Taškų suvirinimo aparatas Telwin Digital Puller 5500, 230V, priedai

Trumpai apie prekę

Prekė: Taškų suvirinimo aparatas Telwin Digital Puller 5500, 230V, priedai. Kategorija: Sandarikliai.

• Gamintojas: Telwin
• Modelis: Zgrzewarka do blach z akcesoriami 230V
• Įtampa: 230 V

➡ Resistance welding machine for industrial and professional use

☑ Included:

• ➡ Welding machine Telwin Digital Puller 5500 230V
• ⭐ Gun automatic without trigger
• ⭐ Bulk cable with fast mass
• ⭐ Inertial hammer with star holder
• ⭐ Stars - 5pcs
• ⭐ Straight bits copper 1,5 - 100pcs.
• ⭐ Twisted bits copper 1,5mm - 100pcs.
• ⭐ Electrodes for bubble - 3pcs.
• ⭐ Electrode for bit 16mm
• ⭐ Corrugated wire 2.0mm - 25pcs.
• ⭐ Electrode for corrugated wire
• ⭐ Claw 8 hook 3mm
• ⭐ Pads for welding machine - 100pcs.
• ⭐ Electrode for pads 10mm

☑ Spot welding machine for resistance welding – a durable device for industrial and workshop applications.

➡ Resistant to harsh conditions, recommended for both bodywork, sheet metal and varnishing services as well as for DIYers.

➡ The basic tool of the bodywork machine – reliable, Italian quality valued in the automotive industry.

➡ Portable resistance welding machine (point welding machine) with microprocessor controller digital. The device allows you to perform numerous types of hot and point machining on sheets that are specific for the automotive sector and those sectors where there are analogous types of sheet metal.

☑ The main parameters of the device are as follows:

• ⭐ automatic setting of welding parameters
• ⭐ the ability to change the welding time in relation to the value set in automatic mode
• ⭐ limitation of line overcurrent after turning on the device
• ⭐ backlit liquid crystal display for displaying commands and set parameters

☑ Spot welding machine can be used for welding low carbon iron sheets and galvanized iron sheets.

Description of the photo:

• 1 Cable leading to the gun: 2.5m
• 2 Cable mass: 1.5m
• 3 Power cable with plug: 3.5m
• 4 Handle with scoring mass

Technical data:

• ⭐ Rated supply voltage: 230V
• ⭐ Power cord thickness: 3G 2,5mm2
• ⭐ Network frequency: 50/60Hz
• ⭐ Maximum welding current: 3800A
• ⭐ Sterile secondary voltage: 5.6V
• ⭐ Maximum power: 10.5kW
• ⭐ Rated Power: 1.8kW 50%
• ⭐ Network Fuse: 16A
• ⭐ Power factor: 0.8
• ⭐ Working cycle: 1.5%
• ⭐ Degree of protection: IP22

Display - Instructions:

• A. Multifunction Button

  - ⭐ "START" activates the device for the first use.

  - ⭐ "MODE" selects the program for the tool being used, from H to K.

  - ⭐ "UNIT SELECTION" – press and hold the button for 3 seconds to set the sheet metal thickness unit: [mm], [in], [ga].

• B. Decreases sheet metal thickness, welding time, and power.
• C. Increases sheet metal thickness, welding time, and power.
• D. Liquid Crystal Display (LCD).
• E. "START" Indicator: Signals to press the "MODE" button to activate the device for operation.
• F. Displays the selected program, sheet metal thickness, or an alarm code (explained further in the user manual).
• G. "Studder" Gun without trigger (activates by contact with the workpiece).
• H. Spot welding of studs, rivets, washers, eye washers, triangles.
• I. Welding of studs/rivets with a diameter of 4-6mm.
• J. Using the "bumping" electrode.
• K. Using the "pushing" electrode.
• L. Indicates the welding time level relative to the automatically set value.
• M. Activates with the "Studder" gun.
• N. Indicates that the pliers are in use.
• O. Represents the thickness of the sheet metal being welded.
• P. Indicates that the device is in thermal protection mode.
• Q. Displays the measurement unit: [mm], [in], [ga].

Safety Recommendations:

• ⭐ Secure the two welding cables together as closely as possible.
• ⭐ Keep your head and torso as far as possible from the spot welding circuit.
• ⭐ Never wrap welding cables around yourself.
• ⭐ Do not make spot welds while within the range of the welding circuit. Ensure both cables are on the same side.
• ⭐ Connect the spot welding ground cable to the workpiece being welded, as close as possible to the weld location.
• ⭐ Do not perform spot welds near the spot welder; do not sit or lean on it during operation (minimum distance: 50cm).
• ⭐ Do not leave ferromagnetic objects (which generate a magnetic field) near the spot welding circuit.

See the Telwin 5500 230v welding machine in the video:

Copy the link and paste into your browser window

Gun with brass electrode holder

• 1 Electrode holder for electrodes Ø10/16mm
• 2 Automatic pistol
• 3 Pistol grip
• 4 Holder for hanging

Description of accessories below

Inertial hammer:

☑ Used for removal of dents of both small body dents and larger ones.

• ⭐ Tip: handle for triangles / stars spotter

Claw thickness is 3mm

☑ Dimensions of internal threads:

• ⭐ One thread M14
• ⭐ Second thread M10 deeper in the claw holder

This is a universal claw for any spotter welding machine.

Electrode for bits (OT pad) Spotter.

☑ The electrode has an elastic band holding the bit for convenience.

Dimensions:

• ⭐ Handle: 16mm

Straight bits:

☑ Bits with copper coating have better conductivity heat and electric so that the welding machine needs less power to heat the bit, which results in - no spark when burning the sheet around the weld and the sheet does not overheat at the place of the weld inside out. Thanks to this, we avoid future corrosion of the sheet metal from the other inside:

• ⭐ 100pcs.
• ⭐ Thickness: 1.5mm
• ⭐ Length: 55mm
• ⭐ Mesh width: 22mm(ex. ), 10mm(in. )
• ⭐ Handle Width: 9mm

Twisted bits:

• ⭐ 100pcs.
• ⭐ Thickness: 1.6mm
• ⭐ Length: 55mm
• ⭐ Mesh width: 22mm(ex. ), 10mm(in. )
• ⭐ Handle Width: 9mm

Corrugated wire

☑ Corrugated wire for heating with electrode, is used to pull out dents with claw, claw (comb) 6 / 8-hook.

• Wire with copper coating has better conductivity heat and electric so that the welding machine needs less power to heat the wire!

Technical data:

• ⭐ Length: 320mm
• ⭐ Thickness: 2,0mm
• ⭐ Height: 10mm
• ⭐ Package quantity: 25 pieces

Electrode for corrugated wire

☑ Electrode for accurate heating of corrugated wire to the sheet metal surface using spotter or welder.

☑ Technical data:

• ⭐ Electrode diameter: 10mm
• ⭐ Length: 80mm
• 1 Special grooves for convenient work
• 2 Made of special copper alloy

Washers for spotter welding machine 100pcs.

☑ Thanks to the copper coating used in pads, we use their maximum efficiency ensuring good bonding moreover, we will not overheat the sheets from the internal side and around the weld.

• ⭐ Diameter: 16mm (ex. ) 8mm (in. )
• ⭐ Thickness: 1.6mm

Electrode for washers

☑ Brass electrode for heating spotter pads with magnet for convenience of work.

• ⭐ Handle diameter: 10mm
• ⭐ Electrode length: 65mm

Electrode for bubble, shrinking sheet metal.

➡ We mount it to the handle from the spotter welding machine (where the hammer passes), heat the tip, then drawing with a "screw" on the surface of the sheet metal pull and harden it.

➡ The electrode is also used for shrinking sheet metal. It is used for point heating of the deformed place. Thanks to the precise action, the electrode helps in eliminating stress and restoring the sheet surface to its original shape. It is ideal for repairing dents and deformation in processes requiring accuracy and high temperature resistance.

• ⭐ Length: 305mm
• ⭐ Diameter: 10mm

☑ Included:

• ➡ Welding machine Telwin Digital Puller 5500 230V
• ⭐ Gun automatic without trigger
• ⭐ Bulk cable with fast mass
• ⭐ Inertial hammer with star holder
• ⭐ Stars - 5pcs
• ⭐ Straight bits copper 1,5 - 100pcs.
• ⭐ Twisted bits copper 1,5mm - 100pcs.
• ⭐ Electrodes for bubble - 3pcs.
• ⭐ Electrode for bit 16mm
• ⭐ Corrugated wire 2.0mm - 25pcs.
• ⭐ Electrode for corrugated wire
• ⭐ Claw 8 hook 3mm
• ⭐ Pads for welding machine - 100pcs.
• ⭐ Electrode for pads 10mm

Specifications