Pristatymo terminas visoje Lietuvoje: 5-7 d.d.
Pristatymo kaina nurodytu adresu: 3 eur
Aprašymas
Trumpai apie prekę
Prekė: Sodo vandens siurblys IBO WZI750, 0,75 kW, hidroforui. Kategorija: Siurbliai ir hidroforai.
- Gamintojas: IBO
- Modelis: WZI-750
The WZI750 IBO pump is a single-stage pump with a fairly good maximum capacity of 50 liters per minute and a good pressure of 6 atmospheres. It has one brass rotor and as one of the few has a built-in check valve (closed in a cast iron housing that is also a hydraulic housing). This is a very popular model mainly due to the very low price and good service life. The pump has cast iron legs with four holes, which allows the pump to be mounted on a hydrophore tank.
The WZI 750 IBO pump is also suitable for use in a traditional hydrophore set with a diaphragm or galvanized tank. Unfortunately, the pump is quite sensitive to sand particles and various types of contaminants, so it is worth using an anti-sand filter with appropriate efficiency, which will protect the pump from blurring or impeller blockage. The filter will also protect the check valve in the pump and the gland from wearing out too quickly.
WZI 750 pump often installed with automatic. Thanks to this, the design is lightweight and easy to carry, it is important if we are going to move it, for example, take the pump from the plot for the winter or before . clothes.
It is also often used in hydrophore sets with 24 liter or 50 liter tanks - they are available in our store. Efficiency and pressure allow you to power a small irrigation system or a holiday home or caravan. The pump is not suitable for connection with hydrophore tanks above 80L.
- Maximum capacity (l/min): 50
- Maximum capacity (m3/h): 3
- Maximum pressure (Bar): 6
- Lifting height (m): 60
- Suction capacity (m): 8
- Engine Power (W): 750
- Engine power (kW): 7.5
- Power supply V: 230
- Suction nozzle size (inches): 1
- Piston stub size: 1
- Connection Thread Size (inches): 1
- Weight: 9
- Pump dimensions (H x W x L) cm: 21x18x28
- Maximum liquid temperature: 35°C
- Maximum ambient temperature: 40°C
- Insulation Class: B
- Operating Mode: Continuous
- Degree of protection: IP44
- Motor speed: 2850 RPM
- Pump body: cast iron
- Shaft and rotor: AISI 304 stainless steel
- Impeller: Brass
- Mechanical angina: ceramic / graphite / NBR
Specifications
| Group | Name | Value |
|---|---|---|
| Parametry | Condition | new |
| Parametry | Invoice | With VAT invoice |
| Parametry | Manufacturer | IBO |
| Parametry | Pump type | submersible |
| Parametry | Engine power | 750 W |
| Parametry | Manufacturer code | WZI-750 |
| Parametry | EAN (GTIN) | 5903111344221 |
| Parametry | Maximum pump output | 3000 l/h |