Vandens siurblys su smulkintuvu MAPOWER, 750 W, tinkamas švariam ir nešvariam vandeniui, su plūde

Trumpai apie prekę

Prekė: Vandens siurblys su smulkintuvu MAPOWER, 750 W, tinkamas švariam ir nešvariam vandeniui, su plūde. Kategorija: Siurbliai ir hidroforai.

• Gamintojas: MAPOWER
• Modelis: MPWP03

► Powerful motor 750W ► Float ► With shredder ► Thermal overload protection ► High build quality ► 10-meter power cable ► Economical and efficient 11000l/h ► IPX8

Technical data:

• Model: MPWP03
• Power: 750 W
• Power supply: 230 V / 50 Hz
• Capacity: 11000l/h - 11 m³/h
• Maximum stamping height: 10 m
• Max. suction depth: 7 m
• Maximum pressure: 1 Bar
• Max. Water temperature: 35°C
• Dedicated hose: 2''
• Degree of enclosure protection: IPX8
• Cable length: 10 m
• Dimensions: 39x14 cm
• Pump weight: 13,85 kg
• Pump weight with packaging: 14 kg
• Purpose: for dirty water

✅ Pump with SHREDDER and float for SPECIAL TASKS!

Perfectly suited for:

• pressing of domestic wastewater,
• pumping of the contents of tanks with slurry, liquid fertilizers or leachate,
• removal of contaminated water with sand, silt, leaves and other particles,
• work with water contaminated with organic residues,
• pumping water from ponds, canals, ditches.

and much more!

✅Powerful engine for efficient operation

• The pump has a EFFICIENT MOTOR WITH A POWER OF 750 W.

• Thanks to this, it obtains HIGH OPERATING PARAMETERS and works perfectly in heavily contaminated water.

• You can easily pump water to HEIGHT 10 m and suck it UP TO 7 m DEEP.

• WITHIN AN HOUR you will pump up to 11000 l, which means that filling the pool or pumping water from the flooded basement will be done FAST AND EFFICIENT.

✅ Pump with SHREDDER

► MAPOWER pump equipped with a BLADE SHREDDER, thanks to which you can easily pump a septic tank or slurry.

► Perfectly SHREDS solids in the liquid before pumping it.

► It has the form of a ROTOR WITH BLADES, which move at a powerful speed, cutting everything that can clog the pump.

✅ Functional FLOAT

► FLOAT in the water pump MAPOWER is a CONTROL ELEMENT that automatically turns the pump on and off in depending on the water level.

► When the water level rises, the FLOAT rises and STARTS THE PUMP, and when it falls below a certain level, the pump is turned off.

► Thanks to this solution, the pump works only when it is needed, which PREVENTS IT FROM DRY OPERATION AND PROTECTS IT FROM BLURRING.

✅ Dirty water pump MAPOWER has a high IPX8 WATER RESISTANCE RATING

► The designation IPX8 according to IEC 60529 means that the device is COMPLETELY PROTECTED against the effects of continuous immersion in water.

► The set includes a FAST-FIX CONNECTOR, thanks to which you can connect the fire hose in no time.

✅ THERMAL PROTECTION against overload - work ONLY WITH SAFE equipment!

The pump has a BUILT-IN PROTECTIVE MECHANISM, which automatically DISCONNECTS THE MOTOR POWER when the temperature of its windings exceeds a safe, acceptable level.

Specially designed SENSOR disconnects the electrical circuit, so that the engine stops working and begins to cool naturally.

✅ High quality workmanship

The pump is made of THICK CAST IRON.

Anti-corrosion material and solid workmanship makes the device WILL SERVE YOU TROUBLE-FREE MANY SEASONS.

✅ 10-meter power cord

► The long, flexible rubber hose in the pump is COMFORT OF WORK, SAFETY OF USE AND HUGE MOBILITY.

► This allows you to use the pump in PLACES AWAY FROM THE POWER SOURCE, without additional accessories.

► The cable has been made in accordance with VDE and H05RN-F STANDARDS, which guarantee HIGH STANDARDS OF ELECTRICAL AND MECHANICAL SAFETY.

► Cables marked VDE are subjected to STRICT RESISTANCE TESTS for punctures, short circuits, overloads and external factors.

► The insulation of this cable is made of EPR rubber, and the coating is made of chloroprene rubber. The conductor veins are copper, multi-wire and flexible.

The set includes:

• Pump for dirty and clean water MPWP03
• FAST-FIX connector
• Instructions for using in Polish

Specifications