Vandens filtras visam namui, mechaninis, 1", smėlio ir nuosėdų šalinimui

Trumpai apie prekę

Prekė: Vandens filtras visam namui, mechaninis, 1", smėlio ir nuosėdų šalinimui. Kategorija: Vandens filtrai ir minkštikliai.

• Gamintojas: no brand
• Modelis: FHPRCL1-B-AQ-MECH
• Talpa: 0 l

Three-stage in-line set by AQUAFILTER with a set of mechanical inserts. The system reduces the level of mechanical impurities: sand, rust, suspensions, not less than 5 micron.

Contains the best mechanical cartridges from GRENN FILTER on the market. The filter is equipped with a 1" connection and can be installed at any "point of use" e.g. directly under the sink to improve the quality of consumer water, as well as at the entrance of water to the entire installation.

Crack-resistant PET material bodies ensure trouble-free operation. The bodies included in the set are equipped with a double sealing o-ring, this solution guarantees excellent tightness of the connection and work safety.

The kit on sale is offered with a 1” brass connection and a vent that helps release the accumulated air in the filter, accumulated after replacing the filter cartridge.

The vent has a brass thread embedded, so there is no damage, in the case of repeated unscrewing and unscrewing of the valve.

The brass insert is made of high quality materials (for sealing threaded joints, tows must not be used).

Transparent housings allow you to quickly identify the state of contamination of cartridges.

BACTERIOSTATIC TECHNOLOGY PROTECTS THE SYSTEM AGAINST THE DEVELOPMENT OF BACTERIAL FLORA:

The in-line bodies in the set include bacteriostatic centering discs, which make it easy to install the cartridge. Thanks to the disk, there is no damage to the cartridge and head. The discs were made in a special bacteriostatic BACINIX technology (prevents the development of bacterial flora).

Polypropylene nonwoven inserts

Polypropylene nonwoven inserts (probably the best mechanical inserts available on the market). In the set you will receive 9 pieces contributions.

• cartridges are resistant to the growth of bacteria,
• remove mechanical impurities such as sand, silt,
• made in modern technology "MELT-BLOWN",
• Cartridge life – up to 6 months*.
• The kit removes contaminants with a grain size of up to 5 microns.

* the life of the cartridges depends on the quantity and quality of filtered water.

ACCESSORIES AND ELEMENTS INCLUDED IN THE SET

On sale, the set is offered with 9 inserts, as well as the following accessories:

• 3 x 20 micron foam cartridge.
• 3 x 10 micron foam cartridge.
• 3 x 5 micron foam cartridge.

The set also includes:

• key to the bodies,
• Teflon tape,
• bacteriostatic centring discs,

Technical information:

• dimension (H) x D. x L ): 390 mm x 160 mm x 430 mm
• lampshade material – PE
• head material – PP
• O-ring material – NBR
• Number of O-rings: 2
• bacteriostatic technology: yes
• Purpose: for tap water treatment*

*do not use for water from own intakes, well water, water of unknown origin, use only for filtration of tap water.

Specifications