Televizoriaus laikiklis, 64 cm, 32–55" su 90° pasukimu

Trumpai apie prekę

Prekė: Televizoriaus laikiklis, 64 cm, 32–55" su 90° pasukimu. Kategorija: Rankenos.

• Gamintojas: Vetouson
• Modelis: VX-200X Uchwyt do telewizora 32 42 43 48 50 55 cal

• ➡ Extra long 64 cm arm - will allow you to rotate the TV to any angle. You can set your TV (up to a width of 104cm) even perpendicular to the wall.
• SAFE strong hardened steel - construction recommended by TV installers
• Full range of vertical and horizontal adjustment
• ➡ Installation on 6 pins (this is an additional option *)
• ➡ Wide wall plate for even distribution of TV weight
• Strong joints and perfect powder coating
• TV mount with corner installation option. It also allows installation on direct walls.
• ➡ It is possible to install both on the right and left side
• ✅The mount is universal and fits all the most popular TV models
• ➡ The holder also fits TVs with a curved housing
• ✅Packaging includes full set of mounting accessories (including pegs, screws, washers needed to screw the mount to the wall and screws and washers needed to screw the TV to the mount

✅SPECIFICATIONS:

• TV size: 32"- 55"
• Maximum TV weight: up to 20 kg
• VESA: 75x75, 100x100, 100x200, 200x100, 200x200, 200x300, 300x200, 300x300, 400x200, 400x300, 400x400, 200x400, 300x400 mm and all intermediate sizes
• Swivel adjustment left/right: +/-180° with 3 pivot points
• Mount with corner installation option
• Tilt adjustment up/down: -15° / +15°
• Adjustable distance from wall: 86 - 640 mm
• Strong and robust construction
• Includes spirit level
• Full set of mounting accessories
• Mount made with attention to detail
• Color: Black

✅Full range of rotary adjustment

• enables corner installation and from any other angle as well as in front of the wall
• adjustment of the distance from the wall in the range of 86-640 mm
• the ability to rotate the handle in the range of +/-180°
• the ability to set any position of the TV both very close and far from the wall
• ➡ full 90° rotation will be achieved for a TV with a width of less than 104 cm

✅Set any TV position

• Close or very far from the wall
• Extra long 64 cm arm - will allow you to rotate the TV to any angle. The rotation of the TV will no longer be blocked by too short an arm.

✅Up/down adjustment

• up/down tilt adjustment: -15° / +15°

✅DESTINATION

• Living rooms, rooms, offices, rooms where it is necessary to turn the TV by a significant angle, e.g. 90 degrees or the need for a significant distance of the TV
• The mount allows you to achieve a large angle of rotation, and for TVs narrower than ➡ 104 cm even a full 90 degree rotation
• The mount allows for significant distance of the TV from the wall, e.g. to set a better TV position
• The handle can be installed both in front of the wall and in the corner (thanks to the long arm)

✅Reliability and safety

• Made of thick hardened steel
• Elegant even perfect powder coating
• You can install the mount on ➡ 4 or 6 pins (to hold the TV even better). Attention! The set includes 4 pegs and if someone decides to screw the handle on 6 pins, the additional one must be purchased on their own.
• ➡ Wide wall plate for even distribution of TV weight
• Strong joints and perfect powder coating

✅Assembly on two sides to choose from

• The handle can be installed both so that the arm comes out on the right or left side - to choose from

✅Handle leveling

• The handle allows you to adjust the level in the range of -5° / +5° needed e.g. when not drilling holes in the wall very accurately. Correction is done by loosening the 4 screws visible in the photo (below the level)

Attention!

The mount is designed for users who use a single TV setting. When using several settings at the same time, e.g. once the TV is at the wall itself and other times the TV perpendicular to the wall, we are not able to level the TV for both settings at the same time. The handle has a leveling adjustment through 4 screws but a new level adjustment is necessary for each change of setting. Therefore, we offer this mount for people who once set the TV and later do not change its position.

✅DESTINATION

• The handle is universal and can be installed on all the most popular TV brands, which have VESA mounting hole spacing in the range : 75 x 75 to 400 x 400 mm and weigh up to 20 kg
• VESA standard - universal
• ➡ The holder also fits TVs with a curved housing

✅Additional blockage

• The holder includes an additional mechanical lock to protect the TV from accidental knocking down

✅Wide wall plate that evenly distributes TV weight

• If you already have your new TV, you know it's really big, which is why a wide wall plate is so important. It allows for mounting the bracket using up to➡️ 6 anchors if needed (we include 4 anchors in the set; if you decide to mount the bracket with 6 anchors, you will need to purchase the additional ones yourself). This ensures even weight distribution on the wall, which is especially important for less solid and strong walls.
• The wall plate includes one larger opening with dimensions width x height 105 x 227mm

✅SET COMPOSITION

• ➡ handle with necessary mounting accessories
• ➡ simple and intuitive installation
• mounting accessories for wall mount:

• Screws M6X50 4 pcs
• Dowels M6X40 4 pcs
• Washers for studs/screws 4 pcs
• TV mount mounting accessories:
• Screw for TV/monitor installation M5X16 4 pcs (choose the screw suitable for the holes in your TV)
• Screw for TV/monitor installation M5X30 4 pcs
• Screw for TV/monitor installation M6X16 4 pcs
• Screw for TV/monitor installation M6X30 4 pcs
• Screw for TV/monitor installation M8X16 4 pcs
• Screw for TV/monitor installation M8X30 4 pcs
• Screw washers M5/M6/M8 for the above screws 4 pcs
• Bushing/distance 14mm 4 pcs - for TVs with recessed mounting holes
• instruction in Polish

The mount includes a universal set of TV mounting screws that fits most TVs on the market. It may happen that your TV will need other screws, then you need to purchase them on your own.

Specifications