Suvirinimo aparatas SKANDI KRAFT TIG 220 AC/DC MMA, 200A, 230V, IGBT, impulsinis, aliuminiui

Trumpai apie prekę

Prekė: Suvirinimo aparatas SKANDI KRAFT TIG 220 AC/DC MMA, 200A, 230V, IGBT, impulsinis, aliuminiui. Kategorija: Inverteriniai suvirinimo aparatai.

• Gamintojas: SKANDI KRAFT
• Modelis: iTECH TIG 220 ACDC

Manufacturer: SKANDI KRAFT ║ Welding methods: TIG AC/DC, PULS, MMA ║ Power supply: 230V ║ Welding current: 200A ║ Efficiency: 40%

CHECK OUT ALL THE ADVANTAGES OF THE LATEST SKANDI KRAFT iTECH TIG 220 AC DC WELDING MACHINE

• The iTECH series - excellent and high quality!
• Improved version - LCD DISPLAY
• Polish
• IGBT transistors of the latest generation
• Small size and weight
• Adjustment of wave frequency AC
• Selection of AC waveform
• Rectangular wave, sinusoidal, triangular, rising, falling, trapezoidal
• Full panel control type "ladder"
• Additional Features: PULS, SPOT, BI-LEVEL, AC WAVE FORM
• Powerful handle with remote control and laminar lens included.
• Modern and proven production
• Welding materials up to 10 mm thick
• Ideal for welding: aluminium, steel, copper alloys and other weldable materials
• Universal - will work in any workshop.
• Possibility of connecting remote control pedal
• HF and LIFT

The SKANDI KRAFT iTECH TIG 220 AC DC welder is equipped in addition to the manual mode w synergic mode (AUTO mode). Thanks to this, novice TIG welding machines will be able to start their adventure with welding with this method much easier. To start the welding process in AUTO (synergic) mode, only two parameters must be provided and the device will tune all functions automatically.

1. Material Type Selection: In the first step, the user can choose from different types of materials, such as black steel, stainless steel, or aluminum.
2. Setting the Thickness of the Welded Material: The next step is to determine the thickness of the welded material.

After selecting both of these parameters, the device is ready for welding.

SPOT WELDING - COLD WELDING

It is a variant of spot welding, it enables welding thin elements, thanks to very low heat emission in the joining zone.

SIMPLE AND EFFECTIVE WORKING METHOD

It consists in cyclic short-term ignition and extinction of the arch. Welding occurs in continuous mode, pressing the button in the handle will start cyclic arcing and extinguishing, releasing the button will finish welding.

SKANDI KRAFT iTECH TIG 220 AC/DC – Cooling System NorthernWind

SKANDI KRAFT iTECH TIG 220 AC/DC is equipped with an innovative cooling system called NorthernWind, which optimized air flow through the cooling chamber. This advanced mechanism ensures effective temperature regulation of internal components, which significantly prolongs their life, durability and increases the efficiency of the work cycle.

Selection of AC and DC welding mode (AC - AC welding mode, for welding aluminum alloys, DC - DC welding mode, for welding black steel, stainless steel (chromo-nickel) and other materials. )

It has the ability to choose 6 AC waveforms (rectangular, sinusoidal, triangular, front triangular wave, rear triangular wave, trapezoidal):

• Rectangular - loud and efficient in the process of welding thick aluminum alloy elements.
• Sinusoidal - gentle and ensuring smooth arc guidance for both thick and thin materials.
• Triangle - suitable for welding thin materials due to the short base current time.
• Front/Rear triangular wave - an original option that allows the use of a triangular wave in a larger range.
• Trapezium - hybrid wave, a combination of sinusoidal and rectangular.

• PULS - Pulse welding not only allows for better weld quality, but also allows for welding in various positions and welding of very thin elements. Reducing the linear energy of the arc, and thus reducing overheating or burnout of welded materials.
• PUNKT - for making equal, point strains, with adjustable welding time. Mainly used for joining sheet metal "on tab" or pre-connection of structures.
• BI-LEVEL - allowing you to switch between two different welding current values, without interrupting operation. The change is done by quickly pressing the button on the handle. Useful for continuous welds on materials of variable thickness and when there is a need to increase or decrease the welding current without extinguishing the arc. Functions often used for welding aluminum, for greater temperature control of the material. Available for TIG DC and AC without Pulse
• HF - the device is equipped with an ionizer that allows contactless viewing of the welding arc. using high frequencies. Thanks to this technological solution, it is possible to eliminate weld contamination with tungsten.
• AC WAVEFORM CHANGE: for even better welding parameters for a specific material, the welding machine offers the selection of the appropriate waveform.
• MEMORY SETTINGS - Programmable memory channels to save your own programs.

The TIG 4m holder is equipped with a laminar lens.

Laminar lens significantly improves the welding process by focusing the shielding gas stream. With this solution, the TIG gas lens welding machine offers users the following benefits:

• Reduction of Gas Consumption: The lens in the holder effectively focuses shielding gas on the welding area, which allows you to reduce overall gas consumption. It is not only an economical but also an ecological solution that minimizes gas emissions into the atmosphere.
• Improvement of Weld Quality: The concentrated shielding gas stream allows for better protection of the welded metal against atmospheric influences. Thanks to this, the welds are cleaner and free from inclusions or pores, which translates into higher quality and aesthetics of the weld.
• Increased Welding Arch Stability: The use of a gas lens in the TIG holder promotes the stabilization of the welding arc. The stable arc allows for more even welding, which is crucial in achieving precise and even welds.
• Longer Life of the Handle and Accessories: Focusing shielding gas reduces the risk of overheating and damage to both the handle and consumables such as nozzles and electrodes. As a result, these components require less frequent replacement, which reduces equipment maintenance costs.

Standard TIG 4m handle is equipped with a flexible pipe of the "Flex" burner thanks to its flexible design, facilitates welding in hard-to-reach places.

Advantages of the "Flex" Burner:

• Flexibility: The flexible snorkel allows you to maneuver the burner freely, increasing the availability and comfort of use.
• Precision: Allows clean and accurate welds to be made, even in complex and tight spaces.
• Comfort: Lightweight and ergonomic design minimizes welder fatigue, allowing long-term work without discomfort.
• Strength: Made of high-quality materials, the "Flex" burner is resistant to damage and ensures long-lasting use.

The device is equipped with a system protecting the welding machine against overheating. If the safe temperature is exceeded, the work will be interrupted and a warning message and an audible signal will appear on the display, which allows for quick response and protects the device from damage.

• Welding machine SKANDI KRAFT iTECH TIG 220 AC/DC
• TIG SR26 Flex 4 meters
• Mass holder fully copper 3 meters,
• Copper electrode holder 3 meters
• Laminar gas lenses 3 pcs.
• Tungsten electrodes 3 pcs.
• Stoppers for handle 3 pcs.
• Terminal bushings (1.6;2.0;2.4 [mm])
• Lens insulator 3 pcs
• ceramic nozzle "8" 3 pcs
• Instructions.

Elements for mounting a gas cylinder:

• Clamp band 2 pcs.
• gas hose 2 meters
• key,
• Allen

POWER SUPPLY PARAMETERS:

• Power supply: 230 V
• Frequency: 50/60 Hz
• Idle Voltage: 65 V
• Network security: 20 A

TECHNICAL PARAMETERS

TIG efficiency (for temp. 40°C):

• 40%/200 A/18 V
• 60%/163 A/16.5 V
• 100%/126 A/15 V
• TIG welding current: 10*-200 A
• TIG welding voltage: 10.4-18 V

• PRE GAS: 0-10 [s]
• welding start current START AMP: 10-200 [A]
• current build-up time UP SLOPE: 0-15 [s]
• peak current PEAK AMP: 10-200 [A]
• pulse cycle: 5-95 [%]
• Pulse frequency: 1-200 [Hz]
• Pulse Balance: 5-95 [%]
• base current: 10-95 [A]
• DOWN SLOPE: 0-25 [s]
• final current: 10-200 [A]
• gas outflow after POST GAS process: 1-10 [s]
• AC current frequency: 40-200 [Hz]
• AC current balance: 10-90 [%]

*average parameter min. current 19 [A]

Specifications