Stumdomų vartų komplektas FORCE GT400LS, iki 8 m, 400 kg, su WiFi valdymu

Trumpai apie prekę

Prekė: Stumdomų vartų komplektas FORCE GT400LS, iki 8 m, 400 kg, su WiFi valdymu. Kategorija: Kietieji diskai.

• Gamintojas: Force
• Modelis: GT400 LS
• Įtampa: 230 V

COMPOSITION OF THE SET:

• 2x FORCE GT400 LS actuator with built-in motion limiters
• Control panel
• Housing for the control panel
• Pair of 180 degree rotating photocells (1pcs transmitting, 1pcs receiving) FORCE 180
• 4x 433 MHz 4-channel remote controls
• LED signal lamp with antenna for increased remote control range
• Mounting brackets for gate posts and wings
• Force Smartbox Wifi (to control the gate from a mobile phone)
• Emergency decoupling key 2 pcs.
• Instructions for installation of actuators and programming of the in Polish
• Technical support during assembly - telephone

• PERFECT SOLUTION FOR HOME GATES The FORCE GT 400 LS is the most practical and economical solution when automating a gate with a wing length of up to 4 m (two wings together 8 m). The drive is equipped with horn actuators – self-locking and therefore does not require the use of additional locks. FORCE GT 400 LS actuators have a 150W motor and a thrust of 2500 N!!! Which makes this model the strongest on the market in its price class.
• EASY INSTALLATION AND RELIABLE OPERATION Due to its tube design and the way the actuators are attached to the gate (from the front), the FORCE GT400 LS drive is quick and easy to install, without the need for expensive adaptive modifications. The great advantage of GT400 LS actuators are built-in actuator wing movement limiters on opening and closing. Thanks to this, you do not need to mount fenders / stops to the ground, which are designed to stop the wings in extreme positions. Often, the installation of such fenders can be troublesome and time-consuming, especially when the lower part of the gate is at a considerable distance from the ground, such a high fender would be impractical and often visually undesirable. However, with the FORCE GT400 LS, you can quickly and easily set where the gate should stop on the abrasion and on the closure without mounting anything to the ground. With the FORCE GT400 LS, you can install it quickly, easily and aesthetically.
• SAFETY Crush protection is provided by an electronic module installed on the control panel board, which directly controls the thrust of the drive. In the event of a failure, the unlocking mechanism allows you to unlock the gate wings and operate manually.
• MINIMUM OPERATING COSTS, HIGH RELIABILITY The cost of operating the FORCE GT400 LS electromechanical drive is definitely minimal. The device works reliably in all weather conditions, in the range of external temperatures from-20°C to +55°C.

TECHNICAL DATA OF ACTUATORS:

• Power Supply: 230V
• Motor power supply: 230V
• Power Consumption: 140 W
• Power Consumption: 1,2A
• Engine speed: 1400 rpm /min
• Stem extension speed: 1,5 cm/s
• Maximum thrust: 2500 N!!!
• Operating temperature range: -20°C / +55°C
• Thermal protection: 140°C
• Degree of protection: IP54
• Weight: 7 kg
• Built-in limit switches in the actuator for opening and closing (does not require screwing the fenders/stoppers to the ground)

CONTROL PANEL

• force adjustment separately for each actuator (8 levels)
• braking of the gate wings (gentle termination of the gate movement)
• operation of limit switches for opening and closing
• automatic closing function after passing the vehicle
• built-in radio that supports the work of remote controls
• very simple programming
• second wing delay function
• support for complete and partial opening of the gate (gate function)
• entrance to the signal lamp
• possibility of controlling the entrance gate N.O. (with intercoms, button from home, mobile phone)

4 x 4-channel gate remote control in metal housing

Remote control for 4-channel gateway, with dynamically randomly variable code with a frequency of 433.92 MHz. Gateway remotes will help manage home automation. Each gate remote has its own identity code – so that the remotes can be copied to the remote control. The remote controls are campatable with FORCE 760/2000/Best 600/ GT400LS / GT500 / GT600 / V400 drives are not compatible with other 433,92 MHz gate remotes.

Rotary photocells FORCE F180 - 180 degree adjustment

Technical specification:

• Dimensions: 108 x 35 x 30 mm
• Power supply: 12-24 V DC/AC
• Range: max 15 m
• Current Consumption: RX 15Ma - TX 30mA
• Relay: 1A, max 36V
• Frequency: 1,92 KHz
• Wavelength: 940 nm
• Operating temperature: -20 to +55°C
• Viewing angle: 180 degrees (adjustable)
• Operation: from all angles (vertical and level)
• Weight: 105g
• Pins for mounting included

Convenient to install, because on narrow metal posts they can be mounted on the planes of the post from the outside (from the side of the road) and only rotate the electronics element 90 degrees towards the second photocell so that the photocells "see each other".

Control is carried out via the TUYA application, which is available for smartphones and tablets (Android and iOS, Play Store and AppStore). It allows you to connect multiple devices that have a TUYA controller, so you can control devices such as: entrance and garage gates, roller shutters, cameras, alarm, lighting, heating, air conditioning, power sockets, etc. with one application from your phone. We can control the application from anywhere in the world with Internet access. You can control the gate while being away from your property, e.g. at work or on vacation.

The service application is available in Polish

Specification:

• Input voltage: AC 100v ~ 240V
• Working Frequency: 2.4G~2.4835GHz
• Security mechanism: WPA/WPA2
• Working environment: temperature: -10℃~+55℃ humidity: 20%~93%
• Dimensions: 46x46x18 mm

The set includes:

• WiFi driver
• 1x reed switch
• User manual in Polish
• Packaging

Indicator lamp FORCE CRYSTAL

Tasteful design, universal LED warning lamp.

• The lamp is designed for use in systems that do not control the pulsation of light themselves, as well as in systems that control light themselves.
• Built-in antenna for increased remote control range
• Mounting base for mounting to a vertical plane
• 360 degree direction of illumination
• Operating mode: continuous illumination/pulse illumination
• Light pulsing frequency: 1 Hz/0 Hz (60 flashes per minute/continuous light)
• Power consumption (continuous illumination): 2,5 W

• Just loosen the screw and moving it at the same time move the magnetic switch to the left or right, in this way we adjust where the gate leaf is to stop. After obtaining the appropriate place to stop the wing, tighten the screw. It's done. Limit switch set.

MOUNTING BRACKETS

• handles for fixing actuators, set of handles for fixing on posts and gate wings
• galvanized

OTHER ACCESSORIES

• Mounting plungers for fixing actuators to mounting brackets
• Unlocking keys in case of power outage
• 2x Starting capacitor
• 2x Gland for sealing the entrance of wires to the control panel housing
• Installation instructions in Polish

MOUNTING DIMENSIONS OF ACTUATORS GT 400 LS

Recommended installation dimensions:

maximum dimensions in mm to:

A: to 195 B: to195 D: to 135 Z: 60 L: 1090

Angle opening of the gate wings up to 110 degrees.

Specifications