Taškinio suvirinimo aparatas Fnirsi SWM-10 akumuliatorių celėms + 5 m nikeliuota juostelė

Trumpai apie prekę

Prekė: Taškinio suvirinimo aparatas Fnirsi SWM-10 akumuliatorių celėms + 5 m nikeliuota juostelė. Kategorija: Inverteriniai suvirinimo aparatai.

• Gamintojas: Fnirsi
• Modelis: SWM-10

Fnirsi SWM-10 is a compact size intelligent spot welding machine for permanent connection of packages 18650, 21700 or other types of cells. This device has two integrated high-current lithium batteries with a total capacity of 5 000 mAh. In combination with an advanced electronic system, they enable the generation of welding charge with an intensity of up to 1200 A. Thanks to this, the Fnirsi SWM-10 spot welding machine can be used not only for workshop applications, but also for field work.

The Fnirsi SWM-10 welding machine is facilitated by a color screen with a diagonal of 1,8 inches. It can read all the most important parameters of the device, such as the voltage of the integrated battery, the current temperature of the welding machine, the length of welding pulses and the intervals between individual pulses. The welding machine screen also displays the amount of remaining current in the form of a 10-position strip. In the lower right corner of the display, you can also find an alarm icon informing the user about too low battery charge status, overheating of the device or short circuit occurrence.

Thanks to the use of advanced integrated circuits Fnirsi SWM-10 automatically detects the application of wires to the welded element, and then after the predetermined time (default 0,8 s) begins welding. The user can also choose the number of welding pulses triggered after applying wires in the range from 1 to 5. Adjustment of parameters Fnirsi SWM-10 is done through 3 buttons located on the front of the housing.

The device is also equipped with a self-off function when idle is detected, which saves battery life. By default, it is 60 minutes, but this time can be adjusted to the individual preferences of the user. Fnirsi SWM-10 can be charged via USB-C port. Interestingly, the device is also equipped with a USB type A port, with which you can charge other smart devices.

The Fnirsi SWM-10 intelligent spot welding machine can permanently connect strips made of nickel, iron sheet, aluminum and thin stainless steel. The maximum belt thickness is 0,25 mm. Strips of this thickness can also be permanently attached to the poles of lithium-ion, lithium-iron-phosphate cells and other popular types of cylindrical cells. This will enable the construction of extensive packages for scooters and electric bicycles, batteries used in laptops and all kinds of other batteries powering electronic devices.

Specification:

• 1,8 inch color display;
• Temperature sensor;
• Maximum charging/discharge current: 5 V at 2,1 A;
• Possibility of welding nickel, iron, aluminum and stainless steel strips;
• Thickness of the welded material: from 0,1 to 0,25 mm;
• Maximum current of 1 200 A;
• Built-in lithium battery with a capacity of 5 000 mAh;
• Automatic shutdown function in case of inactivity;
• USB interface for charging the welding machine;
• Possibility of using the welding machine as a powerbank;
• Dimensions: 155 mm x 82 mm x 28 mm;

Included with the SWM-10 welding machine is a USB Type-C cable, two welding wires, a Robot sticker with the Elektroweb logo, a set of nickel strips, spare welding tips and an instruction manual in Polish (downloadable from the store).

Spot welding machine for FNIRSI SWM-10 cells + 5m nickel-plated tape

Specifications