Vandens minkštiklis 25 l, su druska, testu, kasetėmis

Trumpai apie prekę

Prekė: Vandens minkštiklis 25 l, su druska, testu, kasetėmis. Kategorija: Vandens filtrai ir minkštikliai.

• Gamintojas: Ocean
• Modelis: BNT 25
• Talpa: 25 l

NOTE! Until further notice, the softener will be available in white/blue housing.

We are pleased to present you a fully automatic water softener series WATERMARKET 25B with a modern and reliable control valve BNT1650F from the menu in Polish.

The system on sale is offered with an extended warranty package, which includes:

• 4 years on the head,
• 10 years for pressure cylinder and compact housing
• 5 years for softening bed*.

The WATERMARKET 25B system contains 25 liters of high-quality softening bed, which effectively removes water hardness and is a guarantee of getting rid of bothersome streaks on sanitary facilities, the systems also provide excellent protection of expensive household appliances against the harmful effects of "boiler stone".

We add the BY-PASS bypass valve to the WATERMARKET 25B system as standard. The faultless and user-friendly BNT1650F controller from the in Polish is extremely simple to program. The system head is equipped with a MIXING valve, which allows to obtain residual hardness at the output of water from the device.

The system is especially recommended for houses where up to 6 people live.

*in the case of installation of a system for tap water and use in the form of mechanical filter protection.

NOTE! Subject to availability, softeners will be available with a head panel in white or gray.

The WATERMARKET 25B system is made of high-quality components, thanks to which it is characterized by long and trouble-free operation. Effectively removes water hardness. Before leaving the factory, the system underwent many rigorous quality tests that confirm its reliability and reliability.

The WATERMARKET 25B system is a product of the Polish manufacturer, which uses a modern cylinder with a larger cross-section, which ensures much better operation of the unit and better and more accurate rinsing of the deposit, and thus extending its efficiency and service life.

The WATERMARKET 25B system is equipped with an automatic, trouble-free and user-friendly BNT1650F control head from the in Polish.

Thanks to the BNT1650F head, the device can work in two modes, volumetric (regeneration occurs after the passage of a given volume of water) or temporal (regeneration occurs "X" days).

The set also includes a BY-PASS valve, which can be used to carry out maintenance work without blocking the supply of raw water to the installation. The brine float valve provides effective protection against possible flooding.

The MIXING valve allows precise setting of hardness at the water output from the device.

The BNT1650F is one of the simplest heads available on the market. Programming is limited to setting:

• hours,
• language (in this case PL),
• interval between individual regenerations

PLEASE BE ADVISED THAT AS A FEW WE ALLOW THE INSTALLATION AND PROGRAMMING OF OUR SYSTEMS ON OUR OWN WITHOUT LOSING WARRANTY RIGHTS.

Advantages of the BNT1650F head:

• wide range of regeneration modes: volume delayed, volume instantaneous, temporal and time-volume.
• The ability to change the time of individual cycles, which can positively result in lower water consumption, lower flush emissions and lower consumption of the regenerator.
• Possibility of immediate regeneration.
• Possibility to interrupt the rinsing process at any time.
• No cut-off of the water supply to the installation during the regeneration process.

Ladies and Gentlemen, below we present a table on the basis of which you should set the amount of water between regenerations. Just enter the amount of m3 into the head and the device will automatically set individual intervals without your interference.

• 10 OdH (179,00 CaCO3 mg/l) - 7,12 m3
• 11 OdH (196,90 CaCO3 mg/l) - 6,47 m3
• 12 OdH (214,80 CaCO3 mg/l) - 5,93 m3
• 13 OdH (232,70 CaCO3 mg/l) - 5,48 m3
• 14 OdH (250,60 CaCO3 mg/l) - 5,08 m3
• 15 OdH (268,50 CaCO3 mg/l) - 4,75 m3
• 16 OdH (286,40 CaCO3 mg/l) - 4,45 m3
• 17 OdH (304,30 CaCO3 mg/l) - 4,19 m3
• 18 OdH (322,20 CaCO3 mg/l) - 3,95 m3
• 19 OdH (340,10 CaCO3 mg/l) - 3,75 m3
• 20 OdH (358,00 CaCO3 mg/l) - 3,56 m3
• 21 OdH (375,90 CaCO3 mg/l) - 3,39 m3
• 22 OdH (393,80 CaCO3 mg/l) - 3,23 m3
• 23 OdH (411,70 CaCO3 mg/l) - 3,09 m3
• 24 OdH (429,60 CaCO3 mg/l) - 2,96 m3
• 25 OdH (447,50 CaCO3 mg/l) - 2,85 m3
• 26 OdH (465,40 CaCO3 mg/l) - 2,74 m3
• 27 OdH (483,30 CaCO3 mg/l) - 2,63 m3
• 28 OdH (501,20 CaCO3 mg/l) - 2,54 m3
• 29 OdH (519,10 CaCO3 mg/l) - 2,45 m3
• 30 OdH (537,00 CaCO3 mg/l) - 2,37 m3

• OdH - unit of water hardness degree expressed in German degrees.
• CaCO3 - unit of water hardness degree (most commonly found on the Polish market) expressed in mg/l.

At the same time, we would like to inform you that the BNT1650F head is fully configurable and it is possible to manually set the times of individual cycles.

Time of individual cycles (water supply).

• C1 (p. retrograde): 5 minutes,
• C2 (salinity): 60 minutes,
• C3 (p. fast): 5 minutes,
• C4 (water replenishment): 10 minutes (check whether the device adds 10 - 12 liters of water in C4. If the device adds too little water, extend the C4 cycle time, if the device adds too much water, shorten the C4 cycle time.

Technical information:

• Head: BNT1650F (new type), volumetric - temporal, with menu in PL
• Number of beds: 25 liters - polyspheric resin
• Power supply: 220-240 V / 50-60 Hz (power consumption: 9W)
• Hydraulic connection: 1" BSP
• Operating temperature: 2 OC - 39 OC
• Operating pressure: 1,4 – 8,6 bar (pressure drop: 0,3 bar)
• Maximum flow rate: 1,8 m3/h
• Average salt consumption/bed regeneration: 3,8 kg
• Original BY-PASS valve with connection lock with the possibility of quick disassembly from the installation.
• Connection length BY-PASS (bypass) - 125 mm.
• Double anti-flood protection: float valve (cut-off) installed in the brine tank and overflow knee.
• A cylinder with a larger cross-section guaranteeing better operation, efficiency of the device and better flushing of the deposit.
• NOVARAM internal memory: maintaining head settings in the absence of power for 48 hours.
• MIXING valve for mixing raw (hard) water with soft water.
• Possibility of working in time mode: hygienic protection forcing regeneration of the deposit in case of prolonged non-use of the system.
• Backlit LCD panel displaying the necessary information such as: current date, time, as well as volume of soft water to download, until the next regeneration mode,.
• Detailed instructions for assembly and programming.
• Full telephone support (before and after sales): remote, help our service during the first start-up of the device, as well as during the full life of the system.
• Free selection of the right unit based on your water consumption and water hardness.
• KIP CODE: ZMWM-OCBNT-25MD-BN7B

  Please be advised that we have all consumables and spare parts in stock.

Secure, FREE t_r_a_n_s_p_o_r_t on pallet, warranty d_o_s_t_a_w_y without damage.

When deciding to buy a water softener or other larger device, it is worth taking care of its safe d_o_s_t_a_w_a. That is why we ship our products on a pallet. This ensures that your equipment arrives intact.

During the traditional w_y_s_y_ł_k_i k_u_i_e_r_s_k_i_e_j (devices are repeatedly reloaded – from the car to the sorting room, from the conveyor belt to the next car, and along the way exposed to drops, bumps and crushing with other packages. This is when mechanical damage occurs most often.

T_r_a_n_s_p_o_r_t on the pallet eliminates this risk:

• No multiple reloading – the z pallet is loaded and unloaded in its entirety, without the need to change or move.
• Stable protection – the product is immobilized, wrapped in stretch film and additionally protected against displacement.
• Crush protection – the device does not go to t_a_ś_m_o_c_i_a_g or is placed under other packages.
• Professional service – t_r_a_n_s_p_o_r_t p_a_l_e_t_o_w_y is treated as a size, so drivers and warehousemen handle them more carefully.

WHEN YOU BUY WATERMARKET 25B YOU WILL RECEIVE AN ADDITIONAL FREE.

• 1 in-line set: in-line body with plate and key.
• 12 foam cartridges (stock for several years).
• 1 droplet water hardness tester.
• 25 kg (bag) of tablet salt.
• 5 mb. flexible hose for draining rinses.
• 2 x Hose Mounting Clip.

At your request, we are able to install the device for a fee and perform the first start-up.

We provide assembly services throughout the country. The cost of assembly and first commissioning is determined individually with each customer and depends on the area in which the device will be installed.

We cordially invite you to place orders and inquiries.

Specifications