Užvedimo laidai HT 800A, 4 m + pirštinės

Trumpai apie prekę

Prekė: Užvedimo laidai HT 800A, 4 m + pirštinės. Kategorija: Užvedimo laidai.

• Gamintojas: no brand
• Ilgis: 4 m

WIRES JUMPER CABLES 800A HIGH QUALITY

TECHNICAL DATA:

• maximum current: 800 A
• cross-sectional area : 20mm2 (copper cable in rubber insulation),
• Number of wires in the wire - 283 pcs. Copper wire diameter - 0,3 mm
• length of electrical wire: 2 x 4 meters
• wide spacing frog clamp, coated - this guarantees maximum current conduction
• cables are packed in practical packaging

HAVE A CE CERTIFICATE

INSTRUCTIONS FOR USE OF JUMPER CABLES:

• Starting a vehicle with a discharged battery using a battery from another vehicle. Connection: The red cable plugs into the positive pole (plus) of both batteries. The black cable connects to the negative pole (minus) of the "donor" battery and to the metal, unpainted element (mass) in the vehicle with a discharged battery. Connection order: First plus, then minus. Disconnection order: Contrary to connecting. Warnings: Care should be taken to avoid short circuits and sparks. Connecting wires to the battery in vehicles with modern electronics requires special care not to damage the electrical system. Do not connect the black cable to the negative pole of the discharged battery, and to the mass.

IMPORTANT! The use of jumper cables in a inny manner than in the instructions can lead to serious damage to health and property. When connecting cables to the battery, a flammable explosion-threatening mixture of gases (hydrogen and oxygen) is created. Provide adequate ventilation in the room where you use jumper cables. Do not bend over and burn over the battery. Only proper use of cables ensures their long-lasting performance.

06-05-UN-222-AKC

06-05-UN-183-NEX

06-05-UN-314-POZ

Specifications