Vandens diafragminis siurblys, 10 bar, 12V, 10A, 120W

Trumpai apie prekę

Prekė: Vandens diafragminis siurblys, 10 bar, 12V, 10A, 120W. Kategorija: Siurbliai ir hidroforai.

• Gamintojas: no brand
• Modelis: 034917

Function:

The product is characterized by stable and reliable performance and long service life.

The product has overcurrent protection and is safer to use.

120W, large output power, maximum lifting height of 130m.

The product is compact and atwy in assembly.

The theoretical pump flow rate can reach 10L/m.

The products are widely used in: high-pressure washers, water sprayers, pesticide spraying, garden watering, tensioners and other equipment.

Specification:

Maximum power: 120 W

Maximum pressure: 13 KG

Operating pressure: 8G

Opening flow rate: 10L/m

Vertical suction: 1,5 m

Lift: 130m

List of packages:

1 * pump

1 * Mesh Filter

1 * pump holder;

3 * mounting screw

1 * Spare fuses

Note:

1. The actual color of the product may differ from the photo due to the world.

2. There may be a slight deviation in the measurement of the product.

3. Please note that this product does not have a faucet control feature.

4. If the product is connected to the faucet, make sure that the faucet is turned on. If the faucet is not unscrewed, the pump will be dry and the pump will be burned.

Guide to operations:

1. Connect the pump to the inlet and outlet pipes. Make sure that the connection between the inlet and outlet pipe and the pump is tight, otherwise it will cause low pressure or water leakage. (Hint: there are arrows on the pump cover indicating the direction of water supply and drainage, and the direction of the arrow is the direction of water drainage)

2. Install the filter at the inlet end and the filter density is preferably above 80 mesh. (i.e. 80 holes per square centimeter)

3. Connect the micromembrane pump to the engine. The electrical parameters of the connected power supply must meet the input requirements of the motor.

4. Turn on the power and the pump motor will start working.

5. The water is discharged for 5~10 seconds, drain the air from the pump and pipeline. Once the water has stabilized, temporarily turn off the power and connect the water gun or pump gouge.

Specifications