Vandens sterilizatoriaus UV lempa TMA D6, 2,3 m³/val., baktericidinė

Trumpai apie prekę

Prekė: Vandens sterilizatoriaus UV lempa TMA D6, 2,3 m³/val., baktericidinė. Kategorija: Filtrai ir vandens minkštikliai.

• Gamintojas: TMA
• Modelis: D6
• Talpa: 2300 l

➡️ Nominal Flow Rate 2.30 m3/h (38 L/min) at 400 J/m2 Dose

➡️ Annual Electricity Cost for Continuous Heater Operation: 236.52 kWh = ~245 PLN

❇ Crystal clear water without chemicals! Discover the power of the TMA D6 UV sterilizer

➡ Are you tired of worrying about water quality in your faucet, chlorine odor, or bacteria problems in your home installation? The TMA D6 UV Sterilizer is a professional solution that turns ordinary water into safe drinking water – 100% natural and automatic.

➡ Designed for single-family homes, offices and cottages, destroys up to 99,9% of bacteria and viruses using the power of UV-C radiation. Safely, effectively and without affecting the taste and smell of water!

➡ Invest in the health of yourself and your loved ones with a premium device.

💡 Why choose the D6 instead of the D8?

Choosing the TMA D6 sterilizer is pure savings! Since the UV lamp has to work continuously around the clock, the D6 draws much less electricity than the larger D8 model. This translates into real, large savings on energy bills, while maintaining maximum water disinfection efficiency for your home.

💡 PRO TIP for installer!

Always wear gloves during assembly and do not touch the UV radiator with your bare hands. Skin contact with the surface of the radiator can lead to overheating and reduction of service life.

❇ Why choose the TMA D6 sterilizer?

✔ Deadly for microbes – UV-C rays permanently destroy the DNA of bacteria, viruses and fungi.

✔ An acid-resistant steel – a robust premium body, 100% safe for drinking water.

✔ Filament 27W – up to 16 000 hours (approx. 2 years) energy-efficient protection.

✔ Banana control – optical indicator allows for quick viewing of the lamp status.

✔ Replacement without tools – you can replace the filament quickly and without unsealing the hydraulics.

✔ Any installation – full flexibility of installation: vertically, horizontally or diagonally.

⬇ Real user reviews

✔ “After installation in a single-family house the water tests from the well finally came out perfectly. Recommend! ”

✔ “Water tastes great, you don’t feel any chemistry. The device operates maintenance-free. ”

✔ “Very ssolid construction, steel housing is impressive. Assembly went smoothly. ”

❇ How does UV-C technology work in 3 steps?

1 Water flow: Water from the installation flows into the interior of a durable body that can withstand pressure up to 10 bar.

2 Illumination: The TMA radiator emits waves of 253,7nm through a pure quartz shield, instantly neutralizing bacteria.

3 Clean water: Fully disinfected, safe and healthy water flows out of the device, ready for consumption.

❇ Choose your starter kit!

For the UV lamp, you can choose one of three packages that will facilitate proper installation and increase the effectiveness of protection:

• Set 1: UV lamp + in-line body (connection 1") – a mechanical filter against the lamp protects it from dirt particles.
• Set of 2: UV lamp + 50 g chloramine T – an ideal means to disinfect the installation and remove biofilm before starting the system.
• Set of 3 (Comprehensive): UV lamp + in-line body + 50 g chloramine T – full installation and cleaning package for maximum safety.

⬇ Frequently Asked Questions ❓

➡ Does the device have to work continuously?

Yes. To ensure maximum radiator life and constant safety, the lamp should be turned on around the clock, each switching on and off of the lamp reduces the life of the radiator by about 20 hours.

➡ Does UV radiation change the taste of water?

No. The UV method does not introduce any chemicals or chlorine into the water, so the water retains its natural flavor.

➡ Where is the best place to install a sterilizer?

It is recommended to install at the very end of the treatment system (behind mechanical filters or softener).

❇ What will you find in the set?

✔ Solid body – the highest quality acid-resistant steel.

✔ Power supply – a complete control system ensuring stable operation of the lamp.

✔ UV radiator 27W – efficient and energy-saving filament brand TMA.

✔ Curtain pipe – made of pure quartz for maximum radius permeability.

✔ Security muff – presses and blocks the quartz pipe against pressure, also acting as an indicator of work.

✔ Assembly key – a special key included for safe and strong tightening of the muff.

⬇ Technical specification of the lamp

• Nominal flow rate: 2,30 m3/h (with T transmission 10= 95%, dose 400 J/m2)
• Connection diameter: DN25 (R1")
• Number of radiators: 1 x 27 W
• Heater life: 16000 h (about 666 days)
• Material: acid-resistant steel 304
• Finish: satin (Ra< 0,8µm)
• Length: 66 cm
• Diameter:13 cm
• Weight with control system: 7,4 kg

⬇ Technical specification of the control system

• Power supply: 220V – 230V 50/60Hz
• Connection power: 28 W
• Protection class: IP 41
• Material: aluminium / ABS
• Dimensions: 39 cm / 8,3 cm / 7 cm
• Emergency system: none
• Remote on/off: none
• Sound indicator of UV radiator damage: none
• Optical sterilizer operating indicator: is
• Optical Radiator Damage Indicator: is
• Working time counter: none
• Removal for solenoid valve: none
• Emergency signal output: none

Specifications