Suvirinimo aparatas MIG MAGNUM 350A 400V, 3 viename

Trumpai apie prekę

Prekė: Suvirinimo aparatas MIG MAGNUM 350A 400V, 3 viename. Kategorija: Inverteriniai suvirinimo aparatai.

• Gamintojas: Magnum
• Modelis: Magnum MIG 358w MMA KWN-5

➖➖➖➖➖➖➖➖➖➖➖➖➖➖

The MAGNUM MIG 358W MMA IGBT is a mobile semi-automatic welding machine designed for welding using the following methods:

➡ MIG MAG in mode:

• MIG - arc welding with a hot melt electrode in an inert gas shield (argon, helium).
• MAG - arc welding with a hot melt electrode in the active gas shield (CO2, MIX).
• FLUX / FCAW - self-shielding wire welding.

➡ TIG

• TIG LIFT DC - welding with a non-melting electrode in an inert gas shield.

➡ MMA

• MMA - welding with wrapped electrodes (rutile, alkaline, acidic).

WELDING MACHINE MAGNUM MIG 358W MMA IGBT is used for welding:

✔ low alloy steels,

✔ low carbon steel,

✔ high alloy steels,

✔ stainless,

✔ acid-resistant,

✔ aluminium and its alloys,

✔ copper.

The welding machine is characterized by a wide range of applications, it is dedicated to all kinds of welding work in factories, industrial plants, locksmith workshops, repair workshops, etc.

⭐LUTOSPELING - is a method that is quite similar to MIG/MAG welding, but the energy supplied in this case is much less. This means that soldering is used to join thin sheets covered with a layer of zinc. The described method is a bonding process during which solder melts, not the material we work with.

⭐ MOBILITY OF THE DEVICE - The welding machine is equipped with a strong cylinder shelf, in addition, the chain holder ensures that the cylinder is firmly held in one place when moving the welding machine. The welder also has a chassis with 4 wheels, 2 front wheels are torsional making the welder very mobile.

⭐ TWO-BAR 2T - pressing the button initiates gas outflow and welding current, releasing the button turns off welding current and gas outflow

⭐ FOUR-BAR 4T - pressing and releasing the handle button initiates gas outflow and welding current, re-pressing and releasing the button turns off the welding current and gas outflow.

⭐ VERY HIGH EFFICIENCY - lower energy consumption, and high switching frequency, ensure rapid adjustment of the current to changes in parameters during welding.

⭐ STRONG METAL HOUSING - reduces the risk of damage to the welding machine.

⭐PROFESSIONAL WIRE FEEDER - enables precise extension of the welding wire excluding its slippage, guarantees stability and continuity of operation of the device.

⭐ EUROCONNECTOR - allows you to quickly change the handle and allows you to change the polarity for welding with self-shielding wire.

⭐INDUSTRY WORK - thanks to its high quality and multifunctionality, the device can be used in professional work.

⭐ CONTROL PANEL - The welding machine is equipped with an easy-to-use control panel and display, so it can be used even by amateurs.

The welding machine has an easy-to-use control panel on which it is located:

• Indication of overheating.
• Button of the test wire extension.
• Display numerical welding current in amperes.
• Display numerical voltage of welding current in volts.
• Button for selecting the welding method, MMA or MIG-MAG.
• Selection button: 2T bar, or 4T quadbar.
• Knob to adjust the wire feed speed.
• Knob for welding current regulation for MMA method.
• Knob of voltage regulation for MIG-MAG method.
• Knob of inductance regulation.

✔ REPAIR WORKSHOP

✔ LOCKSMITH WORKSHOP

✔ FACTORIES

✔ SHIPYARD

AND WHEREVER RELIABILITY MATTERS!

EFFICIENT OPERATION THANKS TO PROFESSIONAL WIRE FEEDER

The welder is equipped with a professional wire feeder, which guarantees stability and continuity of operation of the device.

The 4-roll feeder allows precise extension of the welding wire excluding its slippage.

By using a 4-roll feeder, the device ensures stable wire feeding so important when welding aluminum and copes very well with 5-meter welding handles.

The standard equipment of the welding machine includes rollers for the feeder 1,0-1,2mm and a second set of rollers 0,8-1,0 for aluminum.

Inductance adjustment allows optimization of arc characteristics depending on the thickness of the welded element and the welding method and conditions.

The function is useful during MIG/MAG welding of thin elements, preventing them from burning out and soldering galvanized elements.

The thinner the MIG/MAG welded element, the higher the inductance (soft arc - less melting), for thick elements vice versa (hard arch - greater melting).

The standard neutral inductance setting is in the middle of the scale.

Changing the inductance value also reduces the amount of welding chips during CO2 shielded welding.

The optimal setting of the inductance value depends on several factors and may differ from the standard recommendations, it should be selected during welding tests by manipulating the potentiometer knob.

THANKS TO THE INDUCTANCE ADJUSTMENT, THE WELDING MACHINE IS SUITABLE FOR SOLDERING

☀ VERSATILITY OF THE DEVICE ☀

Migomat company MAGNUM is a device with a wide range of applications, designed as an inverter power source enabling welding with hot melt wire in a gas shield MIG/MAG or FCAW self-shielding wire (after changing polarity), welding with a buffer electrode MMA, as well as the TIG Lift method

✔ MIG/MAG welding

Arc welding in gas shields is one of the most commonly used processes for the manufacture of welded structures. The semi-automatic welding process involves melting the edges of the welded object and the material of the hot melt electrode with the heat of an electric arc glowing between the electrode in the form of a solid wire and the welded detail, in an inert or active gas shield.

✔ Welding MMA

In the MMA method, a wrapped electrode is used, consisting of a metal core covered with a sheath. An electric arc is produced between the end of the electrode and the welded material. Arching is created by touching the end of the electrode to the welded material.

✔ Welding TIG LIFT DC

In the TIG (Tungsten Inert Gas) method, the electric arc is ignitioned in an inert gas (argon) shield between the welded element and the non-melting electrode, made of pure tungsten or tungsten with additives. In TIG DC Lift mode, the arc glow occurs when the electrode comes into contact with the welded element. In TIG DC mode, the current is constant.

❗❗ TIG method can be welded after connecting an additional handle, available at our auctions ❗❗

✔ Self-shielding wire welding FCAW

Thanks to the polarity change function, it is possible to weld without shielding gas, with FCAW self-shielding wire. The wire is designed for general production work, also in field conditions, and for welding structures that are not subject to impact requirements. Welding current DC(-).

Self-shielding powder wire fi 1,0mm/5kg E71T-GS is designed for welding ordinary carbon steels and increased strength not exceeding 510 MPa.

It is used in prefabrication, construction, tank production, agricultural equipment, etc. Used in both production and repair of equipment.

SELF-SHIELDED WIRE IS AVAILABLE SEPARATELY AT OUR AUCTIONS AND IN OTHER SETS

⭐ IGBT INVERTER TECHNOLOGY - is a modern technology based on bipolar transistors with an isolated gate. It combines the ease of control of field transistors with high breakdown voltage and switching speed of bipolar transistors. The use of IGBT technology has the effect of significantly extending the reliable operation of welding equipment.

⭐ GAS HEATER - socket for connecting a gas reducer with a heater to 36V, this prevents gas from freezing when setting a larger flow on the reducer.

⭐ THREE-PHASE POWER SUPPLY 3x400V - ensures stable operation of the device. The device is equipped with a power plug.

➡ The device is equipped with overload protection, which increases its reliability.

❄ The device has a fan cooling system which significantly increases its efficiency.

TECHNICAL DATA:

MIG/MAG WELDING PARAMETERS:

• MIG/MAG welding current: 50 - 350 [A]
• MIG/MAG welding voltage: 16,5 - 31,5 [V]
• Idle voltage: 56 [V]

WELDING PARAMETERS MMA:

• MMA welding current: 208 [A]
• Idle voltage: 56 [V]

TECHNICAL DATA:

• Power supply: AC 400 [V], 50/ [Hz],
• Security required: 20 [A] Class C
• Power consumption max.: 12,5 [kVA]
• Efficiency: 60 [%]
• Wire spool weight: max: 15 [kg]
• Wire diameter:/0,8/0,9/1,0/1,2 [mm]
• Housing protection class: IP21S
• Weight: 44 [kg]

THE REMAINING:

WHEN YOU BUY FROM US, YOU WILL RECEIVE:

• WERSAW MAGNUM MIG 358W MMA IGBT
• WELDING CABLE MIG MB25 5m - 1 pcs.
• ELECTRODE CABLE MMA 3m - 1 pcs.
• MASS CABLE 3m - 1pc.
• INSTRUCTION FOR USE IN POLISH
• WARRANTY CARD

SET OF 1

Specifications