Vandens siurblio atbulinis vožtuvas, 250 W, hidroforui ir šuliniui

Trumpai apie prekę

Prekė: Vandens siurblio atbulinis vožtuvas, 250 W, hidroforui ir šuliniui. Kategorija: Siurbliai ir hidroforai.

• Gamintojas: Rohtenbach
• Modelis: 5903887249805

HYDROPHORE PUMP WE250 230V

WE250 is a compact hydrophore pump designed for water supply of domestic installations. It will be perfect both in single-family houses, as well as in recreational houses or garden plots.

The device has been prepared for pumping clean, cool water sucked from intakes up to 8 meters deep. The pump design uses an integrated check valve located directly in the housing.

Strength and long service life is ensured by a massive cast iron housing, while working elements made of brass are responsible for stable and trouble-free operation for a long time.

Despite its small size, the pump generates a high operating pressure of up to 3,5 bar. Thanks to this, a strong and distant stream of water is obtained, which is perfectly suited, e.g. for watering the garden or flushing dirt from the car.

TECHNICAL PARAMETERS OF THE PUMP:

• Type: surface pump, peripheral pump, self-suction pump
• Engine power: 250 W
• Power supply: 230 V
• Maximum lift: 35 m
• Maximum capacity: 35 l/min
• Power consumption: 1,6 A
• Suction capacity: 8 m
• Connection connectors: 1" × 1"
• Dimensions (L. /h. /width. ): 26,5 × 22,5 × 18 cm
• Weight: 6,4 kg
• Maximum liquid temperature: 35°C
• Maximum ambient temperature: 40°C
• Insulation class: B
• Operating mode: continuous
• Degree of protection: IP44
• Engine speed: 2850 rpm /min
• Pump body: cast iron
• Shaft: Stainless steel AISI 304
• Impeller: brass
• Mechanical seal: ceramics / graphite / NBR

Application

• Water supply of single-family houses
• plots and cottages
• raising pressure in water installations
• powering irrigation systems
• cooperation with tanks and hydrophore machines

The pump has been factory adapted to connect the pressure switch/switch, which is why the power cord is terminated with eye connectors of the "fork" type. In addition, the set includes a cable with a plug for a standard outlet.

Simple operation - plug in and work

This is not equipment where you need to study the instruction for half a day. The pump is self-suction, which means that after the first flooding sucks water and starts working. It does not need to be constantly vented or guarded every time it is started.

The standard 1 inch connections make it easy to connect to most hoses and installations available in supermarkets and plumbing stores. The pump can easily work both independently and with a hydrophore tank or automatic, which makes it very versatile.

A power that is enough for everyday needs

The 250-watt motor is the perfect compromise between efficiency and low power consumption. The pump can easily handle watering the garden, powering several water intake points or raising the pressure in the installation. The maximum lift of up to 35 meters allows for comfortable use even when the well is a bit further or lower.

Thanks to the peripheral design, the pump produces high pressure, which will be especially appreciated by people who have a problem with a "weak stream" of water.

Sturdy, heavy, decent - not a plastic toy

The pump body is made of iron and the rotor is made of brass, which means high durability and wear resistance. This is not a lightweight plastic pump that lands in a corner after one season. EC 250 is a piece of equipment that has its weight and which is made for longer use.

The stainless steel shaft and solid mechanical seal make the pump well withstand normal, everyday work on the plot or at home.

Safe operation and user peace of mind

The pump has thermal protection, which protects the engine from overheating. If an emergency occurs - lack of water or overload - the device will protect itself. This is especially important for people who just want to turn on the pump and not worry about anything happening.

The pump is adapted to continuous operation, so it can easily work for a long time when watering the garden or filling tanks.

Ideal for allotment gardener, gardener and home

The WE 250 pump is a very good choice for:

• owners of plots and cottages
• people watering the garden or greenhouse
• users of wells and water tanks
• people who want to improve the pressure in the installation
• Those who want simple, proven equipment

Summary

If you are looking for an affordable, simple and robust pump that will do the job without combination, then the WE 250 will be the right choice. This equipment is for people who value simplicity, reliability and normal service, not fairy tales that break down after the season.

You plug in, you flood, you turn on - and the water flies. Exactly as it should be.

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With a VAT invoice
Parametry	Manufacturer	Rohtenbach
Parametry	Pump type	surface
Parametry	Engine power	250 W
Parametry	Product weight with unit packaging	8 kg
Parametry	Manufacturer code	5903887249805
Parametry	EAN (GTIN)	5903887249805
Parametry	Batteries included	no
Parametry	Maximum pump output	2100 l/h
Parametry	Packaging status	original
Parametry	Certificates of conformity	CE,WEEE