Suvirinimo inverteris MIG/MMA/TIG LIFT 250A su LCD

Trumpai apie prekę

Prekė: Suvirinimo inverteris MIG/MMA/TIG LIFT 250A su LCD. Kategorija: Invertoriniai suvirinimo aparatai.

• Gamintojas: Kraft&Dele
• Modelis: KD1882

---------------------------------------------------------------------------------

Every even the simplest INVERTER is incomparably BETTER than even the most expensive outdated transformer

Here we are dealing with a proven device, improved for years, we invite you to read customer reviews about the product

---------------------------------------------------------------------------------

The main advantages of inverters:

• high EFFICIENCY
• low energy consumption
• ability to work on extension cords and fuses
• low weight
• high quality of the weld
• possibility of working with power generators
• Settings and automatic functions for improved working comfort
• possibility of MIG, MMA, TIG welding after using accessories

The KRAFT&DELE series device is a semi-automatic welding machine designed for manual, electric welding of steel in gas shielding, MIG, MMA, as well as TIG LIFT method.

The power source was built on IGBT transistors providing minimum electromagnetic interference, small power losses in basic circuits, enabling increase in efficiency and reliabilityand power source, less consumption

Model: KD1882

• Input Voltage: 230V
• Frequency: 50Hz
• Throughput: 6,3VVA
• Welding methods: MIG, MMA, TIG LIFT
• Voltage without load: 62V
• MIG wire diameter: 0,8 / 0,9 / 1,0 / 1,2 mm
• MMA electrode diameter: 1,6 - 5,0 mm
• Working cycle: 60%
• MIG welding current: 30-250A
• MMA welding current: 20-250A
• TIG welding current: 15-220A
• Wire feed speed: 2 - 13 m/mim
• Insulation Class: H
• Weight: 8kg

The advanced control panel allows for smooth control of operating parameters.

Comfortable and very readable potentiometers allow you to change welding parameters even with gloves on.

HOT START

Popularly called hot start, it allows by temporarily increasing the welding current above the value set by the welder. HOT START works at the moment of arcing and is designed to prevent the electrode from sticking to the material. It is a great convenience when lighting the electrode.

ANTI STICK

cuts/minimizes welding voltage and current in case of short circuit of the electrode with the welded material. ANTI STICK enables the welder to detach the electrode more easily.

ARC FORCE

stabilizes the arch regardless of its length. Regulates the dynamics of the welding arc. By reducing the value of the function, it gives a soft arc and a smaller depth of melt, while increasing the value of the function causes deeper melting and the possibility of welding with a short arc. At the highest value for the ARC FORCE function, it is possible to "press the electrode into a lake of molten metal and burn the material through.

MIG welding

It consists in melting the edges of the welded object and the material of the hot melt electrode with the heat of an electric arc glowing between the electrode in the form of a solid wire.

Advantages:

• universal method - you can weld various metals and their alloys
• high welding efficiency - much higher than wrapped electrodes,
• Relatively low cost of welding materials
• good quality of welds

MMA welding

A wrapped electrode is used, which consists of a metal core covered with a compressed sheath (rutile, alkaline, acidic)

Advantages:

• the possibility of welding various types and grades of metals and alloys: non-alloy and alloy steels, cast iron, nickel, copper and its alloys;
• possibility of welding in any position, in field conditions
• high quality welds, good mechanical properties;
• possibility of welding thin and thick elements

TIG LIFT welding

The process of welding with an unusual electrode in the shield of the covered gas, used for welding alloy metals (not suitable for welding aluminum). It is a method that allows to obtain the highest quality welds.

Advantages:

• best of all welding methods connection quality
• welding of elements with a wide range of thicknesses (the only method for welding and welding artistic details below 1 mm thick; only in impulse mode with a guide arc used for better targeting in place of the weld)

COMPOSITION OF THE SET:

• KD1882 250A welding machine
• MMA DIN welding cable with electrode holder
• Semi-automatic MIG cable
• DIN mass cable with clamp
• Protective shield with glass
• Brush with hammer
• User manual in Polish
• Original packaging

Specifications