Suvirinimo inverteris MAGNUM SNAKE 200LED 230V

Trumpai apie prekę

Prekė: Suvirinimo inverteris MAGNUM SNAKE 200LED 230V. Kategorija: Inverteriniai suvirinimo aparatai.

• Gamintojas: Magnum
• Modelis: Snake 200LED

INVERTER WELDING MACHINE SNAKE 200LED 230V MAGNUM

✅INVERTER WELDING MACHINE✅SNAKE 200LED✅230V✅MAGNUM✅

| RELIABLE | ACCURATE | PRACTICAL | UNIQUE |

⭐ TOP QUALITY⭐

• The SNAKE 200 LED welding machine is designed to work in stationary and off-road conditions, perform all kinds of workshop, repair, construction work, etc. The welder can also be used for TIG welding with a special TIG handle with valve. Arch ignition is then carried out by lightly rubbing the non-melting electrode against the welded material.
• The SNAKE 200 LED by MAGNUM is a lightweight, portable power source made in inverter technology. The device is powered by a single-phase 230V network, has a maximum welding current of 200 A and high efficiency of 60% . The welder is equipped with a large multifunctional, intuitive LED display.
• The device is based on advanced technology, using IGBT transistors, which translates into reduced electromagnetic interference, low power losses, increased efficiency and reliability of the power source and lower energy consumption. The device is equipped with HOT START function, ARC FORCE, ANTI STICK, VRD. This makes arcing and electrode guidance extremely easy, even for welders without any experience.

✔ Adjustable ARC FORCE function - "arch dynamics" - shortening the arc length is accompanied by an increase in welding current, which stabilizes the arc, regardless of its length. Reducing the value of the function gives a soft arc and a smaller depth of melt, while increasing the value of the function causes deeper melting and the possibility of welding with a short arc.

✔ Adjustable HOT START function - consisting in temporarily increasing the welding current above the set value at the moment of arcing, This prevents the phenomenon of "sticking" the electrode in the initial phase of welding, making it easier to start the whole process.

✔ ANTI STICK function - short-circuit function.

✔ VRD (Voltage Reduction Device) function - it turns off the power supply within milliseconds after welding and reduces the voltage on the wrapped electrode to a safe level.

• Power supply: 230 V / 50 Hz
• Welding current range: 30 - 200 A
• Idle voltage: 70 V
• Diameter of electrode: 1.6 - 4.0 mm
• Cooling: Air
• Power protection: 20 A
• Housing protection: IP21
• 230 V network security: 20 A
• Minimum TIG welding current: 30 A
• Maximum TIG welding current: 200 A
• Minimum MMA welding current: 30 A
• Maximum MMA welding current: 200 A
• TIG duty cycle: 60%
• MMA work cycle: 60%
• Welding processes: MMA / TIG
• VRD function: YES
• Hot Start function: YES
• Arc Force function: YES
• Anti Stick function: YES
• Weight: 4,7 kg

Specifications