Suvirinimo aparatas aliuminiui KD3434, 255A, MIG/MMA/TIG, inverterinis

Trumpai apie prekę

Prekė: Suvirinimo aparatas aliuminiui KD3434, 255A, MIG/MMA/TIG, inverterinis. Kategorija: Inverteriniai suvirinimo aparatai.

• Gamintojas: Kraft&Dele
• Modelis: KD3434

✅ KRAFT&DELE is Poland company that constantly ensures that its products are:

⭐ No. 1 quality, refined, failure-free, comfortable at work, unrivaled in price-quality

✅ Service ✅ parts - everything available immediately in Poland 24/7

MODERN model KD3434. for welding STEEL and ALUMINUM

⭐MIG ⭐ Flux ⭐ MMA ⭐ TIG-LIFT ⭐ ALU ⭐ SYNERGY 255A

-

✅ Steel housing to support high-power transistors

✅ The best quality wires in this class, COPPER

✅ Large control panel, clear parameters and very easy to set up

✅ Synergy 255A - automatic selection of parameters depending on the selected welding method

-

✅100% satisfaction or your money back ⭐

✅ KD3434 is one of the strongest welding machines available on the market in this price class! 100% INVERTER. 255A!

✅ Every even the simplest INVERTER is incomparably BETTER than even the most expensive outdated transformer

⭐ EFFICIENCY and POWER ⭐ not comparable to others in this price segment

⏩ KD3434’s large capabilities allow us to weldaluminum, copper, steel, stainless steel, carbon steel and more.

• MIG ✅
• Flux ✅
• MMA ✅
• TIG-LIFT ✅
• ALU ✅
• SYNERGY 255A ✅

✅ Advanced control panel allows for smooth control of operating parameters.

Selection of MIG / MMA / TIG operating mode

⭐ Two-bar 2t - pressing the button initiates gas outflow and welding current, releasing the button turns off welding current and gas outflow

⭐ Four-point 4t - pressing and releasing the handle button initiates gas outflow and welding current, re-pressing and releasing the button turns off the welding current and gas outflow,

⭐ SPOT - for spot welding

Fully automatic wire feed.

.

✅ Gas selection:

⭐ Co2 - 100%Co2

⭐ MIX - Argon/CO2 blend

⭐ ALUMINIUM - for welding aluminium alloys with magnesium in argon sheath

⭐ FLUX - without gas, self-shielding wire

✅Wire application:

0.8/1.0mm

⏩ Enlarged fan - increased cooling

⏩ TOP QUALITY ⭐ TROUBLE-FREE WIRE FEEDER

⭐ You do not need to be an experienced welder to bond this metal welding machine with a strong melt, functions used in the most expensive welding machines are included in this device!

░░░

It is not a problem to bond the material and show a nice superficial weld

The trick is to bond the material with a large melt, nicely laid weld, practically self-departing trail, which is a guarantee that the weld is clean, full, durable

-

The KD3434 welding machine has high parameters, and all the functions that allow you to bond the material in this way!

• - Bulk holder ⭐
• - MIG/MAG ⭐ handle
• - MMA ⭐ handle
• - Welding mask ⭐
• - Wire brush ⭐

⭐ Thanks to its design, the KRAFT&DELE KD3434 migomat welder will be used both in home workshops and households as well as in more professional applications, such as performing field work and all kinds of repair work inside buildings.

⭐ Migomat by KRAFT&DELE is a device with a wide range of applications, designed as an inverter power source enabling welding with hot melt wire in a gas shield MIG/MAG, welding with a buffer electrode MMA, welding Aluminium a also using the TIG Lift method.

⭐ The electronics of the device are based on transistors combining the advantages of two types of transistors ease of control of field transistors and high breakdown voltage and switching speed of bipolar transistors. The welding current is very stable, which guarantees a perfect weld. The device is lightweight and compact.

Adjustment of welding parameters is carried out steplessly (smoothly), maximum welding current depends on the thickness of the wire / electrode used, welding voltage, as well as the speed of wire feeding in the case of the MIG / MAG method. The feeder works with wire with a diameter of 0,8 / 1,0.

The high efficiency of the welding machine allows for welding with 255A current (for MIG / MAG), and 255A for (TIG) 230A MMA in 60% of the duty cycle. The thermal switch will turn off the device if the permissible operating cycle for a given welding current is exceeded, which will prevent overheating of the welding machine.

The current parameters of the device during welding are displayed on two, very readable displays facilitating the selection of optimal operating parameters. Comfortable and very readable manipulators allow you to change welding parameters even with gloves on.

⏩ KNOWLEDGE BASE - Technical data

⌛⚙

• Brand: KRAFT&DELE ❤
• Model: KD3434 ❤
• Supply voltage: 230V ⭐
• Frequency: 50Hz ⭐
• Welding methods: MIG/MAG, MMA, Tiglift
• Working cycle: 60% ⭐
• Electrode range: 1,6-4 mm ⭐
• Wire diameter: 0.8 / 1.0 mm⭐
• Wire feeder: 2 - roller ⭐
• Insulation class: F ⭐
• Degree of protection: IP21S ⭐
• MIG welding current: 35-255A ⭐
• MMA welding current: 25-230A ⭐
• TIG welding current: 15-255A ⭐
• Weight of the device: 12,5kg ⭐

✅ DESCRIPTION OF PANEL ELEMENTS

The SPOT function in the semi-automatic welding machine allows you to make short point welds at a specific time, which makes it easier to connect thin sheets without the risk of burnout.

The BURNBACK function in the semi-automatic welding machine automatically retracts the wire after welding, preventing it from sticking to the material or current tip.

It is a voltage reduction system whose task is to turn off the power supply within a few milliseconds after welding. This function is also responsible for reducing the voltage on the wrapped electrode to a safe level. The VRD function turns the welding power on and off when the electrical resistance between the electrode and the welded element measured during operation is the appropriate level. When the device is not working, VRD automatically reduces the secondary circuit voltage between the welding tips from 105 V to 14-24 V (this takes several milliseconds).

The feeder allows precise extension of the welding wire, excluding its slippage.

- works with wire with a diameter of 0.8/1.0mm

✅ Bulk Holder

✅ MMA welding torch

✅ MIG/MAG welding torch

✅ + PRACTICAL WELDING MASK

✅ + WIRE BRUSH

░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░

The presented model of the welding machine has a standardized EURO socket, thanks to which we can connect any MIG/MAG welding torch that has this plug to the device.

Migomat allows welding with self-shielding wire without the need for shielding gas.

FLUX welding combines the advantages of MIG/MAG welding (wire wound on a spool, is fed using a feeder to the handle) and MMA (there is no need for shielding gas).

After its installation, the welding machine turns into a TIG welding machine while maintaining many parameters of expensive TIG devices.

• KD3434 255A inverter welder
• MMA Welding Bracket
• MIG/MAG welding torch
• Bulk Holder
• Welding mask
• Wire brush
• User manual in Polish
• Original packaging
• Warranty card for 12 months

Specifications