capacity of 352 cm³ develops a rated power of 7,2 kW, or about 9,8 hp, and a maximum torque of 21 Nm.
The engine provides adequate performance to drive the chassis and two-legged cutting unit with a width of 84 cm.
The power supply helps to maintain stable operation during:
- mowing dense turf,
- work on slightly uneven terrain,
- driving with full working width,
- overcoming gentle hills,
- cooperation with light pulled accessories,
- regular care of larger lawns.
Power 7,2 kW – about 9,8 hp
The rated engine power is 7,2 kW, which corresponds to about 9,8 hp.
This parameter allows you to efficiently drive two cutting knives and the tractor suspension system.
It should be remembered that the actual mowing efficiency also depends on:
- height of grass,
- moisture content of turf,
- sharpness of knives,
- selected driving speed,
- set cutting height,
- landforms.
With high or dense grass, it is recommended to drive slower and set a higher cutting level.
Torque 21 Nm
The maximum torque of 21 Nm helps the engine to maintain stable operation under changing loads.
This is especially important during:
- moving,
- mowing denser parts of the lawn,
- work on small inclines,
- driving the aggregate with two knives,
- Driving with light equipment connected.
Cast iron cylinder sleeve
The engine is equipped with a cast iron cylinder sleeve.
The solution increases the unit’s resistance to:
- abrasion,
- elevated temperature,
- intensive exploitation,
- long-term work under load.
The cast iron bushing is a particularly important component in the tractor engine designed for regular care of larger areas.
Two-stage air filter
The Loncin LC1P85FA has a two-stage air filter.
When mowing around the machine, dust, dust and small parts of grass float. An effective filter helps to reduce the entry of contaminants into the engine.
Regular inspection and cleaning of the filter helps:
- maintain full engine power,
- reduce fuel consumption,
- maintain proper combustion,
- protect the cylinder and piston,
- extend the life of the unit.
Air cooling
The engine is cooled by air flow.
The system does not require the use of coolant, but requires keeping the covers and ventilation openings clean.
Accumulated grass or dust can limit airflow and cause the unit temperature to rise.
Electric starter
The tractor is activated by an electric starter.
The operator can turn on the engine comfortably from the seat position, without the need for a starting cable.
The solution increases comfort especially during:
- frequent starting of the machine,
- longer work with breaks,
- use of the tractor by people who do not want to use a manual starter
Oil system 0,8 l
The capacity of the oil system is about 0,8 liters.
The manufacturer indicates SAE 30 grade oil. The viscosity of the lubricant should always be adjusted to the ambient temperature and instructions.
Before each start, check the oil level on an even substrate.
The engine does not have a replaceable oil filter, so it is especially important to comply with the lubricating agent replacement deadlines.
Euro V emission standard
The unit meets the Euro V emission standard for combustion machinery used off public roads.
The modern design of the engine combines adequate power with requirements for reducing exhaust emissions.
Reverse gear
The tractor allows you to retract, making it easy to:
- departure from a tight place,
- manoeuvring at the fence,
- turning between trees,
- setting the machine at the trailer,
- correction of the unworn fragment.
Before starting to reverse, make sure that there are no children, adults, animals or obstacles behind the tractor.
Cutting width 84 cm
The cutting unit includes a grass belt with a width of 84 cm.
It is a beneficial combination of high efficiency and good maneuverability. The tractor can mow much faster than a traditional guided mower, while remaining comfortable in gardens with trees and rebates.
The width of 84 cm is suitable for:
- medium and large lawns,
- private property,
- recreational plots,
- areas around farms,
- orchards,
- company areas,
- surfaces with numerous obstacles.
Two cutting knives
The unit is equipped with two knives.
The joint operation of the knives allows you to evenly mow the full working width and direct the clippings to the side ejection channel.
The condition of the knives directly affects:
- cutting quality,
- uniformity of turf,
- engine load,
- the effectiveness of grass ejection,
- vibration level of the unit.
Knives should be regularly inspected, sharpened and balanced.
Lateral grass ejection
The mowed material is removed through the side ejection channel.
The solution allows you to mow without a basket and without having to stop to empty the collected material.
Side ejection is particularly beneficial during:
- mowing larger areas,
- work with higher grass,
- care of commercial areas,
- mowing orchards and plots,
- situations where the collection of clippings is not necessary.
Before starting work, the side deflector should be properly mounted.
Six-stage height adjustment
The cutting height can be set on one of six levels ranging from 30 to 90 mm.
This allows you to match the result to:
- seasons,
- the condition of the lawn,
- type of turf,
- mowing frequency,
- the current height of the grass,
- uneven terrain.
At the first mowing of high grass, it is best to set a higher height, and if necessary, make a second pass with a lower setting.
Lifting the unit from the operator’s position
The height of the unit can be changed without leaving the tractor.
The operator can quickly lift the cutting unit before passing through:
- paved path,
- curbstone,
- an uneven part of the terrain,
- A place that should not be mowed.
lectrromagnetic attachment of knives
Knives are activated by means of an electromagnetic clutch.
The operator can turn the unit on and off with a button or switch from the seat position.
The solution is more convenient than a mechanical lever-switched system and allows you to quickly stop knives from passing through a surface other than grass.
Mowing in reverse
Faworyt TR88 MB allows mowing when reversing after activating the function provided by the manufacturer.
This is useful:
- between the trees,
- in the corners,
- at the fence,
- when correcting a part of the lawn,
- in places without the possibility of a full relapse.
This function should only be used with extreme caution.
Minimum turning radius 45 cm
The minimum turning radius is about 45 cm.
This allows you to conveniently bypass:
- trees,
- shrubs,
- rebates,
- posts,
- elements of small architecture,
- corners of buildings.
Good maneuverability is especially important in an irregularly shaped garden.
LED lighting
Front LED lighting improves the visibility of the machine and the space in front of the tractor.
It can be useful when working:
- on a cloudy day,
- under the trees,
- in the morning or at the end of the day,
- in a less illuminated part of the property.
Lighting does not mean that the tractor is allowed to enter traffic.
Seat with safety switch
The operator’s seat is equipped with a presence sensor.
The system controls whether the user is in the right place. Lowering the seat with the aggregate running or the drive running may cause the machine to stop according to the security configuration.
Rear hitch
The tractor has a hook for connecting compatible pull accessories.
It can cooperate, among others, with:
- light garden trailer,
- spreader,
- aerator,
- with a garden shaft,
- Pull-on sweeper.
Before connecting, check the weight of the fixture and the permissible load on the hitch.
Connector for washing the unit
The cutting unit is equipped with a connector for connecting a garden hose.
After mowing, you can rinse the inside of the housing, limiting the accumulation of grass and sediment.
Regular cleaning helps:
- maintain the patency of the ejection channel,
- reduce corrosion,
- maintain effective removal of clippings,
- facilitate the maintenance of the machinery.
Wheels adapted to driving on the lawn
The tractor has:
- front wheels with a diameter of about 34 cm,
- rear wheels with a diameter of about 44 cm.
The larger rear wheels help maintain traction, while the smaller front wheels make it easier to steer.
When driving on wet turf, avoid sudden starting, braking and sharp turns that can damage the turf.
Suggested area up to approximately 3000 m²
The manufacturer indicates application on lawns with an area of up to about 3000 m².
This is an indicative value. Actual performance depends on:
- the shape of the plot,
- number of obstacles,
- slope of the terrain,
- height and density of grass,
- the selected gear,
- mowing frequency.
In an open and regularly cared for area, the tractor can work particularly efficiently.
Dimensions of the machine
- length: about 187 cm,
- width: about 117 cm,
- height: about 110 cm.
Practical tractor for fast mowing without a basket
Faworyt TR88 MB combines a powerful Loncin 352 cm³ engine, a manual transmission and an 84 cm wide cutting unit.
The side ejection allows you to work without downtime to empty the basket, and the five forward gears allow you to adjust the pace of the ride to the height of the grass and off-road conditions.
Electromagnetic switching of knives, mowing during reversing, LED lights, turning radius 45 cm and rear hitch increase the convenience and possibilities of using the machine.
It is a good choice for users looking for a simple, robust and efficient tractor for regular care of medium and larger areas.
Specifications
| Group | Name | Value |
|---|---|---|
| Parametry | Condition | new |
| Parametry | Invoice | With VAT invoice |
| Parametry | Internal combustion engine power | 10 KM |
| Parametry | Power | 7.2 kW |
| Parametry | Series | TR |
| Parametry | Drive | all-wheel drive |
| Parametry | Brand | Faworyt |
| Parametry | Basket | without a basket |
| Parametry | Basket capacity | 0 l |
| Parametry | Mowing height adjustment | with adjustment |
| Parametry | Mowing width | 88 cm |
| Parametry | Motor manufacturer | Loncin |
| Parametry | Engine displacement | 352 cm³ |
| Parametry | Method of fixing wheels | ball bearings |
| Parametry | Mowing height adjustment type | central |
| Parametry | Mowing height adjustment range | 3–9 cm |
| Parametry | Number of mowing adjustment stages | 6 |
| Parametry | Tool weight | 198 kg |
| Parametry | Functions | side discharge |
| Parametry | Manufacturer code | 38056505 |
| Parametry | EAN (GTIN) | 5904679250016 |
| Parametry | Batteries included | no |
| Parametry | Packaging status | original |
| Parametry | Model | TR88 MB |


