Suvirinimo aparatas WELDER SHERMAN DIGIMIG 200 HIT SPOT 4in1 MIG

Trumpai apie prekę

Prekė: Suvirinimo aparatas WELDER SHERMAN DIGIMIG 200 HIT SPOT 4in1 MIG. Kategorija: Pusiau automatiniai suvirinimo aparatai.

• Gamintojas: Sherman
• Modelis: Sherman DIGIMIG 200 HIT

⚡ You weld 200 A from a household outlet, and the parameters set synergy ⚡

You unpack, plug in the handle and weld. In synergic mode, you specify the material and diameter of the wire, and the device selects the voltage and speed of the wire feeding itself. The device combines four methods: MIG/MAG in gas shield, FLUX with self-shielding wire without cylinder, MMA with wrapped electrode and TIG Lift.

⚙ Technical data

• ✅ Power supply: AC 230 V, 50 Hz, single phase, protection 25 A

• ✅ Power consumption: MIG/MAG 4,8 kVA, MMA 4,9 kVA, TIG 3,6 kVA

• ✅ Welding current: MIG/MAG 200 A, MMA 180 A, TIG 200 A

• ✅ Work cycle: 60% in each method

• ✅ MIG welding voltage: 15,5-24 V, idle 65 V

• ✅ Wire feeding: 2-14 m/min, 2-roll metal feeder

• ✅ Wire diameter: 0,6-1,0 mm, 100 mm and 200 mm spools

• ✅ Point welding MIG: 0,1-20 s, wire burning 0-10 s

• ✅ Current sockets: 35/50, protection degree IP21, fan cooling

• ✅ Technology: IGBT, digital control, LED display

• ✅ Dimensions: 43,6 x 21,5 x 32,4 cm, weight 10,3 kg

🏷 Nameplate – parameters on the device

All data is stamped on the housing, not only in the description – you can compare it before the first welding.

• ✅ Model DIGIMIG 200 HIT, standard EN IEC 60974-1

• ✅ Power supply 230 V, 50 Hz, protection degree IP21

• ✅ Operating cycles and currents for each method – MIG/MAG, MMA and TIG

🎛 Panel and functions

• ✅ Synergic programs – carbon steel, aluminium, self-shielding wire

• ✅ SPOT – spot welding with a repeatable time of 0,1-20 s, for thin sheets

• ✅ 2T/4T – short weld with button or long without holding

• ✅ Inductance adjustment – soft or hard arc, depending on the material

• ✅ Hot Start and Arc Force – some glow and stable arc at the electrode

• ✅ VRD – reduced idle voltage

• ✅ Gas Test and quick wire extension – preparation for work without wasting gas

• ✅ Lutowelding – thin and galvanized elements without burning

• ✅ Spool Gun option – aluminium with feeder in handle

SEE THE VIDEO PRESENTATION OF THE DEVICE

➡ Paste into browser: https://youtu.be/r0lKxCMYMu4

Video presentation of the manufacturer. The video shows the panel, feeder compartment and operation of the device.

📏 What goes into the feeder

• ✅ metal feeder, 2-roll – leads the wire evenly, without slipping

• ✅ 0,6-1,0 mm wire – steel, aluminium or self-shielding wire

• ✅ 100 mm and 200 mm spools

• ✅ Feeding speed 2-14 m/min, wire burning time 0-10 s

🔦 Illumination of the feeder chamber

There is a lamp in the chamber with the LIGHTING ON/OFF switch – you put on a spool and thread the wire without shining your phone.

• 🔦 Light switch right next to the feeder mechanism

• ✅ Metal feeder 2-roll, spools 100 mm and 200 mm

• ✅ On the inside of the flap there is a parameter selection table – pulls when changing the material

🔩 Close-up wire feeding mechanism

• ✅ Guide and drive roller – hence the wire goes to the handle

• ✅ Wire diameter 0,6-1,0 mm, feed speed 2-14 m/min

• ✅ Quick wire extension pushes it through without arcing

🧰 Feeder chamber from the inside

• ✅ Metal 2-roll feeder – leads the wire evenly, without slipping on the roll

• ✅ 100 mm and 200 mm spools enter without modifications

• ✅ You adjust the roller pressure with a knob – thinner wire needs less pressure

🔌 Two handles included – MIG/MAG and MMA

There are two handles in the carton, which is two methods ready immediately. The mass cable is not the third method – it closes the current circuit and is needed for each of them.

• 🔥 MIG/MAG MB15 holder – 3 m – for wire welding: in cylinder gas shield (MIG/MAG) and self-shielding wire (FLUX)

• ⚡ Electrode holder – 2 m – for wrapped electrode welding (MMA)

• 🔗 Mass cable with clamp – 2 m – is not used for welding, but closes the circuit; a certain contact is a condition for a stable arc

• 🔩 TIG Lift device supports, but TIG handle needs to be purchased – it is not included in this set

• ✅ 35/50 sockets – market standard, accessories can be purchased in any welding shop

🔧 Connections and cooling

• 🔌 Gas connector on the back panel – you plug the hose from the reducer in here when you weld in the gas shield

• ⚡ ON/OFF power switch and device nameplate

• 💨 Fan cooling, protection level IP21

🔌 Gas switch and connector

• ⚡ ON/OFF power switch on the back panel

• 🔌 Gas connector – here you plug the hose from the reducer when you weld in the gas shield

• 💨 Fan cooling, protection level IP21

🛡 Anti-chipping preparation 400 ml – free

• ✅ Protects burner nozzle, tools and welded surfaces from metal chipping melting

• 🔥 Does not affect the welding process and does not cause defects in welds

• 🔧 Silicone and freon free, capacity 400 ml

🎯 What work

• 🔧 Workshop and garage – constructions, profiles, repairs

• 🚗 Blacharka – thin sheets, spot welding instead of welding

• 🏡 Farm and land – gates, trailers, machinery

• 🎓 Learning to weld – synergy allows you to start without setting parameters

📦 What goes in the package

• ✅ Sherman DIGIMIG 200 HIT welding machine – 1 pc.

• ✅ MB15 welding torch – 3 m

• ✅ Electrode holder – 2 m

• ✅ Mass cable with clamp – 2 m

• ✅ User manual in Polish and warranty card

• ✅ Anti-chipping preparation 400 ml – free

🔎 Compare offers before you buy

The same welding machine is sometimes sold in different sets. Check out these points in each listing you compare.

• 🔌 How many handles are included? Here you get MIG/MAG handle MB15 3 m, electrode handle 2 m and mass cable 2 m – MIG/MAG, FLUX and MMA without buying accessories.

• ⚙ What is the wire feeder? Metal, 2-roll – leads the wire evenly and without slipping.

• 🔦 Does the feeder compartment have lighting? It has its own lamp with LIGHTING ON/OFF switch – you can also put the spool in a dark corner of the workshop.

• 🛡 What do you get above the device itself? Anti-chipping preparation 400 ml included in the price – the nozzle stays clean longer.

❓ Technical questions

Is there a gas cylinder included?

✅ No. The welder works in a gas shield when you connect your own cylinder, or using the FLUX method with self-shielding wire without gas.

What wire goes into the feeder?

✅ Wire 0,6-1,0 mm, on spools 100 mm and 200 mm.

Can the welding machine handle aluminum?

✅ Yes, it has a synergistic program for aluminum and a Spool Gun option.

What installation security is needed?

✅ 25 A, single-phase power supply 230 V.

How long can I weld continuously?

✅ Operating cycle 60% – six minutes per ten at full current.

Specifications