Vaizdo stebėjimo rinkinys su 4 WiFi 4MPX pasukamomis kameromis ir bazine stotimi, 4x priartinimas

Trumpai apie prekę

Prekė: Vaizdo stebėjimo rinkinys su 4 WiFi 4MPX pasukamomis kameromis ir bazine stotimi, 4x priartinimas. Kategorija: Rinkiniai.

• Gamintojas: ieGeek
• Modelis: ZESTAW DO MONITORINGU WIFI 4 KAMERY

ieGeek 4MPx IP POE SURVEILLANCE KIT 4 FULL HD CAMERAS PREVIEW APP DETECTION

The package includes:

• 4 × 4MPx surveillance camera
• 1 × base station
• 1 × 5V1A power supply
• 2 × USB cable
• 4 × camera bracket screws
• 4 × camera bracket nuts
• 1 × 1 meter long network cable
• 4 × positioning sticker
• 1 × instruction manual

100% cable:

The camera has a built-in rechargeable battery and an integrated solar panel, which eliminates the need for an external outlet. If there is not enough sunlight at the installation site, an additional solar panel can also be connected.

300° protection and wide surveillance area:

Not only is the camera easy to install, but it can also cover a large area of surveillance. The camera can be rotated vertically 90° and horizontally 180° by controlling it via the app. Make sure there is no blind spot in the monitoring area.

The camera has an HD lens with a resolution of 4 MP, so that every detail of the video is clearly visible. In addition, each camera has four built-in headlights, so that the cameras record with the same clarity even at night. They can also be set to black and white infrared night vision when not required.

Easy operation:

To save energy, the camera is inactive under normal conditions, but when motion is detected, the camera immediately wakes up like a guard. The app immediately receives a warning message, and the camera can also trigger an alarm to deter unwanted people.

The built-in memory card with a capacity of 64 GB is pre-installed in the base station, where you can safely and locally store all video data. There is no additional cost if the cloud service is not in use. You can also use memory cards with a maximum capacity of up to 512 GB.

Battery-powered surveillance camera base station

4CH HD Base Station:

Possibility to connect up to 4 cameras. Pre-installed 64 GB memory card

4 MP HD surveillance camera:

Built-in rechargeable battery, Fully wireless thanks to integrated solar panel.

Easy installation

No complicated wiring. Just punch a hole and mount the camera (test the camera next to the base station before mounting it on the wall).

Built-in solar panel

The innovative design provides higher transmission of sunlight (additional solar panel can be connected if there is no sunlight at the installation site).

100% wireless: built-in solar panel

Built-in solar panel minimizes losses during solar energy transmission. If there is no sunlight at the installation site, the camera can be connected to an additional solar panel.

Install once, drill once: Easy installation

The camera is easy to install without any specialized knowledge. The camera must be tested before installation.

Customizable private area

The private area can be blocked.

Night vision

Possibility to set black and white IR mode and color night vision mode.

Resistance to weather conditions

The camera can be used outdoors in all weather conditions.

Memory card installed

Integrated 64GB memory card for video storage

• 1. the camera has been factory connected to the base stationPlease do not press the reset button after receiving the product to avoid losing the connection by the camera.
• 2. Before use, fully charge the camera with a 5V1A/2A power supply to avoid subsequent power outages.
• 3. Before installing the camera, connect the base station to the app to make sure each camera is properly connected and the screen is displayed normally.
• 4. When installing the camera, make sure that the camera is not too far from the base station to avoid a weak signal.

Step 1

Connect the base station to the power supply and network cable

Step 2 Turn on the camera

Turn on the camera by pressing and holding the power button on the camera (not the reset button).

Step 3

Download the "ARCCTV" application, log in and scan the OR code on the base station.

Step 4

Open the app interface to view the camera’s live screen and camera settings.

Specification

• Lens: 4,0 mm 95°
• Resolution: 2560*1440P
• Angle of view: 95°
• PIR detection: 8 meters, 100° angle
• Compression: H.265
• Number of frames per second: 15fps
• Code stream: 32 kbps~2 Mb/s
• Audio Input/Output: Built-in microphone+speaker
• Day/night switching: Automatic switching (ICR)/Color/B&W
• Minimum lighting: Colour 1Lux Black and white 0.01Lux
• Wide dynamic range: Digital wide dynamic range
• Distance of night vision: 15M
• Alarm triggering: PIR + personal, motion detection alarm
• Interface protocol: private
• Wireless standard: 2.4G WiFi (IEEE802.11b/g/n)
• Video security: user authentication, software encryption
• Device system: iOS 8 or later version, Android 4.2 or later version
• Working environment: Temperature: -10 ℃ ~ 50 ℃, humidity below 90% (non-condensing)
• Power supply: Type C DC 5V/1A interface
• Battery: 5000 mAh lithium-ion battery (2 x 18650)
• Standby time: 6 months
• Working time: 2 months (20 wake-ups per day)
• IP rating: IP65
• Memory: SD card (maximum 128G), support cloud storage

Specifications