Vėdinimo įrenginys CWP 200 UPPER su ion16 priešpriešinio srauto sistema

Trumpai apie prekę

Prekė: Vėdinimo įrenginys CWP 200 UPPER su ion16 priešpriešinio srauto sistema. Kategorija: Rekuperacinės vėdinimo sistemos.

• Gamintojas: no brand
• Modelis: CWP 200/150 górna

15 years of experience

Before you buy, watch the video https://www.youtube.com/watch?v=m8BvSsrRX5w

Ventilation unit recuperator + Nano XS controller

CWP 200/150 UPPER ION16

Contains:

• FAN WITH MAX CAPACITY UP TO 320 m³/h
• BUILT-IN IONIZER
• STUB DIAMETER: 160 mm
• MAX RPM: 2400 rpm
• CLASS FILTERS: G4
• COUNTERCURRENT RECUPERATOR: Pull-out, easy to wash
• RECUPERATOR EFFICIENCY: up to 92% (parameter depends on the difference in flow temperature)
• POWER OF THE DEVICE: from 30 to 90 W
• BUILT-IN AIR PURIFIER SYSTEM: Micro particles
• ANTI-ELECTROSTATIC SYSTEM
• HOUSING: Made of sheet metal 0,7 mm Alum-Zinc
• INSULATION THICKNESS: 30 mm (3 cm)
• SOUND INSULATION
• HEAT INSULATION FIREPLACE: High temperature resistant with aluminum jacket
• DRAINAGE OF LIQUEFIED WATER
• VERY GOOD VALUE FOR MONEY
• SPEED CONTROLLER
• OPERATING TEMPERATURE: -25 TO 50°C
• DRIVER
• RODENT-RESISTANT HOUSING
• HOUSING DOES NOT AGE: As made of plastic

POLISH PRODUCT

ECS has over 14 years of experience in manufacturing equipment for industry, providing solutions for the largest, renowned international companies. Each ventilation unit is created with care for well-thought-out solutions and proven technology, which guarantees the highest quality.

By choosing ECS products, you invest in proven technologies and high quality, which contributes to better air quality and savings on operating costs.

We add a driver to each control panel

The controller allows you to:

- turning on, turning off fans

- Enabling BYPASS

- reducing fan speed

- Increased fan speed

- change day/night modes (standard or reduced revolutions, the controller remembers the settings for both modes)

- LED ruler determining the level of rotation

- LED exclamation point to indicate failure

Housing

The housing is made of high quality thin alum-zinc sheets, galvanized on both sides. The sheets are precisely shaped on numerical machine tools and mounted with galvanized rivets, which creates a rigid and self-supporting structure. Thanks to the use of alum-zinc, surfaces in contact with ventilation air are perfectly protected and all elements of the housing are sealed. The housing is also acoustically and thermally protected with a 40-millimeter layer of wool.

Ionizer

The task of the ionizer is to naturally purify the air from pollutants such as mites, anaerobic bacteria, dust, cigarette smoke, pollen, etc. The ventilation system with recuperation allows for up to 8 times reduction of ventilation heat losses.

Negative ions help:

• Remove bacteria, viruses and fungi
• Facilitate breathing
• Clean and refresh the air
• Accelerate recovery and rest
• Increase concentration
• Facilitate learning
• Improve physical condition

Filter

• G4 class filter: non-woven fabric used on both exhaust and air supply.

  Low price: replacing the non-woven fabric itself costs only PLN 2-4.

  Flexibility: the ability to configure filters from G1 to U15 (even those used in operating rooms).

  Ability to combine filters: e.g. G4+F9+H14 for better filtration.

  Industrial use.

Specification:

• Control panel capacity: up to 180 m³/h (SEE CHARACTERISTICS BASED ON THIS THE CONTROL PANEL IS SELECTED)
• Power: min 30 W, max 90 W
• Pressure: up to 200 Pa
• Fan capacity: 2x320 m³/h
• Voltage: 230 V, 50 Hz
• Heat recovery efficiency: up to 92%
• Engine speed: 2400 rpm
• Noise level (dB(A) at 3 m): 24-40 dB
• Maximum operating temperature: up to 45°C
• Housing material: Alum-Zinc sheet 0,7 mm
• Insulation: Wool 30 mm
• Air supply filter: G4
• Extractor filter: G4
• Diameter of stubs: 160 mm
• Recuperator efficiency: up to a maximum of 92%
• Recuperator: Countercurrent, Plastic
• Anti-freeze system
• Weight: about 30 kg (Quality must weigh - compare with other products of this class)
• Dimensions: 275 x 580 x 970 mm
• Rotational speed controller

See the presentation of the MAX-VENT gen2 system, you can install it very easily, and from the channel on youtube Piotr Paruszewski you will learn how to do recuperation, how to mount devices, how to choose, how to design ventilation with recuperation and channel air conditioning--- ps it is not difficult, see and see for yourself

• System presentation: ▶ https://youtu.be/zwnY-pdrwj8
• Presentation of the entire GWC duct air conditioning: ▶ https://youtu.be/m8BvSsrRX5w
• Durability of our products: ▶ https://youtu.be/a3_OZIj2fLI
• See recuperation assembly course: ▶ https://youtu.be/ZMhyH29QXEY
• How to choose an exchanger for the air handling unit: ▶ https://youtu.be/PQYRlMa0cU4
• How to select and make intakes and launchers: ▶ https://youtu.be/JaYdZvX_Jl0
• How to choose a recuperator, ventilation units: ▶ https://youtu.be/T4-kbpZCiRg
• Great anemostat theory for ventilation recuperation: ▶ https://youtu.be/hmj_Zri58Wo
• Linear diffuser mezzanine how to do: ▶ https://youtu.be/zW6ewKM40F4
• Great theory of ventilation recuperation: ▶ https://youtu.be/TUGCt0jLmsk
• Theory of anemostat distribution: ▶ https://youtu.be/2DrL7inP8xA
• Anemostat distributions according to PN-83: ▶ https://youtu.be/tT88G79NqjE
• Connecting distribution boxes: ▶ https://youtu.be/Uq1FjNinR7U
• Anemostat placements according to FASHION FACEBOOK: ▶ https://youtu.be/qKcPhyyynKM
• Distribution of anemostats Paruszewski's ideas: ▶ https://youtu.be/TzhaNNL84hU

See the source of knowledge Learn a new profession, there are dozens of videos on the channel, hundreds of tips from a person with 20 years of experience, you will find a compendium of knowledge about ventilation, recuperation, etc...

Specifications