Teleskopinis metalinis piktžolių ravėtuvas

Trumpai apie prekę

Prekė: Teleskopinis metalinis piktžolių ravėtuvas. Kategorija: Piktžolių ravėtuvai.

• Gamintojas: Shark Tools
• Modelis: Wyrywacz do chwastów teleskopowy SHARK TOOLS

The Shark Tools weed picker is a practical garden tool for mechanical weed removal together with the root. It will work on the lawn, rebates, plot, by the paths and in places where you want to remove individual weeds without using chemicals.

The adjustable length of the handle 100 – 116 cm allows you to work in an upright position, without frequent bending, kneeling and straining the back. Steel claws dig into the ground around the weed, grab the root, and a movable trigger makes it easy to quickly eject the removed plant from the head.

✅ Removes weeds with root – helps reduce their rapid regrowth

✅ Work without bending – comfortable weeding in a standing position

✅ Adjustable length 100 – 116 cm – adjustment to the height of the user

✅ Steel claws – dig into the ground and grab the plant at the root

✅ Moveable trigger – easy emptying of the head after pulling out the weed

✅ Folding leg – helps to drive the tool into the ground and facilitates storage

✅ Anti-slip handle – more secure grip during operation

✅ Precise removal of individual weeds – good for lawn and rebate

✅ Without chemistry – mechanical removal of weeds from the garden

✅ Claw cover – safer tool storage

Removing weeds along with the root

The Shark Tools picker is designed to remove weeds from the root, not just trim them to the surface of the ground. Claws dig into the substrate around the plant, grab it at the root and allow you to pull the weed out of the ground. This is especially useful for dandelion, grandmother, thistles and other weeds with a stronger root system.

Working without bending down and kneeling

The long, adjustable handle allows you to work in a standing position. This makes weed removal more convenient than manual weeding, especially with more weeds on your lawn or plot. This is a good solution for people who want to reduce the load on their back and knees while working in the garden.

Adjustable length 100 – 116 cm

The cap can be adjusted in the range of 100 – 116 cm, which makes it easier to set the tool for the height of the user and the type of work performed. A shorter setting can be comfortable with precise plucking, and longer when working on a larger surface.

Steel claws for catching weed

The head is equipped with claws, which when driven into the ground include the weed and its root. This design allows you to precisely target individual plants without over-infringing the lawn or plants growing next door.

Folding auxiliary leg

The leg makes it easy to press the tool to the ground and drive the claws into the ground. It also helps to pry the weed when plucking. When finished, the foldable design makes it easy to store the tool in your garage, gazebo or garden storage.

Movable trigger for emptying the head

After pulling out the weed, you do not need to pull it out by hand from the claws. The movable trigger allows you to easily pull the weed out of the head, e.g. directly into a bucket, bag or composter. This speeds up work and limits hand-to-ground contact.

Mechanical removal without chemicals

The extractor works mechanically, so it does not require the use of herbicides. It will work on lawns, rebates and in gardens where you want to remove individual weeds spot, without spraying a larger area.

What are you gonna use the picker for?

For lawn – removing individual weeds without digging through a large area.

To discount – precise pulling of weeds between ornamental plants.

To the plot – care of paths, beds, edges and green areas.

For dandelion – removal of weeds with long pile root.

For weeds at paths – plucking plants from the ground at the edges and edges.

For a garden without chemicals – mechanical weed reduction without spraying.

For care after rain – moist substrate makes it easier to pull out roots.

How to use?

1. Set the tool over the weed

Position the picker head directly over the center of the plant so that the claws cover the weed as close to the root as possible.

2. Put your claws into the ground

Press the tool with your foot using the auxiliary foot. Claws should enter the substrate around the plant.

3. Tilt the handle

Pull the handle toward each other so that the claws tighten around the weed and root. Then pry the plant by pulling it out of the ground.

4. Remove weed from head

After pulling out the weed, use a movable trigger to pull the plant out of its claws without touching it with your hand.

5. Align the place after weeds

After work, you can lightly press the ground or add soil in place after larger roots, especially on the lawn.

Where will it work best?

On the lawn – with individual weeds that spoil the appearance of turf.

In the backyard garden – for regular care without manual weeding.

On the recreational plot – by paths, discounts, beds and green areas.

For decorative discounts – where precision and caution with plants count.

At the periphery and edges – in places where weeds grow pointwise.

In natural gardens – for reducing weeds without the use of chemical spraying.

Practical tips

The easiest way to remove weeds after rain or after watering when the soil is slightly damp. Then the root comes out of the substrate more easily, and the risk of breaking it is lower.

With large weeds, it is worth aiming exactly at the center of the plant. Claws should enter the ground as close to the root as possible to capture it as deep as possible.

On very dry, compact or rocky soil, work may require more force. In such conditions, it is better to moisten the substrate slightly first.

After finishing the work, clean the claws from the ground and plant debris. The tool is best stored with the cover on the working part.

Important information

The picker is designed to mechanically remove weeds from the soil. Do not use it as a crowbar, pickaxe or tool to pry stones, tree roots or hard substrate elements.

The effectiveness of weed removal depends on the type of plant, root length, soil moisture and the accuracy of the tool setting. For very deep or branched roots, you may need to repeat the procedure.

After use, the tool should be cleaned and stored in a dry place. Claw cover increases safety during storage.

FAQ – Frequently Asked Questions

1. What is the Shark Tools picker used for?

For mechanical removal of weeds together with the root from the lawn, flower bed, garden and plot.

2. Can you work without bending down?

Yes, the adjustable handle allows you to remove weeds in a standing position.

3. What is the length of the tool?

The length of the handle can be adjusted in the range of 100 – 116 cm.

4. Does the tool remove weeds with roots?

Yes, the claws dig into the ground and grab the plant along with the root.

5. Is it suitable for dandelion?

Yes, the picker will work well with dandelion and other weeds with a pronounced root.

6. Can it be used on the lawn?

Yes, the tool is suitable for spot weed removal from the lawn.

7. Do I need to use chemicals?

No, the picker works mechanically and does not require spraying.

8. Does the weed need to be pulled out of the claws with your hand?

No, the tool has a movable trigger that makes it easy to empty the head.

9. Does the picker have an auxiliary leg?

Yes, the folding leg helps drive claws into the ground and pry the weed.

10. Does the tool have a non-slip handle?

Yes, the handle has a non-slip surface for a more secure grip.

11. Is there a claw guard included?

Yes, the kit includes a blade/claw cover for easy secure storage.

12. When is the best time to remove weeds?

Preferably after rain or after watering, when the soil is slightly moist and it is easier to pull out the root.

Technical parameters

Product: weed picker

Manufacturer: Shark Tools

Type: telescopic weed cutter / weed removal tool

Adjustable length: 100 – 116 cm

Working mechanism: movable claws / pliers

Claw material: steel

Handle: adjustable, non-slip

Auxiliary foot: folding

Head emptying trigger: yes

Claw cover: yes

Product weight with packaging: approx. 5 kg

Manufacturer code: Telescopic weed picker SHARK TOOLS

EAN: 5900644530282

Package condition: original

Condition: new

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With VAT invoice
Parametry	Brand	Shark Tools
Parametry	Handle material	stainless steel
Parametry	Head material	stainless steel
Parametry	Tool weight	1.68 kg
Parametry	Tool length	116 cm
Parametry	Product weight with unit packaging	1.7 kg
Parametry	Manufacturer code	Wyrywacz do chwastów teleskopowy SHARK TOOLS
Parametry	EAN (GTIN)	5900644530282
Parametry	Packaging status	original