Suvirinimo aparatas INVERTER SYNERGY 200, 210A, MMA/TIG/MIG/FLUX

Trumpai apie prekę

Prekė: Suvirinimo aparatas INVERTER SYNERGY 200, 210A, MMA/TIG/MIG/FLUX. Kategorija: Elektrinių įrankių rinkiniai.

• Gamintojas: Majster Polska
• Modelis: MP0116

The most popular MIG inverter on the market, model MP-0116

⭐ MIG Flux ⭐ MMA ⭐ TIG-LIFT

✅ Composition of the set:

• Inverter welding machine MP-0116 210A
• DIN mass cable with clamp approx.210cm
• MMA welding cable DIN with electrode holder approx.210cm
• MIG grip
• Manual mask
• Brush with hammer for upholstery and cleaning of the sheath
• Welding angle
• Instruction manual in Polish

MAJSTER - Poland company constantly ensuring that the products are:

• Refined
• Failure-free
• Convenient
• Unrivaled

✅ Steel housing, maintaining high power IGBT transistors.

✅ The longest in this class COPPER wires, weight 2,1m and plus 2,1m (others offer 1.2 or 1,4m ) MiG holder 2m.

✅ Support - parts for products available in Poland Door To Door.

✅ DIGITAL display - readable parameters in all conditions.

✅ Synergy 210A - automatic selection of parameters depending on the chosen welding method

✅100% satisfaction or refund.

✅ Specification:

• Model: MP-0116
• Power supply voltage: 230V
• Frequency: 50Hz
• Rated input capacity: 3,7KVA
• Welding methods: FLUX - semi-automatic welding with self-shielding wire "without gas"
• Idle current voltage: 58V
• Work cycle: 60%
• Electrode range: 1,6-4 mm
• Wire diameter: 0.8 - 1,0 mm
• Wire spool weight: max 1kg
• Isolation class: F
• Degree of protection: IP21S
• MIG welding current: 35-210A
• MMA welding current: 20-210A
• TIG welding current: 15-210A
• Dimensions: 36dłx16szex28wys (cm)
• Weight: 5,2kg

Highest Quality Emergency Wire Feeder

✅ The feeder allows precise extension of the welding wire, excluding its slippage.

Works with wire with a diameter of 0,8 / 1,0mm.

MP-0116 is one of the most powerful welding machines available on the market in this price class! 100% INVERTER

✅ Welding cable length (-) MMA / MIG / TIG - SK25 9mm plug with increased cross-section to 2.1m length

✅ Length of welding wire (+) MMA - plug SK25 9mm with increased cross-section up to a length of 2,1m

✅ Length of MIG cable - 2m

⭐ EFFICIENCY and POWER - not comparable to others in this price segment

⭐ Every even the simplest INVERTER is incomparably BETTER than even the most expensive outdated transformer

✅ Description of Panel Elements

• (1) Current display
• (2) TIG indicator
• (3) MMA Indicator
• (4) Operating Mode Switch
• (5) MIG/TIG/MMA Current Adjustment
• (6) MIG/TIG negative polarity
• (7) MIG pistol connector
• (8) Positive polarity MIG/TIG
• (9) MIG Voltage Adjustment
• (10) MIG mode
• (11) Error signaling
• (12) Work signalling

✅ You do not need to be an experienced welder to bond this metal welding machine with a strong melt.

✅ The functions used in the most expensive IGBT welding machines are included in this device!

✅ It is not a problem to bond the material and show a nice superficial weld

✅ The trick is to bond the material with a large melt, nicely laid weld, practically spontaneously departing trail, which is a guarantee that the weld is clean, full, durable

✅ The MP welder has high parameters and all the functions that allow you to bond the material in this way!

FCAW method is arc welding with core wire (powder)

✅ This is a welding method similar to the MIG/MAG method, except that the wire inside is filled with flux or a chemical that produces protective gases during welding.

✅ FCAW welding combines the advantages of both wrapped electrode welding and MAG welding: very high efficiency (no need to change the electrode frequently) can also be welded outdoors (the flux also protects against weld oxidation) the welder does not have to have very high qualifications.

✅ It is designed for all kinds of welding work, in locksmith workshops, repair workshops, bodywork, farm, etc.

⭐ The current source was built on IGBT transistors providing a minimum of electromagnetic interference, small power losses in basic systems, enabling increase in efficiency and reliability of the current source, less consumption

The welding machine has the possibility of TIG welding after using the appropriate welding torch

✅ After its installation, the welding machine turns into a TIG welding machine while maintaining many parameters of expensive TIG devices.

HOT START

• ✅ Popularly called hot start, it allows by temporarily increasing the welding current above the value set by the welder.
• ✅ HOT START works at the moment of arcing and is designed to prevent the electrode from sticking to the material.
• ✅ It is a great convenience when lighting the electrode.

ANTI STICK

• ✅ Cuts off/minimizes welding voltage and current in case of short circuit of the electrode with the welded material.
• ✅ ANTI STICK allows the welder to detach the electrode more easily.

ARC FORCE

• ✅ Stabilizes the arc regardless of its length.
• ✅ Regulates welding arc dynamics.
• ✅ By reducing the value of the function, it gives a soft arc and a smaller depth of melt, while increasing the value of the function causes deeper melting and the possibility of welding with a short arc.
• ✅ At the highest value for the ARC FORCE function, it is possible to "press" the electrode into a lake of molten metal and burn the material through.

Specifications